All it takes is one worn brake to throw your trailer off. Replacing a single ABS brake assembly restores smoother stopping and steadier tracking, so you stay in control on steep grades, in crosswinds, and during sudden traffic stops.
Note: These brake assemblies do not come with a sensor, you need to re-use your existing sensor when replacing your brakes.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this Electric 10-inch Left-Hand Trailer Brake Assembly for your Lippert ABS Hub. Now, this driver's side electric trailer brake is 10 inches by 2 1/4 inches, and it's made for your Lippert ABS Systems. And this is going to fit 13, 14 and 15-inch wheels, and this is going to be designed for your 3,500-pound trailer axle. And the mounting flange bolt is, bolt pattern rather, is going to be four bolts. And so the integrated sensor is going to make this a suitable replacement for hubs that use the Lippert ABS System.
As you know, electric trailer brakes are typically easier to install, and they offer more user control than hydraulic brakes. They require only an electric brake controller, so no actuator or hydraulic lines are going to be necessary with this. The automotive-grade friction material is molded to the brake shoes. The pads are fully bonded, they're not riveted to the shoes for longer life and more braking torque, so there's less chance of cracking and crumbling that can lead to a mechanical lockup thanks to the tapered edge and the circular grinding. Now, this is a self-adjusting brake, as I mentioned.
You can see this steel cable here that runs through this pulley, and then it's connected to the star wheel here. So, again, self-adjusting, but you can do fine-tuning if you desire, but that's not going to be necessary with this since it is a self-adjusting brake. The adjuster plugs are included to cover the access holes that keep dirt and grime out of the assembly and off the shoes. It's an e-coated backing plate here. It's gonna resist wear and corrosion.
This is QAI and CSA-certified, and I just wanted to bring my ruler up here again to confirm that measurement with you. So, as you can see that diameter running end of pad to end of pad, right at 10 inches, and the width of the pad is 2 1/4. Now, this does include the bolts as you saw, but it does not include the nuts and lock washers, so if you need to pick those up as well, we do have them. And just take that item number that you see there on your screen, pop it in the search field of our website, and that will take you to that hardware and you can add that to your order. One other thing I wanted to mention, this is, of course, the left-hand, the driver's side assembly, but if you need just the right-hand assembly instead of the left, we have that available, or maybe you need both the left and the right, we have those available as well.
So, we have just the right-hand or just this left-hand or the complete kit, so whichever one you need, just take the appropriate item number, and you'll get exactly what you need. Now, if you happen to have any other further questions, don't hesitate to reach out to us. We do wanna be sure that you're getting exactly what you want and need. Well, I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.