/
Demco/
Carts and Dollies/
Trailers/
Tow Dolly Parts/
Hub AssemblyItem # DM04369
Our Price: $147.90
This item qualifies for Free Shipping
Replaces the hub assembly for your Demco Kar Kaddy II, Kar Kaddy 260, Kar Kaddy 3, Kar Kaddy 360, Kar Kaddy 460 SS, Tow IT II or Penske tow dolly.
Features:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Video of Replacement Hub Assembly for Demco Kar Kaddy, Tow IT II, or Penske Tow Dolly - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the replacement hub assembly for the Demco Car Caddy tow dolly. This unit replaces the hub assembly for your Demco Car Caddy 3, or Car Caddy SS tow dolly. The bolt pattern is five on four and a half inches, and the diameter of the center hub flange is 2.755 inches. This is designed for an axle capacity of 3500 pounds, so that means that this unit individually has a 1750 pound capacity, and when paired with the one on the other side, then it would meet the requirements and have the load rating needed for an axle that has a capacity of 3500 pounds.Replacement is easy. This unit simply bolts to the flange on the spindle of the Car Caddy, using the old hardware or your existing hardware. And the mount holes on this unit go in this direction.
These are separated on center by two and three eighths inches, and then side to side this direction they're separated on center by three and one eighth inches. It's a nice, strong, durable design. Has protective finishing on it. That way you don't have to worry about rust or corrosion.That's gonna do it for today's look at the replacement hub assembly for the Demco Car Caddy tow dolly. Again, this replaces the hub assembly for your Demco Car Caddy 3, or Car Caddy SS tow dolly..
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
Replaces the hub assembly for your Demco Kar Kaddy II, Kar Kaddy 260, Kar Kaddy 3, Kar Kaddy 360, Kar Kaddy 460 SS, Tow IT II or Penske tow dolly.The bearing went out on my Kar Kaddy tow dolly over Labor Day weekend. No auto parts were open. This was Just what I was looking for. It was Exactly what was stated in the details and the measurements helped ensure it was what was purchased. Great value as well. 563115
Great!! We haul my car all over the country 9 months of the year. We put on thousands of miles and the bearings never get warm. Of course, regular maintenance including greasing helps too. This has been a great quality part.
Thomas - 09/08/2019
The bearing was great quality and easy to install. The people at etrailer where very helpful and had a good attitude. I have recommended etrailer every chance l get. Keep up the good work and Thank you very much. 521547
It is working just fine for me. No issues thanks again.
Lee T - 06/13/2019Was a hard to find item. Looked in numerous locations and was unable to locate the parts needed to repair the car hauler. The originals had no name or part numbers on them. An auto parts house suggested I try this sight where the needed parts were located. The parts were shipped right away and were a direct replacement putting this car hauler back on the road and returning an expensive piece of equipment to the work force rather than the junk pile. Fast and friendly service with a knowledgeable staff. 633511
Perfect fit. But the description states 1/2x20 studs. This one has metric studs. This was not a problem as I had some metric lug nuts on hand. 698422
I called Etrailer and and spoke with them and told them what I needed hub assemblies for my car dolly , I gave them some measurements they said this is what you need, wow I said well send them to me I installed them it was a perfect match I was happy. shipping was fast. hats off to you Etrailer thanks again. Ted 573973
was exactly what i needed.. was a perfect fit. could not find this hub assy. any other place.. will use again ! 518499
Exactly what we ordered. Fast free deli very. 429127
Looked all over for the parts for my tow dolly.Never found them.Shops wanted to charge 200 to 300 to make them.Got them here for less and they work perfect.Recieved them in less than a week too!!! GREAT company.THANKS etrailer 377576
Very fast shipping. 359414
Ask the Experts about this Demco Accessories and Parts
Do you have a question about this Accessories and Part?
Do you have a question about this Accessories and Part?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.