Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 4,000 lbs

Ask the Experts about this Fulton Accessories and Parts

• How to Determine Necessary Winch Strap Strength
  The working load limit (WLL) of the winch strap is the determining factor. The weight of your Sea Ray cannot exceed the WLL of the strap. A 4,000 lb, 2" x 20' strap such as the BoatBuckle # IMF05848 has a WLL of 1,333 lbs. The BoatBuckle # IMF14211 is 2" x 25' and has a WLL of 2,667 lbs.
  view full answer...
• Replacement Winch Strap for Fulton Boat Trailer Hand Winch
  We have a number of winch strap options for you to choose from. Most winch straps measure 2 inches wide, so the length of the strap and the working load limit are the factors to consider when choosing a new strap. If your OE winch is a Fulton winch, we offer the Fulton Heavy-Duty Winch Strap with Hook # FWS20HD0200. This winch strap is 2 inches wide x 20 feet long and offers a safe working load limit of 4,000 pounds with a break strength of 10,000 pounds. This winch works well on Fulton...
  view full answer...
• Replacement Strap for Fulton T1401 Trailer Winch
  Your Fulton T1401 winch uses a 2 inch wide strap like what the Fulton Heavy-Duty Winch Strap with Hook part # FWS20HD0200 you referenced provides. This strap is 20 feet as well which would be a great fit and application since your boat is 19 feet long.
  view full answer...
• Replacement Trailer Winch Strap Recommendation that is 20 Feet Long and 2 inch Wide
  For a replacement strap we have the # FWS20HD0200 by Fulton which is a 2 by 20 strap like you have that has a 10k capacity and a hook built into it. This would be a great option.
  view full answer...
• Replacement Strap for Fulton T1401 Trailer Winch
  Yes, you can use a 2" wide strap on your Fulton T1401 Trailer Winch. For this, I recommend the Fulton Heavy-Duty Winch Strap with Hook part # FWS20HD0200 which has a working load limit of 4,000 lbs. The Fulton T1401 Trailer Winch actually comes with a 2" wide strap and that is probably what you have now but it might not quite measure 2" wide as they do begin to narrow as time progresses.
  view full answer...
• How to Determine Needed WLL Capacity in Boat Winch Strap
  While you never want to exceed an item's working load limit (WLL) in your actual application, the nature of your trailer matters too when selecting a winch strap. If you have roller bunks rather than carpeted bunks this reduces friction and means that a given winch or strap could be strong enough. With typical wooden bunks and long winching distances (over 25-feet) the boat weight-to-winch capacity ratio is 1 to 1. But if your trailer uses roller bunks and shorter winching distances...
  view full answer...
• Recommended Trailer Winch Compatible With 2 Inch by 20 Foot Winch Strap with Hook
  The Fulton High-Performance Brake Winch - Cable Only - 2,500 lbs # F143201 is the replacement for the K2550 you mentioned, so I can't recommend either width strap with this winch. If you want to use a strap with a winch of similar size, I recommend the Dutton-Lainson Brake Winch with TUFFPLATE Finish, Self-Locking - 2,500 lbs. # DL15721 along with the Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 10,000 lbs # FWS20HD0200.
  view full answer...
• How to Choose the Correct Replacement Winch Strap for a Boat Trailer
  In order to recommend the correct replacement winch strap for you, I would need to know a bit more about your winch like the drum and weight capacity. The drum capacity will tell me what the max width and length is whereas the weight capacity will tell me what the strap needs to be rated for. For example, the Fulton Heavy-Duty Winch Strap with Hook part # FWS20HD0200 measures 20' long x 2" wide and has a 4,000 lb safe working limit. Please note that because the boat is considered a rolling...
  view full answer...
• How Does Strap Attach to Fulton Winch F142412
  To attach a strap to the Fulton winch part # F142412 you have to use a bolt to secure it to the drum. The part # FWS20HD0200 does not come with a bolt so you'd have to supply that or an easier option would be to go with a strap that has a bolt that comes with it like part # IMF05848. In the review video I attached you can see how the strap installs on the winch.
  view full answer...
• Recommended Winch to Raise and Lower Sailboat Mast
  What you are needing is a hand winch that will ratchet in both directions like the Fulton # F142101. This winch has a gear ratio of 4.1:1. This means to get this drum to turn one revolution you would need to crank this handle around 4.1 times. The winch has a 7" handle which makes for easy cranking and it uses a nylon rope or strap like you want. When raising the sail you can stop at any time while cranking. When lowering the sail you will want to make sure you keep control of the...
  view full answer...
• Which Winch Strap is Best for a 2007 Ranger Z20 Commanche Boat Trailer
  We have several safety straps for trailer winches, but I have not ran into the style with a 2nd safety catch. On my boat trailer I use the winch strap to bring the boat to the appropriate spot on the trailer and then have an additional short length of safety chain, with a hook, item # 2118-605-04, that is bolted to the winch mounting post, for an extra measure of safety, just in case the nylon strap breaks. You will need a hook that will fit in the bow eye with the winch strap hook in place. As...
  view full answer...
• How Does a Strap Attach to a Fulton T1401 Winch
  I believe that the holes in the drum are meant to wind a cable through but not a strap. The strap should be held on with a bolt that is close to the center of the drum. If you need the bolt then all you will need is a 1/4 bolt, 2-1/2 inches long, grade 5. You can get this bolt from a hardware store. You would want the type that has the threads just at the end for the nut so the strap is not worn down by threads.
  view full answer...
• Longer Strap Recommendation for Fulton 1,800 lb Winch
  Originally your winch came with a 2 inch wide 20 foot long strap. For a strap that would fit as a replacement and be 5 feet longer we have the Dutton Lainson part # DL24249 which is a great option that has a 4,000 lb capacity.
  view full answer...
• Will Strap Work With The Winch Installed On Boat Trailer
  You are correct. The winch you have on your trailer looks as though it is designed for a rope or cable, and not a strap. The winches we offer that use a strap use a bolt that goes through the sides of the drum and hold the strap in place when the winch is used. If you wish to use a strap, then I recommend or part # DL15440, that has a weight capacity of 3,200 lbs. This winch uses a strap much like the strap you purchased. If you do not wish to use a winch that uses a strap, I recommend...
  view full answer...
• Is Mounting Hardware Included With Fulton Winch Strap # FWS20HD0200
  The Dutton-Lainson Hand Winch, part # DL15440, is a 2-speed winch with a capacity of 3,200 lbs. The winch has a Zinc TUFFPLATE finish that will help resist corrosion. The Fulton Heavy-Duty Winch Strap with Hook, part # FWS20HD0200, will work well on the winch. It is a 2 inch X 20 foot heavy-duty UV-resistant strap that includes the hook. It does not have the mounting bolt needed to install on the winch. We do have a strap that includes the bolt and nut for installation that may work...
  view full answer...
• How Does Fulton Heavy-Duty Winch Strap with Hook, # FWS20HD0200 Attach to the Trailer Winch Drum
  The winch drum should have bolt near the center of the drum that can be removed. You would pull the bolt out and then re-install it through the looped end of a strap like Fulton Heavy-Duty Winch Strap with Hook, # FWS20HD0200. I have included a video below of a similar winch and strap that shows this process. Before attempting to install a strap on your winch, make sure that the winch can be used with a strap by checking the instructions and/or manual that came with the winch. The strap...
  view full answer...
• Replacement Winch Strap for 18,000 lb Sea Ray 370 Trailer
  For your Sea Ray 370, I recommend the Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 10,000 lbs # FWS20HD0200. This will be more than strong enough for your winch and boat trailer as you won't be pulling the entire dry weight of the boat without water supporting the majority of the weight or your carpeted bunks supporting weight and allowing assistance in guiding the boat onto the trailer.
  view full answer...
• What Material is Hook and Strap Made Of on Fulton Heavy-Duty Winch Strap with Hook # FWS20HD0200
  On the Fulton Heavy-Duty Winch Strap with Hook, part # FWS20HD0200, the hook is a forged zinc-plated steel material. The catch and the spring are zinc-plated. The yellow fabric, which is the strap, is a heavy-duty nylon webbing material that is similar to the material used in automotive seat belts.
  view full answer...
• Will the Fulton Heavy-Duty Winch Strap # FWS20HD0200 Work with the Fulton XLT Series 1800 lbs Winch
  Yes, the Fulton Heavy-Duty Winch Strap, # FWS20HD0200, will fit on the drum of the Fulton F2 Fully Enclosed Trailer Winch, # FW20000301. I spoke with my contact at Fulton to confirm that these items would work together.
  view full answer...
• Fulton Replacement Winch Strap for Profile 2000 Winch
  As long as the spool on your existing winch will accept a 2 inch wide strap, the Fulton # FWS20HD0200 replacement winch strap would work well for you.
  view full answer...
• Should Winch Strap Replacement be Same Width as Current Strap
  You'd want to replace the strap with the correct width that the jack takes. For example, the Fulton part # FWS20HD0200 fits a 2 inch wide drum which is by far the most popular. Most likely this is what you have and this would be what you need. I attached a page that has all of the winch strap replacements we offer as well.
  view full answer...
• Strap Recommendation for Dutton Lainson Strongarm Winch DL24870
  I wish I could say yes, but Fulton specifies that it's only designed for use on Fulton manual winches.
  view full answer...
• Winch Strap for Robalo 225 Boat with Dry Weight 5000 lbs
  The Fulton strap part # FWS20HD0200 that you referenced would work great for what you mentioned. This is 20 feet long and has a 4,000 lb capacity. With winches and straps you'd generally only need the capacity to be 50 percent of the total weight of the boat so a 4,000 lb weight rated strap would easily have enough capacity for a 5,000 lb boat
  view full answer...
• Winch Strap Replacement for Fulton XLT1401
  The Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs # DL24242 or the Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 4,000 lbs # FWS20HD0200 if you prefer yellow is my recommendation for your replacement strap. These are the same length and width as what came on your winch.
  view full answer...
• Replacement Strap For Fulton XLT1801 Winch
  After doing some research on your XLT1801 which has been replaced by the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap part # F142418 with a 2,600 lb capacity the strap is 20' long x 2" wide like you mentioned. The replacement strap is Fulton Heavy-Duty Winch Strap with Hook part # FWS20HD0200.
  view full answer...
• Can a Winch Strap Be Used with the Fulton Trailer Winch Part # F142412 (T2625)
  Yes, you can use a strap with your Fulton High-Performance 2-Speed Trailer Winch part # F142412 (T2625). For this, I recommend using the Fulton Heavy-Duty Winch Strap with Hook part # FWS20HD0200. This strap is a direct fit for your winch and has a 4,000 lb working load limit which will be more than enough for your boat. I have attached a review video of this strap for you as well.
  view full answer...
• Available Replacement Parts for JIF Marine 3200-lb Hand Winch
  The only replacement part available for the Jif 2-Speed Boat Trailer Winch # 315-W3200D is the Hand Winch Strap with Safety Hook # DL24242. If you need to replace your winch and are looking for something that does have replacement parts available, the Fulton 2-Speed Trailer Winch # F142424, which has a ratchet repair kit available with part # F501133 and a replacement strap # FWS20HD0200.
  view full answer...
• Strap Replacement for Fulton XLT Winch that has 4k Capacity and 20 foot Length
  For a 20 foot long winch strap with a 4,000 lb capacity that would fit your Fulton XLT winch you'd want the part # FWS20HD0200 and you'd be set.
  view full answer...
• Capacity of Strap on Fulton Winch Part # F142424
  The strap on the Fulton 2-Speed Trailer Winch # F142424 is the part # FWS20HD0200 which has a capacity of 4,000 lbs working load limit and break strength of 10,000 lbs. I attached a review video for the strap for you to check out as well.
  view full answer...
• Replacement Parts for a Fulton T1500 Trailer Winch
  I do have an option for you but I called my contact at Fulton and unfortunately, replacement parts for a Fulton T1500 Trailer Winch are no longer available. Therefore, your only option would be to replace the winch and for this I recommend the Fulton Single Speed Trailer Winch part # F142201. This winch has a 1,500 lb capacity like the winch you have now and a 8" long handle with ergonomic grip. It has a zinc plated finish for maximum corrosion resistance and works with a 20' x 2" strap....
  view full answer...

Do you have a question about this Accessories and Part?