1. Accessories and Parts
  2. Dutton-Lainson
  3. Trailer Winch
  4. Hand Winch
  5. Cables and Straps
  6. Strap
Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.

Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.

Item # DL24242
lowest price pledge
Retail:$20.99
Our Price: $19.64
You Save: 6%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.55 lbs
Quantity: 
In Stock, Ships Today
Dutton-Lainson Accessories and Parts - DL24242
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

20' Long hand winch strap and hook. Call 800-298-8924 to order Dutton-Lainson accessories and parts part number DL24242 or order online at etrailer.com. Free expert support on all Dutton-Lainson products. Guaranteed Lowest Price and Fastest Shipping for Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (40)
  • Q & A (20)
  • Videos (2)
  • Photos
  • Why etrailer?

Dutton-Lainson Accessories and Parts - DL24242

  • Trailer Winch
  • Hand Winch
  • Dutton-Lainson
  • Cables and Straps
  • Strap
  • 2 Inch Wide
  • 20 Feet Long
  • 2600 lbs

20' Long hand winch strap and hook.


Features:

  • 2" Wide x 20' long heavy-duty winch strap with hook
  • Breaking strength of 4,000 lbs.
    • For winches with a capacity up to 2,600 lbs. (strap rating must be 150 percent of winch rating)
  • Includes mounting hardware
  • Made in the USA


24240 Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.





Video of Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dutton-Lainson Hand Winch Strap Review

Today on this boat trailer we are going to install part number DL24242 from Dutton-Lainson, this is their 2 inch wide by 20 foot long winch strap and this is rated to 4,000 pounds. The first thing we need to do is remove the old strap. You can see at the very end there is a bolt that got bent up so we are going to have to remove that. We are going to reinstall the strap and go through it and install the nut. The nut stays on the gear side. When you install the bolt keep it as close to the center as possible and just tighten it down to where it meets, you do not have to really crush it or anything. Then you can just wind up your strap. There you have it for part number DL24242.


Customer Reviews

Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. - DL24242

Average Customer Rating:  4.9 out of 5 stars   (40 Customer Reviews)

20' Long hand winch strap and hook.

- DL24242
by:

Installed my new strap today and it works perfect. If you ever have questions about the fit for your winch, give etrailer Customer service a call. They are great to work with. Kaylyn did a great job for me. Thanks! 695518



- DL24242
by:

Worked well 378954



- DL24242
by:

Received the strap last evening and, after shortening the included bolt to fit my particular winch, installed by nightfall. Easy to order from etrailer.com, with solid follow up communication via email. Thank you! 274035


Comments
One year later, its still working like a charm.
Finn J - 07/20/2017

26411

- DL24242
by:

Fast shipping 744407



- DL24242
by:

Fast shipping 744406



- DL24242
by:

Excellent quality! 736686



- DL24242
by:

amazing delivery and great customer ser vice. 678430



- DL24242
by:

Another quality product shipped super fast to my doorstep. This will keep my boat winch going for years to come. 670333



- DL24242
by:

works better than a cable 600898



- DL24242
by:

Perfect fit.. 600632



- DL24242
by:

The selectin and ordering process was a breeze, the items were described clearly. My order (included various items) was shipped and received very quickly. The winch strap was a direct replacement with only one minor issue, the kit comes with two different length bolts, and both of them were too long to clear the inside of my winch frame, I had to source my own shorter bolt to get the job done. 585286



- DL24242
by:

Perfect replacement for the winch strap. 579483



- DL24242
by:

The strap looks great. I should have purchased a 3 inch vs 2 inch. I have not used the winch yet, so I still cannot give a valid review. My rating is for service and follow up by retailer. 569950



- DL24242
by:

Product as Described 552071



- DL24242
by:

Strap was a good replacement for the original boat winch strap. 527284



- DL24242
by:

My OEM strap was getting old and frayed. Why take a chance with old equipment. Mine was 11 years old. This one was same as my OEM. 504845



- DL24242
by:

Exactly as shown and exactly what I needed. Very good service. Thank you!! 481500



- DL24242
by:

Strap worked well with the winch I purchased. Loaded a 1450 lb Viking side by side on a tilt trailer worked great just need to make sure you line the attachment point up with the winch. The winch area where strap wraps & the strap are close to the same size if you don't line them up the strap will start rolling up the side. 442610



- DL24242
by:

Great service from Anthony, great product, and great price! 425029


Comments
Performing as new!
Charles S - 08/27/2018

42881

- DL24242
by:

Ordered a boat trailer winch and some tie down straps. Loved the product videos showing real life operations of the winches. Helped narrow down my choice. Ordered on a Tuesday and had it on Thursday. Just in time for the weekend. Awesome. 420987



- DL24242
by:

It's what I expected for winching my boat up on its trailer. What else can I say about a strap. 402070



- DL24242
by:

Quality product-worked great. 377263



- DL24242
by:

Fast and accurate. 367515



- DL24242
by:

HAND WENCH STRAP DL24242 IS JUST WHAT I WANTED AND EXPECTED . I THANK YOU FOR PROMPT FAST DELIVERY 353337



- DL24242
by:

GOOD STUFF 348661


25
40
Show More Reviews

Ask the Experts about this Dutton-Lainson Accessories and Parts

  • Winch Recommendation for Lifting 700 lb Sailboat Vertically
    The only types of winches we can recommend for hoisting like what you are wanting to do are the worm gear winches like the # DL11011 that you referenced. This winch has more than enough capacity so it would fit and work well. For a similar winch that can use a strap instead of a wire rope you'd want the part # DL11004 with the strap part # DL24242 and you'd be set.
    view full answer...
  • Hand Winch Compatible with a Powered Drill For Lifting and Lowering a Gate
    The Dutton-Lainson Heavy Duty Brake Winch part # DL10808 has a braking mechanism that locks in place when the handle is released. In order to obtain a ratcheting mechanism with this winch you will want to replace the handle with the Brake Winch Ratcheting Replacement part # DL70346. When used in place of the regular handle, it allows the operator to both raise and lower the load without turning the handle a full revolution. As long as your gate does not exceed 1,200 lbs, this winch...
    view full answer...
  • Worm Gear Winch for Car Hauler Trailer
    The type of manual winch I suggest for your car trailer is a worm gear type which prevents the car from rolling backwards even if you let go of the handle. Winch capacity for your application with a rolling load on an incline does not need be very high. As an example, a 2500-lb rolling load on a 10% incline requires only a 500-lb-rated winch. Please refer to the linked article. The Dutton-Lainson 2K Worm Gear Hand Winch # DL11004 can be operated either by the included handle or with...
    view full answer...
  • Availability of Dutton-Lainson Worm Gear Brake Winch That Can Use Strap as well as Cable
    We offer worm gear brake winches in various ratings but all are higher than 800-lbs. Our worm gear winches can be seen on the linked page and you'll note their capacities range from 1500- to 3,000-lbs. These are all designed specifically for a cable, such as # DL11011, or for a 2-inch strap, such as # DL11002. The strap for this winch is part # DL24242.
    view full answer...
  • Recommended Game Feeder Winch
    For a new game feeder winch I recommend the Fulton Single Speed Trailer Winch # F142201 along with Hand Winch Strap # DL24242. The Fulton winch has a 1,500 lb capacity, 4.1:1 gear ratio and 2-way ratchet system. I've added a link to a video review of the winch for you to take a look at as well.
    view full answer...
  • Worm Gear Winch Recommendation for RIB Inflatable Dingy on a Yacht
    For a worm gear winch that you can use with a strap instead of a cable I recommend # DL11002. You could then use strap # DL24242. You will need to add the hex shaft, # DL406102, in place of the standard shaft to use a variable speed drill with the winch. Worm gear winches are slow and you are bound to get tired moving the load even a few feet so a drill is the way to go. Your 18 volt drill should be more than enough to lift the load. I do not recommend an impact driver because it is...
    view full answer...
  • Hand Winch for Use with Lightweight Loads
    In cases where the weight of the load on the winch is too low to properly engage the winch brake you can use a worm gear winch instead. This type of winch uses a screw mechanism to operate the load. The weight of the load cannot cause the winch to reverse direction so no brake mechanism is needed at all. The linked page displays our range of worm gear winches. You have a choice of poly strap or wire rope models, but for a marine environment I suggest the strap type, either part # DL11004...
    view full answer...
  • Is a Worm Gear Winch a Good Choice for a Flat Bed Trailer
    You can use Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle - 2,000 lbs Item # DL11004 for your utility trailer. If you do I strongly recommend using a drill to reel in the line or let it out (worm gear winches do not have a free-spool mode) because otherwise it will move very, very slow using the crank handle. If the winch is to be mounted directly to the floor of your flat bed trailer then I do recommend a top-winding winch so you have more space to operate either the handle...
    view full answer...
  • Can Crank of Dutton-Lainson # DL14125 Hand Winch Be Operated With a Drill or Impact Driver
    Dutton-Lainson doesn't recommend using a drill or driver to operate a standard winch such as the # DL14125. However, they do offer a worm gear winch, part # DL11004 that can be operated using a drill with a 5/8 inch socket. Because it's a worm gear winch, there's no need to worry about the winch spooling out or freewheeling if you lose your grip on the drill, which is a highly important safety feature. If you stop turning the shaft, the reel will stop in place. This winch is compatible...
    view full answer...
  • Floor Mount Winch Needed to Pull Powered Parachute Airplane Into Enclosed Trailer
    We have exactly what you are looking for! The Dutton-Lainson Worm Gear Hand Winch # DL11004 has a hex drive topwind handle that you can operate by hand while it sits on the floor of your trailer or with a drill and a 5/8" socket. I recommend using the drill since the worm gear operates really slow. It takes 40 turns of the handles for 1 rotation of the drum. This winch is rated for 2,000 lbs so it will easily be able to pull your powered parachute airplane into your enclosed trailer....
    view full answer...
  • Dutton Lainson Worm Gear Winch That Can be Operated With Drill
    I recommend going with the winch you mentioned, the Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle # DL11004. It would work perfectly for your application and can be operated manually or with a power drill like you wanted. It also works with the Dutton-Lainson Strap # DL24242 instead of a cable so you'll be able to lift your kayak. I've added links to a pair of video reviews of these products for you to take a look at.
    view full answer...
  • Dutton-Lainson Trailer Winch - DL11004 Strap Length Recommendation
    I spoke with my contact at Dutton Lainson and the max length (and recommended length) strap to use with the Dutton-Lainson Worm Gear Hand Winch # DL11004 is 20 feet like the # DL24242.
    view full answer...
  • Worm Gear Hand Winch and Strap to Lift a 50 lb Rooftop Carrier Off of a 2012 Honda Accord
    The Dutton-Lainson Worm Gear Hand Winch, # DL10950, cannot be used with a nylon strap. This is a cable only application that would work well to raise and lower your 50 lb rooftop carrier if your set up allows use of a cable If your set up requires a strap, you could use the Dutton-Lainson WG2000 Worm Gear Hand Winch, # DL11002. This is the only worm gear hand winch we offer that will accept a strap and it has a rated capacity of 2,000 lbs. This winch requires a 2 inch wide strap like...
    view full answer...
  • Will the Dutton-Lainson Worm Gear Winch # DL11001 Accept a Strap
    We do have a worm gear winch that will accept a strap, however the Dutton-Lainson Worm Gear Winch, # DL11001, is for use with a cable or rope only. Instead, take a look at the Dutton-Lainson Worm Gear Winch, # DL11002. This winch is basically the same winch as # DL11001 that you referenced, but it has a drum that was designed to accept the bolt that secures the strap to the winch. If you need a strap, I recommend the Dutton-Lainson Hand Winch Strap, # DL24242.
    view full answer...
  • Strap Recommendation for Dutton Lainson 2k Trailer Hand Winch
    The recommended strap for Dutton Lainson winch # DL14725 is a 25 foot long, 4,000 pound capacity strap, # DL24249. For a 20 foot strap with 4,000 pound capacity use # DL24242. You always want the strap to be at least 150 percent of the winch capacity for safety.
    view full answer...
  • Can Winch Strap Be Used On Dutton-Lainson Worm Gear Hand Winch # DL11011
    The Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle # DL11011 referenced in your question is designed specifically for use with a cable like # DL24100. A strap cannot be used with this particular model winch. For a similar style, worm gear hand winch that is designed to be used with a strap, I recommend the Dutton Lainson # DL11002. This has a slightly larger capacity of 2,000 pounds when compared to the model you were looking at and can be used with the winch strap # DL24242....
    view full answer...
  • Manual Winch Recommendation for Landscape Trailer
    For your manual crank winch to load your mower I recommend the Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs # DL11004 which will allow you to use a 5/8 inch socket with a drill attachment or the included socket-head handle. I recommend using the Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. # DL24242 with this winch. If you prefer a sidewind option I recommend the Dutton-Lainson Hand Winch w/ Automatic Brake # DL15721. I've attached some videos...
    view full answer...
  • Strap Recommendation for Dutton Lainson Strongarm Winch DL24870
    I wish I could say yes, but Fulton specifies that it's only designed for use on Fulton manual winches.
    view full answer...
  • Which Straps Work with Dutton-Lainson 1200 Pound Brake Winch DL14934
    You can use several different straps with Dutton-Lainson winch # DL14934. You will need a strap that is 2 inches wide and up to 31 feet long. You can use: # DL24249 at 25 feet long # DL24251 at 20 feet long # DL24242 also at 20 feet long # DL6148 at 15 feet long # DL24239 at 15 feet long # DL24260 at 20 feet long
    view full answer...
  • Can Dutton-Lainson Hand Brake Winch Be Used with Synthetic Rope
    The Dutton-Lainson Hand Winch # DL11004 that you referenced is only designed to handle straps like the 20 foot long # DL24242. It should not be used with synthetic rope like 6mm # BDW20095. There aren't any Dutton-Lainson hand winches that can be used with synthetic rope. This is because synthetic ropes are slippery, can slide over surfaces too easily, and have been known to jam the reel and drive gears together on winches like this.
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Installed by:
Cole B
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.