bing tracking image
  1. Accessories and Parts
  2. Dutton-Lainson
  3. Trailer Winch
  4. Cables and Straps
  5. Straps
  6. 2 Inch Wide
Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs.

Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs.

Item # DL24239
Retail:$37.00
Our Price: $22.25
You Save: 40%
Accessories and Parts
Shipping Weight: 1.34 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Dutton-Lainson hand winch strap with a safety hook. 1-800-940-8924 to order Dutton-Lainson accessories and parts part number DL24239 or order online at etrailer.com. Free expert support on all Dutton-Lainson products. Great prices and Fastest Shipping for Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs.. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (48)
  • Q & A (0)
  • Videos (2)
  • Photos

Dutton-Lainson Accessories and Parts - DL24239

  • Trailer Winch
  • Cables and Straps
  • Straps
  • Dutton-Lainson
  • 2 Inch Wide
  • 2600 lbs
  • 15 Feet Long

Dutton-Lainson hand winch strap with a safety hook.


Features:

  • 2" Wide x 15' long
  • Breaking strength of 4,000 lbs.
    • For winches with a capacity up to 2,600 lbs. (Strap rating must be 150 percent of winch rating)
  • Includes mounting hardware
  • Made in the USA


24239 Hand Winch Strap with Safety Hook Model 6248, 2" Wide x 15' Long - 4,000 lbs.





Video of Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dutton-Lainson Hand Winch Strap Review

Today we're going to show you the hand winch strap from Dutton-Lainson part number DL24239. It's two inches wide, by fifteen foot long all the way around. It has a breaking strength of 4,000 pounds, and a low capacity of 2,600 pounds. It also comes with hardware. You have two bolts, and this nut. Depending on the winch you're going to use this on, it gives you two choices.

You only use one of the two bolts. It's pretty handy to come with it when you need to change out your strap. Sometimes it's an old bolt and you'd just like to cut it off and start new. It's nice to have some fresh hardware. Pretty simple, it also has a hook on the end, a little safety catch.

It has a galvanized finish. Let's go ahead and show you how to install this in our winch. First off, it's a good idea to test your hardware to make sure you can use the shortest of the two bolts. Typically there's a hole in your winch, and you run the bolt through. See which one you need. Sometimes, you may have to shorten your bolt a little bit to have clearance.

We're going to go ahead and shorten our bolt, probably about a quarter inch still. You can easily do this with a hack saw and a device to hold you bolt. You can go ahead, get inside the threads and cut it in half. We'll be using a cutting wheel. After you have your bolt cut, do another test of it.

If it's just a little bit more to take off, it might just be easier to put a simple washer on there to take up the space. Okay, let's leave it partly in for now. You want to take our strap and thread it through the loop that's built into the strap. Work it through the strap and put lock nut on the other side. We'll tighten it down using a 9/16th socket and a wrench. It doesn't have to be tight, just snug. All that remains is just go ahead and wind it up. With that, that will finish it for the Dutton-Lainson hand winch strap, part number DL24239 on this old boat trailer.

Customer Satisfaction Score:


Customer Reviews

Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs. - DL24239

Average Customer Rating:  4.8 out of 5 stars   (48 Customer Reviews)

Dutton-Lainson hand winch strap with a safety hook.

by:

I bought this strap to go with the DL14125 - 600 lb Hand Winch. The strap is very good quality and seems to be constructed well. The only issue I had was that it did not come with the correct sized bolt and nut to work with the DL14125 winch. The winch specs out a 2-3/4" x 1/4" bolt & lock nut to hold the strap in place but the strap came with (2) 3/8" bolts and a non-locking nut. One 2-3/4" and another 3". I had to buy a 3" bolt and cut it down to work because i couldn't find a 2-3/4".



by:

Dutten-Lainson Hand Winch Strap: 2" x 15' strap is high quality. The stitching , webbing , safety hook , appear to be able to handle the rated loads for this strap.The bolt information is appropriate for various winches. I will be using it for my crossbow and boat. Keep making quality products, I will buy.



by:

Just as advertised. Fast shipping



by:

I am very satisfied with the products that I bought from you. These were so I could pull my little 12 ft. boat and put new lights on the trailer. I have no pictures at this time.



by:

How grateful I was to be able to order on-line the items I needed. Living out in the country it is indeed the most economic way we farmers can receive the items we need without a tremendous and expensive effort on our part. Thanks etrailer for you prompt and timely response to my request.



by:

Very good service.



by:

looks as advertised. Fair price and fast shipping. Converting a cable winch to a strap - nice to have the bolt included. Hard to find a 15' length strap at a retail outlet.



by:

Exactly what I ordered came in. They did an outstanding job describing product to a T
Also, follow up is a 5 Star as well!!
I wish more companies where as thoughtful and concerned as you guys are.
Thank you very much. I will certainly order more product as needed from Etrailer.



by:

Good replacement strap and good length too. 15ft. is more than enough.



by:

Easy to order. Always deliver as promis ed!



by:

Bought this to go with the new winch we purchased.
Every thing about it is great. Time will tell how it holds up.

S

7/13/2020

It is great!



by:

Great strap. The website is misleading though. The pictures are clearly all gray but I received a black strap.

Owen

5/20/2021

Still working just fine.



by:

The part looks great. I haven't tried the strap yet though.

Tvrdik

9/6/2019

It has been working great as good or better than the original



by:

Product was as advertised, no problems. Order was placed in the morning and shipped out later that night. Confirmation of order and shipping were promptly provided. Excellent customer service. I certainly would order from this company again.



by:

This guys shipped fast and sent a great product. Nice to be able to save some money on unique products like this.



by:

Bought this as a spare, appears great quality and seems the same as the one that’s already installed



by:

Replaced my old strap with this one and am very pleased.



by:

It's still holding up. No issues.



by:

Great product, much stronger than what I had on there.



by:

One year and and no problems.



by:

Easy as pieThis was one of the easiest online orders I have ever done. Simple and quick. Had it in 3 days after I ordered. Will be ordering more from them.



by:

Excellent



by:

EXCELLENT PRODUCT. WORKED OUT PERFECTLY. STRONG AND DURABLE!!



by:

Got exactly what I ordered in a very timely fashion and tracking the order was great.



by:

got it fast, everything fit perfectly, good deal
thanks


25
48
Show More Reviews

See what our Experts say about this Dutton-Lainson Accessories and Parts

  • Recommended Replacement Winch Strap for a 2" Hand Winch
    The Hand Winch Strap with Safety Hook # DL24239 is not exactly 2" wide it's actually 1 7/8". Since the housing on your winch where the strap would go is 2" wide this strap will still work. Also, this strap measures 15' long and has a breaking strength of 4,000lbs.
    view full answer...
    Image 1 for
  • Is Dutton-Lainson Trailer Winch Strap # DL24239 Black or Gray
    Yes the Dutton-Lainsion hand winch strap # DL24239 is indeed black. Light reflections on some materials can make black items look lighter. I made a video showing this strap that will appear on this page.
    view full answer...
  • What is Width/Thickness of the hook on Winch Strap # DL24239 at the Widest/Thickest Point
    I went out to the warehouse to measure winch strap # DL24239. At the widest/thickest part of the hook it is 0.83 inches which is between 13/16 and 7/8 inches. Based on your measurements it sounds like the hook will fit!
    view full answer...
    Image 1 for
  • How Does Winch Strap # DL24239 Attach to Winch Drum
    If you check out the review video I attached for the # DL24239 you will see exactly how it installs on a winch. Basically you run the bolt through the hole on the drum of the winch, through the strap loop, and then through the other side of the drum where you use the nut to secure it.
    view full answer...
  • Winch Strap Suggestions to Replace a Wire Rope on a Boat Winch
    First you are going to need to determine if your particular winch can be used with a strap instead of a cable. Some winches will accept either but other winches must be used with one or the other. Contact your winch manufacturer to determine if your model can be used with a strap. A 12 foot aluminum boat that is floating is not going to be too heavy and the length that you need is really going to depend on where you are launching and retrieving the boat, how far you back into the water...
    view full answer...
  • Recommended Hand Winch to Load and Unload a 500 lb Motorcycle on a Trailer
    The hand winch that I recommend for you to use so that you can load and unload your 500 lb motorcycle effortlessly is the Dutton-Lainson Hand Winch with TUFFPLATE Finish # DL14125. This winch is rated for 600 lbs and it has a gear ratio of 3.2:1. It can be used with either a 61 foot x 15/32 inch cable or a 16 foot x 2 inch strap. An appropriate strap to use with this winch would be the Hand Winch Strap with Safety Hook, part # DL24239, which is 15 feet long x 2 inches wide and is rated...
    view full answer...
  • Replacement Strap for Fulton 500621 Electric Boat Trailer Winch
    My contact at Fulton tells me that they don't offer a replacement strap for the discontinued Fulton 500621 electric winch, but I found that the winch uses a 2 inch wide strap and fastens to the winch spool using a bolt that passes through a loop that has been sewn into the end of the strap. The 4000 lb capacity 15' x 2" Dutton-Lainson # DL24239 replacement strap would install in the same manner, so it'll work just fine for your Fulton 500621 electric winch. This is the longest strap that's...
    view full answer...
  • Replacement Strap for Shelby 5408B Winch
    The replacement strap I recommend is the 12 foot Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson, part # DL24291, to use with your Shelby Winch 5408b. This strap will replace your winch strap and the hook has a tensile strength of 3,750 pounds well over 150 percent of the 1,900 pounds your winch is rated to hold.
    view full answer...
    Image 1 for
  • Replacement Winch Strap for Shelby Wench 5408b with 12 Foot Strap
    It is recommended that winches with a capacity of 2,600 pounds use a strap with a rating of 150 percent of the weight of the winch. The replacement strap I recommend is the 12 foot Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson, part # DL24291, to use with your Shelby Winch 5408b. This strap will replace your winch strap and the hook has a tensile strength of 3,750 pounds well over 150 percent of the 1,900 pounds your winch is rated to hold.
    view full answer...
  • Available Replacement Winch Straps and Winches
    We offer replacement winch straps in several widths but not in a 1-3/4-inch width. The items nearest to your description are the Dutton-Lainson # DL6148 rated for 2600-lbs break strength and part # DL24239 rated for 4000-lbs break strength. Both of these 15-foot straps include a hook and pin but they are 2-inches wide. I have also linked for you our page for hand winches that use straps.
    view full answer...
  • Winch Strap Width and How Connected on part# DL14125
    For a strap for winch # DL14125 you will need 2 inch wide strap # DL24239. It is rated for 4,000 pounds and is 15 feet long. To attach a cable all you have to do is locate the set of elongated holes on the drum closest to the center of the drum. The strap comes with a bolt and nut. The bolt goes through one hole, through the loop in the strap, and through the other hole. The nut secure it on the other side. The nut should be on the gear side. I have included a link to a video review of...
    view full answer...
    Image 1 for
  • Will the Dutton-Lainson Hand Winch Strap # DL24239 Work with Hand Winch # DL15002
    You will have no problem using the Dutton-Lainson Hand Winch Strap - 4,000 lbs, # DL24239, with the Dutton-Lainson Hand Winch Model DL900A, part # DL15002. This winch has a maximum strap length capacity of 16 ft. Also, the weight rating of the strap will not affect its compatibility with this winch.
    view full answer...
  • Recommended Winch for 300 Lb Boat with Power Drill Adapter
    I do have an option but the only manual winches we have that can be operated with drill via an adapter are simply too heavy for such a small boat and will not work properly with this light load. I recommend using the Dutton-Lainson Hand Winch part # DL14125 with the Hand Winch Strap part # DL24239. The ability to use the winch with a drill won't be an option unfortunately.
    view full answer...
  • Recommended Replacement Strap for Shelby 5408 Winch
    The Shelby 5408 used a 2" strap, so you would only need one with the appropriate break strength and length. I recommend the Dutton-Lainson Hand Winch Strap with Safety Hook # DL24251 which has a break strength of 4,800 lbs and is 20' long. If you wanted a different length, there is also a 25' strap, # DL24249, and a 15' strap, # DL24239, both of which have a break strength of 4,000 lbs. I've added links to video reviews of all three straps for you to take a look at.
    view full answer...
  • Strap Compatible With Fulton Single Speed Trailer Winch # F142002
    The Fulton Single Speed Trailer Winch # F142002 does not come with a strap or a rope. It is capable of holding a 36' x 1/4" Nylon Rope or 15' x 2" Strap # DL24239.
    view full answer...
  • Mounting Holes Measurements and Strap Width for Dutton Lainson 600 and 900 Pound Winches
    Both hand winches # DL15002 and # DL14125 have the same mounting pattern. I have included a picture that shows the dimensions for you. A 2 inch wide strap will work with these winches. You will want the strap capacity to be at least 1.5 times higher than the winch capacity for safety. For winch # DL15002 the recommended strap is # DL24291. And for winch # DL14125 the recommended strap is # DL24239.
    view full answer...
    Image 1 for
  • What is Maximum Length of Strap That Can Be Used On Fulton Single Speed Trailer Winch # FT6000301
    The Fulton Single Speed Trailer Winch, part # F142002, can be used with 15 feet of 2 inch wide strap, like the Hand Winch Strap with Safety Hook, part # DL24239. This is the maximum length that can be used in this winch. It can also be used with a maximum 36 feet of 1/4 inch cable. The cable would only come in 25 foot lengths so you can use the Hand Winch Cable with Safety Hook, part # DL24100, which will give you 25 feet of cable. If you need the full 36 feet of cable you can use the...
    view full answer...
  • Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
    The 1-7/8 inch width is what is rounded up to 2 inches which is a standard width for winch straps. The 14 foot length is not something we carry. I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 15' Long - 4,000 lbs # DL24239 or the 12' Long Personal Water Craft Trailer Winch Strap with Safety Hook by Dutton-Lainson # DL24291. The only Fulton name brand strap we have in the 2 inch width is 20 feet # FWS20HD0200.
    view full answer...
  • Recommended Replacement Hand Winch and Strap for a Fulton T600 Winch
    It appears that the Fulton T600 has been discontinued and no longer offers replacement straps for that winch. I am going to have no way of knowing if the BoatBuckle PWC Winch Strap with Hook and Soft Tie # IMF14216 you're looking at will work with your current winch or if it will work with your SeaDoo. That being said, the best thing I can recommend is to replace the entire winch with it's beefier upgrade the Fulton Single Speed Trailer Winch # F142002 with the strap # DL24239. This winch...
    view full answer...
  • Which Straps Work with Dutton-Lainson 1200 Pound Brake Winch DL14934
    You can use several different straps with Dutton-Lainson winch # DL14934. You will need a strap that is 2 inches wide and up to 31 feet long. You can use: # DL24249 at 25 feet long # DL24251 at 20 feet long # DL24242 also at 20 feet long # DL6148 at 15 feet long # DL24239 at 15 feet long # DL24260 at 20 feet long
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Cole B
Installed by:
Cole B
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.