Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.

Ask the Experts about this Dutton-Lainson Accessories and Parts

• Can A Strap Be Used With Dutton-Lainson Brake Winch # DL14964
  I spoke with my contact at Dutton-Lainson about the Dutton-Lainson Winch, part # DLB1500A. They told me that this winch is capable of using either a cable or a strap. Since the barrel is 2 inches wide, the Hand Winch Strap, part # DL24249, would work for your winch. The strap has a load capacity of 4000 lbs and can be used on winches with a weight capacity up to 2600 lbs. This strap also comes with a safety hook attached.
  view full answer...
• Can a 35 Foot Long Strap Fit on the Shelby 5460 Winch
  A 35 foot, 2 inch wide strap would be pushing the capacity of the drum for Shelby winch 5460 so you might have some of the strap left hanging out. We recommend a 25 foot strap, # DL24249, for use with this winch.
  view full answer...
• Replacing a Shelby 5407B Winch Rated for 1,700 lbs
  To replace your 1,700 lb Shelby 5407B winch I recommend the Dutton-Lainson Single Speed Winch # DL14627 which is rated for 1,800 lbs. This winch features permanently lubricated bearings, high carbon steel gears, and a Zinc TUFFPLATE finish for corrosion resistance. The drum can handle up to a 9/32" x 58' cable or a 38' strap, is made in the USA, and comes with a 5-year limited warranty. For a compatible cable I recommend part # DL24045 and for a strap I recommend part # DL24249.
  view full answer...
• Recommended Hand Winch For 2,090 lb Pro Craft 180 Boat
  I did some research on the 1998 18 foot Pro Craft 180 and from what I could find it weighs about 2,090 lbs. If your trailer does not have rollers or wood bunks you will need a winch that is rated for half the weight of the boat. I recommend the The Dutton-Lainson Hand Winch # DL14725 with a 2,000 lb capacity which would be a bit more than you need. The ZINC plating will resist rust and 2 speed operation. It uses a polyester strap for which I recommend part # DL24249 which has a 4,000...
  view full answer...
• Replacement Winch Recommendation for Shelby 5404
  The Shelby 5404 winch is a 1,200 lb winch with a 20 foot nylon strap. The Dutton Lainson part # DL14996 is a similarly rated 1,500 lb winch and for a strap you would need the part # DL24249. This setup would be slightly stronger and less likely to bend the shaft like you mentioned.
  view full answer...
• Recommended Hand Winch with Strap to Replace DL2500A
  For the similar winch with strap, I recommend the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,500 lbs # DL14825 and then adding the Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs # DL24249. I've attached a couple videos to help.
  view full answer...
• What is Small Plate in Photo of Dutton-Lainson Hand Winch
  The small plate you are referring to in the photo of the Dutton-Lainson Hand Winch # DL14825 is the Cable Clamp for Pulling and Brake Winches by Dutton-Lainson # DL24350. The winch does come with this cable clamp, but it does not come with a cable or strap, so for that I recommend the Hand Winch Strap # DL24249 or Hand Winch Cable # DL24102. I have added a link to a video review for you to check out as well of the Dutton-Lainson Hand Winch # DL14825.
  view full answer...
• Will the Dutton-Lainson Hand Winch with Automatic Brake DL14993 Work With a Strap
  Yes, the Dutton-Lainson Hand Winch w/ Automatic Brake part # DL14993 can be used with a strap and the longest we have available for this is the Hand Winch Strap with Safety Hook part # DL24249 which measures 25' long.
  view full answer...
• How to Pick Out a Handwinch for a Boat Trailer
  Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks like what you currently have the ratio is 1 to 1. The Dutton Lainson Winch part # DL14521 that you referenced has a 1,600 lb capacity so it would be more than adequate and a great choice. For a...
  view full answer...
• Upgraded Winch Recommendation With Same Mounting Dimensions As Current Winch
  The closest I can come to the same mounting holes you have for your DL1402A winch is part # DL14527. This is a 1,600-lb pulling winch and it has very similar mounting hole locations. I have attached dimensional drawings for the DL1402A and the # DL14527 winch you can check out. The mounting holes are nearly identical and I am sure the # DL14527 will work great for you. This winch does not come with the cable. For a cable I recommend part # DL24104. If you prefer a strap for the...
  view full answer...
• Brake Hand Winch to Replace 1500-lb-Rated Shelby 5352
  Some Shelby winch models used a handle that secured to the winch with an Allen key. If this is the type you have then it is possible that the set screw or the post on the winch the handle attaches to is stripped or worn to the point that the handle can no longer crank the winch. While we don't have a repair kit for your Shelby 5352 winch we do have a great replacement winch to match what you have since it is a 1,500 lb brake winch. For that you'd want the Dutton Lainson 1,500 lb Winch...
  view full answer...
• Shelby 5408B Winch Replacement Recommendation
  The max rating of your Shelby 5408B is 1,900 lbs which would be more than adequate for a 2,200 lb boat as typically the ratio for winch capacity to boat weight is 2 to 1. For a similarly rated winch we have the part # DL14627 which is rated for 1,800 lb. For a strap to use with this we have the part # DL24249.
  view full answer...
• Replacement for Shelby 5470 Trailer Winch
  Shelby has gone out of business and as such there are no replacement parts we can offer for your Shelby 5470 winch; due to that the best option is going to be a replacement winch. For this I highly recommend the Dutton-Lainson Hand Winch # DL14825 because it is a 2-speed winch like your Shelby and allows you to use either Strap # DL24249 or Cable # DL24102. This winch has a 2,500 lb capacity, comes with a 5-year warranty and is made in the U.S.A. I have added a link to a video review...
  view full answer...
• Replacement For The Shelby Model 5407B Hand Winch
  I recommend part # DL14627 which is a Dutton-Lainson winch rated for 1,800 pounds to replace your 1,700 lb Shelby 5407B winch. The drum can handle up to a 9/32" x 58' cable or a 38' strap, is made in the USA, and comes with a 5-year limited warranty. This winch features permanently lubricated bearings, high carbon steel gears, and a Zinc TUFFPLATE finish for corrosion resistance. Finally it also bolts onto the same mounting bracket as your existing winch, making for easy installation....
  view full answer...
• Is Dutton-Lainson Hand Winch With Strap Good Option for Boat
  For a 1,500 lb boat you have made a really good choice with the Dutton-Lainson Hand Winch # DL14830. This is a 2,500 lb winch which will be plenty for your boat, and its hand brake is going to be really useful if you come up against a steeper ramp. The TUFFPLATE finish of the Dutton-Lainson winches is also going to be a boon for you since you are going to be in saltwater and freshwater because it has an extra layer of coating which makes it resist corrosion better than the standard zinc...
  view full answer...
• Boat Winch Recommendation for a 4,500 lb Boat
  When it comes to choosing a winch for a boat trailer, there are a few general rules we can use. The boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, the ration can increase to 3 to 1 and with wooden bunks and long winching distances, you will want to reduce the capacity to 1 to 1. So basically, you will want to look at the type and condition of the bunks on your trailer to choose the best winch. The Dutton-Lainson Hand Winch, # DL14825,...
  view full answer...
• Winch Strap Compatible With Dutton-Lainson Hand Winch # DL14627
  You are correct that the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 1,800 lbs. # DL14627 is rated for a 38 foot strap but that is using a strap similar to the Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs. # DL24249. We don't have one that is that length, so I can't confirm physically but the manufacturer says that is the case. The BoatBuckle Boat Winch Strap with Hook and Safety Latch - Loop End - 2" x 25' - 8,000 lbs # IMF14211 is thicker...
  view full answer...
• Recommended Replacement Strap for Shelby 5408 Winch
  The Shelby 5408 used a 2" strap, so you would only need one with the appropriate break strength and length. I recommend the Dutton-Lainson Hand Winch Strap with Safety Hook # DL24251 which has a break strength of 4,800 lbs and is 20' long. If you wanted a different length, there is also a 25' strap, # DL24249, and a 15' strap, # DL24239, both of which have a break strength of 4,000 lbs. I've added links to video reviews of all three straps for you to take a look at.
  view full answer...
• Recommended Kayak Ceiling Storage for 2 Kayaks
  To raise and lower your kayaks, I recommend the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Two Speed with Direct Drive - 1,800 lbs # DL15504. This winch provides an easy to use hand brake to make lowering your kayaks fast and easy. This will work with a strap like # DL24249 or a cable like # DL24045. Another option without the hand brake is the Pro Series Standard Brake Winch - Cable Only - 1,000 lbs # PSKR10000301 with cable # FWC7500100. This has a minimum weight of 50 lbs...
  view full answer...
• Winch Recommendation for Winching 600 lb Jon Boat and Trailer Up Incline
  The higher the rating for the winch the easier it will be to winch your boat and trailer up the incline. The Dutton-Lainson Hand Winch, TUFFPLATE Finish, Two Speed with Direct Drive # DL14730 that you referenced has a 2,000 lb capacity so it should work very well to winch in your 165 lb jon boat and trailer that weighs total around 600 lbs. This two speed jack will has ratios of 12.4:1 and 5.4:1. For a strap you would then want the part # DL24249. This is 25 feet long. I also attached...
  view full answer...
• What is the Bolt Hole Mounting Pattern for Dutton Lainson Trailer Hand Winch # DL14725
  I will be happy to show you the mounting hole dimensions for hand winch # DL14725. I have included a picture that shows them for you. This winch can be used with either a strap, # DL24249, or a cable # DL24104. Straps are much better for marine applications because they will not rust. The strap is rated for 4,000 pounds and the cable is rated for 3,500 pounds. You always want the cable or strap capacity to be at least 1.5 times greater than the winch capacity or higher for safety.
  view full answer...
• Difference Between Strap and Cable for Winches Like Dutton Lainson Winch DL15403
  The wire cable will allow you to have a longer lead and will not offer any amount of give. Using a strap can limit the length of the lead. If you will be winching items that need to have the lead wrapped around them, the strap will be gentler on your cargo than the wire rope. Another factor to consider is that the wire rope is more difficult to cut than a strap. Straps are a bit easier to wrap on the spool of the winch too as it's just one layer on top of the other. Also straps are a bit...
  view full answer...
• Looking For Winch For Jet-Ski Trailer Where Handle Can Be Swapped to Other Side of Winch
  The lowest capacity hand winch we offer that the handle is easily changeable would be the Dutton-Lainson # DL14527. The folks at Dutton-Lainson have told us that this winch is capable of being modified. The drum, its shaft, the gear shaft and pawl shaft would all need to be removed, and reversed. The gear shaft is held in place by both a nut and an e-clip that would need to be removed. I have labeled these parts in a photo I have edited for you. In other words, some dis-assembly would...
  view full answer...
• Will The Dutton-Lainson Winch Work For Loading a 600 LB Motorcycle on Trailer with Drill
  The winch you referenced is the Dutton-Lainson Winch, part # DL14730. It has a capacity of 2000 lbs, so it will certainly handle the 600 lbs you mentioned the motorcycle weighs. This winch features a reversible ratchet, hand brake, and has a quick attach handle. I would also recommend the Hand Winch Strap with Safety Hook, part # DL24249. This strap is 2 inches wide and 25 feet long, and has the safety hook attached. The strap has a capacity of 2600 lbs. This combination does not have...
  view full answer...
• Strap Recommendation for Use with Dutton Lainson Winch part # DL15103
  A 2 inch wide strap would be what you would need to use with the Dutton Lainson Winch part # DL15103 that you referenced. For that you would want the part # DL24249.
  view full answer...
• Can a Winch Cable Be Replaced with a Hand Winch Strap On a 2006 Aluminum Loadrite Trailer
  With a 5,200 pound rated trailer and a 4500 pound boat you are getting to the upper end of the capacity rating for winches with a strap. That is most likely why your winch has a cable installed on it. Some winches are set up so that a cable or a strap with hook can be used. If a strap, item # DL24251, can be used on your winch there will be holes in the cable drum sides, directly across from each other, to put a bolt through that the strap attaches to. If your drum is not set up in this...
  view full answer...
• Hand Winch Recommendation for Sailboat Trailer with Roller Bunks
  Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks the ratio is 1 to 1. So you have rollers and a long winching distance so 2 to 1 is the correct ratio. That means you would need a 1,500 lb winch at minimum. The Dutton-Lainson Hand Winch # DL14725...
  view full answer...
• Availability of a Replacement Winch Handle for a Shelby 5407 Winch
  We do have a winch to replace your Shelby 5407 winch, but unfortunately we do not have a replacement handle that fits your Shelby winch. To replace your 1,700 lb Shelby 5407B winch I recommend the Dutton-Lainson Single Speed Winch # DL14627 which is rated for 1,800 lbs. This winch has permanently lubricated bearings, high carbon steel gears, and a Zinc TUFFPLATE finish for corrosion resistance. The winch is made in the USA, and comes with a 5-year limited warranty The drum can...
  view full answer...
• Lift Winch Replacement For A 1998 Starcraft Starlounge
  The Dutton-Lainson Hand Winch part # DL14934 is a suitable choice with a 1,200lb capacity to replace the Shelby Winch 5438 on your pop-up camper. It is also made in the U.S.A. and comes with a five year warranty. You can reuse your existing cable/strap or replace it with either part # DL24045 or part # DL24249. I have attached review videos on the above winch and replacement parts for you.
  view full answer...