Replaces (1) 63" long arm assembly used to support your Carefree, Dometic, or Solera RV awning.

Replace the support arms on your RV awning with these electric arms for easy, push-of-a-button operation. Conversion kit wires into your RV's power to work with your existing setup. Pitch can be manually adjusted to block sun all day.

Replaces (1) 69" long arm assembly used to support your flat Solera RV awning.

Replaces 1 pitch arm assembly used to support your standard Solera flat RV awning with 69" long support arms.

Replaces 1 pitch arm assembly used to support your Solera XL flat RV awning with 63" long support arms.

Replaces the control box and nested touchpad on your Solera Smart Arm RV awning.

Replaces the gear pack in the drive head motor of your Solera 12V, 18V, or Smart Arm electric RV awning.

Replace the support arms on your RV awning with these electric arms for easy, push-of-a-button operation. Conversion kit wires into your RV's power to work with your existing setup. Pitch can be manually adjusted to block sun all day.

This awning rail lets you anchor your awning fabric to your RV. The rail is 8' long and mounts on the outside wall of your RV.

Replace the head and roll bar on the left side of your Solera slide-topper awning.

Replaces the motor of your Solera 12V, 18V, or Smart Arm electric RV awning manufactured after 2015.

Replaces the front cover of the drive head on your Lippert Edge RV awning.

Replaces the head pin of the Regal-style drive head on your Solera 12V, 18V, or Smart Arm electric RV awning.

Replaces the back cover of the Regal-style drive head or idler head on your Solera 12V, 18V, Smart Arm electric RV awning.

Upgrade to a powered RV awning with these programmable smart arms. The accessible, built-in touchpad lets you operate your existing awning with the push of a button. Add wind and infrared sensors (sold separately) for safe and secure camping.

Replace the head and roll bar on the right side of your Solera slide-topper awning.

Replaces the Regal-style idler head of your Solera 12V, 18V, or Smart Arm electric awning.

Replaces the flat track LED light strip for your Solera RV awning. Requires switch found in Solera LED fabric light kits (LC674282 and LC674283).

Replaces 1 roller tube endcap on your Solera electric RV awning.

Replaces 1 retaining washer needed for the pitch arm assembly on your Solera RV awning.

Replaces the head pin of the plain-style drive head on your Solera 12V electric RV awning.

This awning rail lets you anchor your awning fabric to your RV. The rail is 8' long and mounts on the outside wall of your RV.

Add this wind sensor to your Solera Smart Arm to prevent damage to your awning. Sensor automatically retracts your awning when high winds are detected. Offers 3 levels of sensitivity. Installation hardware and wiring harness included.

Replaces the front cover of the idler head on your Lippert Edge RV awning.