Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW

Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW

Item # C17117

lowest price pledge

Retail:$104.57

Our Price: $62.39

You Save: 40%
Accessories and Parts

This item qualifies for Free Shipping

Shipping Weight: 16 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW Spring Bars C17117
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Replaces 1 round spring bar for Curt weight distribution system with shank (17002 and C17007). Includes spring bar with pre-assembled chain fastener. Call 800-298-8924 to order Curt accessories and parts part number C17117 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (8)
  • Q & A (11)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Accessories and Parts - C17117

  • Weight Distribution
  • Spring Bars
  • Curt
  • Round Bar
  • 1500 lbs TW

Replaces 1 round spring bar for Curt weight distribution system with shank (17002 and C17007). Includes spring bar with pre-assembled chain fastener.


Features:

  • Replaces a round spring bar for Curt weight distribution systems with shank (17002 and C17007)
  • Black powder coated steel is long-lasting and rust resistant
  • Tongue weight: 1,000-1,500 lbs
  • Includes 1 round spring bar with pre-attached chain fastener


17117 Replacement Spring Bar for Curt Round Bar Weight Distribution System







Video of Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Curt Weight Distribution Parts - Weight Distribution - C17117

Today we're going to take a look at the replacement 1,000 pound to 1,500 pound tongue weight capacity spring bar for the Curt round bar weight distribution system. Now, this part will replace a round spring bar on the curved weight distribution systems with shank, part number C17002 and C17057. Both of those systems we do sell separately on our website. Now, this part is constructed from forged steel for optimum strength. It is also protected by a nice highly durable carbide powder coat finish over the whole bar and it is pre-assembled with the spring bar chain ready for attachment.It does offer multiple chain links which allow for flexible adjustment of tension. The gross trailer weight capacity for this bar is 10,000 to 15,000 pounds.

Tongue weight capacity is 1,000 to 1,500 pounds. It does include everything shown here; the one round spring bar with the pre-attached chain inaudible 00:00:57. Basically when you go to install this, the round end portion right here is what will insert into your weight distribution head and the chain on the other end is what will attach to the lift brackets on the trailer frame. But that should do it for the review on the replacement 1,000 pound to 1,500 pound tongue weight capacity spring bar for Curt round bar weight distribution systems.


Customer Reviews

Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW - C17117

Average Customer Rating:  4.9 out of 5 stars   (8 Customer Reviews)

Replaces 1 round spring bar for Curt weight distribution system with shank (17002 and C17007). Includes spring bar with pre-assembled chain fastener.

- C17117
by:

Product was what I had ordered. Purchase via phone was excellent. Excellent service personnel who took my order. 595810



- C17117
by:

Nice product 533799



- C17117
by:

I had to order a replacement spring bar for my hitch assembly after one failed on me..the replacement arrived quickly and the tracking system utilized by etrailer was extremely simple when I looked in on the shipping progress of my item. The replacement bar also came with a better chain set up than my original.. 517839



- C17117
by:

Arrived on time in good shape. Very heavy duty just what I need for Mr toy hauler 382282



- C17117
by:

Product was good for what it needed to be delivered on time easy to purchase 378012



- C17117
by:

great people to work with Thanks 286146



- C17117
by:

Excellent customer service & a great price too, with fast shipping! will buy from again. 227600


Comments

Working great!s

Gary K - 09/25/2016

21228

- C17117
by:

I was having a problem not only finding this part but also at a reasonable price untill I found etrailer! My sales person got it to me in a timely manner at the best price! 208801


8
8

Ask the Experts about this Curt Accessories and Parts

Do you have a question about this Accessories and Part?


  • Replacement Weight Distribution Round Spring Bar for Curt System Based On Dimensions
  • I reached out to my contact at Curt and confirmed the fit for your measurements. We have 3 different capacities available with the dimensions you gave. These bars come as an individual part and you will need to make sure you have the correct matching set for your system to function correctly. Replacement Spring Bar for Curt Round Bar Weight Distribution System - 600-800 lbs TW # C17113 Replacement Spring Bar for Curt Round Bar Weight Distribution System - 800-1,000 lbs TW # C17115 Replacement...
    view full answer...

  • Identifying Round Bar Weight Distribution Hitch For Replacement Parts
  • There are a couple of things to look for in the identification of your system. First, look for any imprints on the head of the unit or the spring bars. For instance Reese spring bars have their capacity printed on them near where the chains connect to the bars if you have a system with chains or in the similar location on the bracket style systems. Where the bars and how the bars connect to the head is another help. There are a few different styles of connection. If you can provide...
    view full answer...

  • Length and Diameter of Replacement Round Bar for Curt Weight Distribution Systems
  • I spoke with Curt and spring bar # C17117 has an overall length of 30-5/8 inches and the diameter is 1-1/4 inches where it fits into the head. The length is measured from the center of the end that fits in the head to the center point between the holes of the small u-bolt that chain attaches to. This bar is meant as a replacement for Curt weight distribution systems rated for 1,000 to 1,500 pounds tongue weight and is not tested for any other application or brand of system.
    view full answer...

  • Recommended Round Bar For Weight Distribution And Suspension Enhancement For 2010 Chevy Silverado
  • I recommend the Replacement Spring Bar for Curt Round Bar Weight Distribution System - 800-1,000 lbs TW, # C17115, if your loaded tongue weight is 900 lbs. If it is higher than that, you will want the Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW, # C17117. I do recommend getting a suspension enhancement system for your 2010 Chevy Silverado. If you want air springs for a 1500, I recommend the Firestone Ride-Rite Air Helper Springs - Double...
    view full answer...

  • Replacement Spring Bar for Draw Tite Spring Bars 3221
  • According to Draw Tite the spring bar set part # PS58441 is a confirmed fit for your older Draw Tite system that used bars with the number 3221 on them. We only have them as a pair though.
    view full answer...

  • Recommended Weight Distribution System For Rockwood TT Trailer
  • The Curt Spring Bars # C17117 will not be compatible with your Draw-Tite (Reese or Pro Series) weight distribution system. I recommend you get a new system to meet the weight of your new trailer as well as help you reduce sway. When choosing a weight distribution system, you want to calculate the total tongue weight. Total tongue weight is the trailer tongue weight when completely loaded along with any weight behind the rear axle of your 2016 Ram 2500. For your application, I...
    view full answer...

  • Replacement Round Bar For Weight Distribution System
  • The Replacement Spring Bar for Curt Round Bar Weight Distribution System - 1,000-1,500 lbs TW # C17117 or the Replacement Spring Bar for Curt Round Bar Weight Distribution System - 800-1,000 lbs TW # C17115 are common replacements at a good price. The issue is I can't confirm their fit with your system, so I recommend replacing your entire system. I've attached a link to all your options for parts as well as replacement systems.
    view full answer...

  • Replacement Spring Bars For Curt Weight Distribution System To Increase Tongue Weight Capacity
  • I called my contact at Curt and they told me you can just replace the spring bars on your weight distribution system to be able to handle the increased tongue weight. I have attached a link to the replacement spring bars for Curt systems you can check out. You did not say if you have a round bar system or if your system uses trunnion bars. You can go to the provided link and find the right bars for you or let me know what type system you have and I will be glad to make a recommendation...
    view full answer...

  • Weight Distribution System Recommendation for Setup with 1,200 lbs Tongue Weight
  • Curt spring bars cannot be used in a Pro Series WD head. There isn't a set of spring bars that would allow your # PS49903 to be used on a setup with 1,200-1,300 lbs of tongue weight. Instead you would want the part # RP66131 as a replacement WD system that would work great for the tongue weight you have.
    view full answer...

  • Higher Capacity Spring Bars for a Curt Round Bar Weight Distribution System
  • For your Curt 17002 round bar weight distribution system you can use replacement spring bar # C17117 rated for 1,000 to 1,500 pounds. These are sold in quantities of one so you will need to order 2 to replace both bars on your current system.
    view full answer...

  • How Long is Curt Replacement Weight Distribution Round Spring Bar 17117
  • I spoke with Curt and spring bar # C17117 has an overall length of 30-5/8 inches and the diameter is 1-1/4 inches where it fits into the head. Only the Curt trunnion bar short-arm systems have spring bars that are 28-5/8 inches long. And all of those are trunnion bar systems so a round bar, # C17117, would not fit. But if you have a Curt round bar system rated for 1,000 pound tongue weight or 1,400 pounds tongue weight then this is the correct bar. The Curt round bars come in the...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jeff D
Written by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.