To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is rated for 21,000 lbs gross towing weight with a 5,250 lbs vertical load limit, giving you the strength to haul large fifth wheels with control and confidence. The solid steel construction and rust-resistant black powder coat finish provide long-term durability. Once it’s locked in, the hitch feels tight and secure on the road, even when towing heavy loads over long distances.
The automatic slider gives you 14" of extra clearance when cornering at slow speeds. As you turn, the built-in rack-and-pinion gear system quietly moves the hitch head toward the tailgate and back again when straightened out. You don’t have to climb in or out of the cab to operate a lever—just drive and let the mechanism handle it. It’s a smooth, controlled motion that keeps your trailer clear of the cab while backing or maneuvering in tight spaces.
The single-piece, wraparound jaw completely surrounds the king pin for 360 degrees of contact. That secure fit means less rattle and more stability compared to slide-bar designs. A 3/4" thick solid steel locking bar reinforces the connection and automatically locks when the jaw closes. Together they create a tight coupling that helps reduce chucking and gives you peace of mind that your trailer is firmly attached.

The double-pivot head moves both front to back and side to side for easy hookup and a smoother ride. Three polyurethane dampeners absorb road shock and cut down on noise while towing. The head naturally pivots into position as you back in to couple, taking stress out of lining up your trailer and making every mile feel steadier.
The pre-assembled hitch drops into the included above-bed base rails for simple installation. Bolt on the side plates, set one of three height positions—15-1/4", 16-1/2", or 18"—and secure it with the supplied hardware and safety pins. The diamond-plate base adds grip when stepping into the bed, and once installed, the setup feels solid without extra play or movement.


This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, Steven here with etrailer.com. Today we're gonna be taking a look at these Demco Premier Series custom mounting brackets for your fifth wheel above-bed base rails. Now these installation brackets do mount beneath the truck bed to provide you attachment points for your fifth wheel rails. Now those base rails that you're gonna need are sold separately. There's a picture of 'em up there in the corner. That part number is DM6071.
Again, that is sold separately. Just want to kind of show you what that's gonna look like. Now those will sit in the bed of your truck, and they will allow the installation of your fifth wheel trailer hitch. Now the custom brackets here that you're gonna get in all the hardware you see and the instructions, the fish wire here and your blue lock type, everything you see here is gonna come included. It is made here in the USA.
It's a very, very nice finish. It's got a five-year limited warranty. It's got a very nice, sturdy black powder coat. Let me pull one of these off here so I can show you kind of a side angle. So very, very well made, very strong, heavy duty.
They're gonna fit your application. Again, you want to utilize our etrailer.com fit guide. You'll type in your year, make, and model, and that'll help you select the right part for your specific vehicle. Now these, again, are custom made, so they will mount to existing holes in your vehicle's frame, and that should minimize most, if not all, the drilling. And again, it's gonna help reduce the installation time as well.
Now, again, because they're custom, it's also gonna avoid known obstacles along your truck frame. So, again, pretty simple install. Just take your time. There's not many parts here. And that's gonna do it today for our look at these Demco Premier custom mounting brackets for your fifth wheel above-bed base rails. I'm Steven with etrailer.com. Thanks for looking.
Ratings & Reviews

Jon G.
7/30/2021
Thank you for the review! While I do see where a hole in the mounting bracket would make this easier to remove with your Adapter Plate # DM6333, a solid bracket in this instance is much better for strength, especially considering this hitch is designed around the universal rails for trucks.

Richard
6/5/2019
Great, customer service with [Demco Representative] could not be any better..he knows this hitch like the back of his hand . I would buy another just because of him.

Sierra K.
9/1/2021
In the description it says locking plates, sold separately, are required for the Rota-Flex Pin box that you have. Item # DM6171

Darrel
1/17/2023
I firmly believe that every fifth sold should have one of these hitches. It is a job getting it in and out of truck but I feel better knowing its not going to let my trailer damage my truck.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Joe W.
10/26/2018
After about 6000 miles the hitch developed some fore and aft movement. After another 2000 miles it seemed to be excessive with a loud clunk when stopping and starting. Yes, I do grease it as per instructions before each trip. I called Demco and told them the problem and they sent me the parts I needed at no charge since it was under warranty. Since I had the mechanical ability I disassembled, diagnosed and repaired it myself. I thought later on that I should have been compensated something for my time only because if I took it to a dealer they would have charged for labor. Just a suggestion, there needs to be an easier way to lubricate this hitch rather than removing the large pivot pin and also the large pivot bolt and greasing them by hand. Some well placed grease fittings would make this job a lot easier and cleaner, especially when on the road. Also, the hitch owner would be far more inclined to do it. Other than that the hitch has performed great and I am very happy with it. Thanks.