To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
No need to stop, get out, and pull a lever before turning. The built-in automatic slider gives you 14" of fore-and-aft travel so your trailer clears the cab in tight spaces at slow speeds. The rack-and-pinion gears smoothly glide the hitch head toward the tailgate during a turn and back toward the cab when straightening out. It keeps the motion controlled and predictable, helping you maneuver through campsites or parking lots without binding or jerking.
The single-piece wraparound jaw locks around the king pin for full 360-degree contact, giving a solid, rattle-free connection that resists movement on rough roads. A 3/4" thick steel locking bar reinforces that hold by automatically engaging when the jaw closes. Together they cut down on clanking and chucking so your towing feels smoother and quieter mile after mile.

The double-pivot hitch head moves both front to back and side to side, helping absorb bumps and uneven road surfaces. Three polyurethane dampeners cushion each pivot point to reduce noise and jarring. When you back in to hook up, the head automatically pivots into position so coupling feels natural and clean without fighting the angle of approach.
Built from sturdy steel with a rust-resistant black powder coat finish, this hitch is rated for 18,000 lbs gross towing weight and 4,500 lbs vertical load. That kind of strength means you can haul large fifth wheels with confidence knowing the connection is solid from start to finish. The reinforced base design adds stability while keeping your setup secure across long stretches of highway.
The included underbed mounting kit makes installation straightforward—bolt on the side plates, set your height between 15-1/2", 16-3/4", or 18-1/4", then drop it into the receivers. When you’re done towing, remove a few pins, turn the handles, and lift it out for full bed access. It’s a clean system that keeps your truck bed open when you need it without extra tools or hardware left behind.


This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement side plates for the Demco Hijacker Autoslide fifth wheel trailer hitches, and this is for the underbed mount. Now this will replace the side plates that came standard with your Demco Hijacker Autoslide underbed fifth wheel trailer hitch. They are designed to bolt onto your hitch base so that you can attach your hitch to the custom underbed rails. This is designed to fit the 13,000 pound Hijacker, Part Number DM8550041. It also fits the 18,000 pound Hijacker, DM8550022, and the 21,000 pound Hijacker, DM8550037 models. This is a simple bolt-on installation to your hitch base. There are multiple rows of bolt holes on these side plates and on your hitch base, so depending how you line them out, it will let you adjust the hitch height.
The hitch height settings will go from either 15-1/2 inches to 16-3/4 and 18-1/4, so you have your choice of those three settings to get your trailer and tow vehicle as level as possible. These do have a rust-resistant black powder coat finish. They are an all-steel construction. It does include the instructions. It will include the mounting hardware, and it also includes two 1/4-inch spacers and two 3/8-inch spacers, and the spacers are used for adjusting your hitch mount with the bed pockets of your truck, and this part is made in the U.S.A. The way that these would open up is you just pull the clip, pull the pin out, and you can see each one of these will rotate out, and when you rotate those out, it will let you drop it into your underbed mount, and then once there, you just turn this back in to lock it, and then put your clip right through there just like that. This part is made in the U.S.A. That should do it for the review of the replacement side plates for Demco Hijacker Autoslide fifth wheel trailer hitches with the underbed mount..
Ratings & Reviews

Thomas S.
2/7/2019
THE BEST FUNCTIONAL SHORT BED 5th WHEEL HITCH OUT THERE BUT ALSO THE HEAVIEST AND THE MOST DIFFICULT TO REMOVE AND REINSTALL. I HAD TO TAKE IT TO A GARAGE TO REMOVE IT AND AGAIN TO REINSTALL IT. I JUST LEAVE IT IN THE TRUCK BED NOW RATHER THAN FIGHT WITH IT.

Andy
3/15/2022
The Demco hijacker 18 K I think is the best hedge out there by far three different height settings and the auto slider part of it is awesome haven’t had an issue at all
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Buddy R.
3/24/2019
good happy with the whole set up.had a small issue that demco remedied swiftly.only other thing is the finish does not seam to last.it is covered when not in use and it chips and rust,s easily