To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The automatic slider on this hitch gives you 14" of travel front to back, so it adjusts itself as you turn. You don’t have to get in and out to pull a lever or set a manual slider. The rack-and-pinion gears move the hitch head smoothly toward the tailgate when you turn and back toward the cab when you straighten out. That built-in motion keeps your trailer clear from the cab during slow, tight turns while keeping everything controlled and steady.
The wraparound, single-piece jaw gives 360-degree contact with the king pin, creating a firm connection that limits rattle. A solid 3/4" steel locking bar reinforces that jaw and automatically locks when closed. Together, they keep the trailer secure and cut down on noise and movement that can wear you out on long hauls. It’s a rock-solid setup that feels planted once hitched up.

The double-pivot head makes coupling easier by letting the head move front to back and side to side as it meets the pin box. Three polyurethane dampeners cushion those movements to soak up road shock and reduce towing noise. That makes for smoother starts, fewer jolts over rough sections, and an overall steadier ride between stops.
Installation is simple with the included rail adapter that drops right into your factory puck receivers. Once pinned in place, you attach the pre-assembled base and bolt on the side plates to pick your preferred hitch height—15-1/4", 16-1/2", or 18". The height range lets you fine-tune for bed rail clearance and level towing without extra parts or modifications.
This hitch is rated for 21,000 lbs gross towing weight and 5,250 lbs vertical load, built from solid steel with a rust-resistant black powder coat finish. The design is made for towing large fifth-wheel trailers while keeping everything stable mile after mile. Once in place, it feels tight through every connection point so your setup stays dependable on long trips.


This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is Jeff at etrailer.com. Today I'm going to take a look at this Demco fifth-wheel rail adaptor for the Ram OEM fifth-wheel towing prep package, and this has a 25,000 pound weight capacity. Now this is a custom fit part, it is designed to fit the 2013 and newer Dodge Ram and Ram 2500 and 3500 trucks that have the OEM fifth-wheel towing prep package. Basically, this adapter's perfect if you want to use your standard fifth-wheel trailer hitch that'll mount to above-bed rails with the Ram's trucks factory installed under-bed fifth-wheel mounting kit. This will convert that factory installed under-bed kit from your Ram to the standard above-bed fifth-wheel base rails. You can see right here, these are the rails that your fifth-wheel tabs will drop into.I wanted to show you how this mounts to your factory system, I'm going to zoom in on one of the corners.
You'll do this on all four corners. But basically you'll have this handle here, and you have this safety pin, so you'll pull out the safety pin just like that, and then you'll rotate this handle all the way 90 degrees. When you do that, these tabs on the bottom here will line up with each other, and that'll allow you to remove it are inserted into the factory system. You just drop it into the pucks, and then to lock it into place, all you do is rotate this back 90 degrees until the hole lines up, and you'll notice it locks it into the tabs. And then you just take your safety pin for safety, push it in and it'll hold it into place, so there's no drilling or welding required with this.
And again, this is on one corner, you'll do this on all four corners. Just zoom back out and you can see you'll do it on all four corners.What you also want to remember is that the Ram trucks use different size tabs and sockets on the front and the rear of the vehicle, so you want to make sure when you install this, that you install it correctly. Basically they even have an arrow here that shows you pointing this way, meaning towards the cab. So up here is the smaller tabs, that's always on the cab side or the front of the Ram, and on the very back by the tailgate is the larger rear tabs. And to even help you with it, besides this arrow here, if you look at the front ones, the bolts are silver-colored, or the tabs also underneath.
And if you look at the rear ones which are larger, they put a yellow zinc finish on them, so that will even help you determine which is front and which is rear.The adapter itself is a nice rust-resistant black powder coat steel construction. It is made in the USA. Again, the application is for 2013 and newer Ram trucks that have that OEM under-bed towing prep package. Maximum capacity, which is stamped on it right here is 25,000 pounds. Just to let you know, when you do install this, this adapter will add about 1 3/8" height to your fifth-wheel hitch.
But that should do it for the review on this Demco fifth-wheel rail adapter for the Ram OEM fifth-wheel towing prep package, and this has a 25,000 pound weight capacity..
Ratings & Reviews

Doug
6/17/2026
Denco Autoslide 5th wheel hitch is working perfectly a year later. Weve traveled extensively across the USA and Canada over year, the hitch has performed as expected each time. One key, keep the hitch and king pin clean and well lubricated.

John
7/17/2023
Still working great.

Charles
6/1/2019
It works fantastic! Easy to install for towing 5th wheel and then easy to remove to have complete, open bed for hauling.

Andrew
9/20/2020
after 1 year, the hitch adapter is still looking good. no paint chipping, no rust. still pulling strong.

Lazer S.
3/3/2026
Glad it's working well for you, Mike! Other than the rattle. You could try putting a thin rubber sheet in between the hitch and the adapter to see if that helps, but I don't think it will be a problem. What kind of trailer are you towing?

Joe W.
10/26/2018
After about 6000 miles the hitch developed some fore and aft movement. After another 2000 miles it seemed to be excessive with a loud clunk when stopping and starting. Yes, I do grease it as per instructions before each trip. I called Demco and told them the problem and they sent me the parts I needed at no charge since it was under warranty. Since I had the mechanical ability I disassembled, diagnosed and repaired it myself. I thought later on that I should have been compensated something for my time only because if I took it to a dealer they would have charged for labor. Just a suggestion, there needs to be an easier way to lubricate this hitch rather than removing the large pivot pin and also the large pivot bolt and greasing them by hand. Some well placed grease fittings would make this job a lot easier and cleaner, especially when on the road. Also, the hitch owner would be far more inclined to do it. Other than that the hitch has performed great and I am very happy with it. Thanks.

Marilyn G.
8/7/2020
It is working just fine. We are very well pleased with it.

Heather A.
1/10/2018
Ralph,Demco does allow for a bit of back and forth adjustability during the installation of this adapter. The locking socket drivers that attach to the locking tabs on the adapter have elongated holes for fitment purposes. These elongated holes should allow you to install it to align with the factory puck system in your truck bed.Thank you.

Victoria H.
3/26/2025
Thanks for your feedback Scott, your insight is helpful!
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Gwendolyn Y.
5/28/2025
You deserve a major high-five for installing this monster by yourself! That's a big feat to take on! I'm happy that everything smoothed out in the end and that you are enjoying the hitch! What kind of camping trips are lined up so far for the summer?