Arrives before Christmas 
90" Long x 12" wide pair of ramps make it easy to load 4-wheeled equipment with low ground clearance onto your truck bed. Ramps feature rugged aluminum construction, an arched design that allows for extra clearance, and 2 safety straps.
Specs:
Features:
Note: This set of Erickson 1,500-pound-rated loading ramps is perfect for year-round use. Their arched design is ideal for heavy-duty, 4-wheeled equipment that sits low to the ground, such as your lawn mower, golf cart, utility vehicle, or ATV. The sturdy yet lightweight aluminum construction and attached straps make this set of ramps easy and safe to use.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbor, Steven here with etrailer.com. Thanks for joining me while we take a look at our Erickson Arched Aluminum Loading Ramp Set. Now, these are a non-folding set. They are arched, they are 90 inches long by 12 inches wide, and they have a combined weight rating of 1,500 pounds. So, folks, like I said, combined weight rating, 1,500 pounds, so 750 pounds per ramp. Again, each ramp is 90 inches long by 12 inches wide.
Make sure it's not gonna touch my ceiling here. So, obviously I'm not gonna be able to fit the whole thing in the frame here. I do wanna spin it around. You can kinda see that arch just like you can back there on the one that's laying down. Now, these are made of an extruded aluminum and they've been welded together, all the rungs and the top there as far as the part that's gonna sit onto the trailer or the, maybe truck bed or something like that.
I've got up close. There's the rungs. You can see they give you the traction there. It's gonna be nice for loading and unloading, maybe in mud, dirt, snow, that kinda stuff. Again, lightweight because they're aluminum, they're not too heavy.
I'm guessing maybe 10 pounds each, if even that. I don't have exact weight on 'em from the manufacturer, but maybe 10 pounds a piece. And if you'll notice, each of these ramps has this safety strap on it. That safety strap is there, just exactly like I said, for safety. What you wanna do is you wanna take this when you're set up, let me put this one outta the way, so when you're set up like this, you wanna take this strap and you want to get it loose, and then you're gonna wanna hook it up underneath the frame of the trailer, and then you wanna cinch that tight and what that's gonna do, when that's tight, it's gonna keep this ramp from pulling out and pulling away and sliding off whenever you're using it.
So, a very nice safety feature there to keep your ramps in place when you're using 'em. Once again, that arched design creates extra clearance, so now you can get those four-wheeled equipment up off the ground and give you a higher ground clearance. Well, folks, that's gonna wrap it up for our quick look today. Thanks for joining me while we look together at these Erickson Arched Aluminum Loading Ramps. Again, non-folding, 90 inches long by 12 inches wide. I'm Steven, have a good one.
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
90" Long x 12" wide pair of ramps make it easy to load 4-wheeled equipment with low ground clearance onto your truck bed. Ramps feature rugged aluminum construction, an arched design that allows for extra clearance, and 2 safety straps.It’s light and easy to put in place. It is structurally built good.
Thanks for the fast delivery
I went with the longest ramps I could get to avoid deck hang ups while loading and unloading on the pickup and these ramps deliver. The 3000# ramps hold my Deere GX345 with wheel weights and my 230 butt with no problem and little sag. I can only ask that the pickup tailgate tabs be an inch longer for more grasp as the truck can rock while loading. Always use good straps!
The product arrived just as I was told to anticipate them. I used the ramps for our customized golf cart and it worked great. For those who are looking for a safe way to get your golf cart on the back of a high truck bed, consider buying these ramps. 3000 lb capacity is more than you'll ever need and just sell them after you use them if you want and have a safe way to make the transitions! We're keeping ours and loaning them to others who need reliable loading capabilities. Thanks for such quality and reliability for a job made much easier!
I have been using these ramps for a year now. They work perfect for my F350 to get a golf cart into it. The ramps even fit perfectly under the golf cart when in truck bed. I purchased other ramps that didn't work with the F350 but these work perfect. Smart buy!
etrailer was very helpful with my order. I didn’t want the ramps shipped when I placed the order, so they held them for me, called me a few weeks later to inquire if I’d like them sent. Which I did and quick delivery. Thank you!
All products were great! Packaging on one of the boxes was open on both ends. Looked to be they were in such a rush to get the products out ( a great thing) the tape don't stick well however all was accounted for. Tamara was an incredible help. Calling me to let me know the original product I needed was not in stock but she helped me find one that I believe was better. She worked with me to get both items I needed to add to my truck before we left for vacation. I was able to track the items via the link they provided in the confirmation email of my order. It's was a great interface. Got the items a day before I expected them. Always great support and products from this company.
Parts orders where Thule traverse roof bars. And golf cart loading Ramps.
I use these ramps for everything from a riding lawn mower to a Polaris General SxS to a skid loader. They perform well under all uses
I've had it for a year now and use it often. It still looks as good as new and is very reliable. My favorite part if that it folds up and fits inside my truck so I can lock it up and not worry about it going somewhere.
Arrived in good shape, although one load binder fell out of packaging, ups guy saw that I got it. Was disappointed to read that I to winch units on to trailer?! Will send pics after I drive units on. Mike
Everything I was hoping for in a set of truck ramps. I have an 800 CFMOTO and these 3000 lbs ramps allowed me to load in confidence. I recommend these ramps.
Erickson arched loading ramp EM07441 nice stronglite sturdy fantastic fast shipping Thank you
Used them yesterday. Lightweight and strong enough so far. Much better then moving around my old steel ramps.
I have a very unique application for these ramps. But in the mean time these will also work other vehicles; to load my lawn tractor and my chipper. So I am very pleased. these are exactly what I need and eTrailer got them to me in record time.
Strong and sturdy!
Works Just Like Advertized
Exceeded my expectations. Lightweight, but sturdy ramps.
They work good for Ioading the tractor.
Fast shipping & great product at great price
Strong, light, and easy to use!
Good quality, shipped fast
Great ramps
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.