view cartView Cart
Only 7 Hours 25 Minutes Remaining

Buy Any Access Roll-Up Cover and Get a Free Bottle of Access Cover Care Cleaner and a 9V LED Light
Buy Any Extang eMAX Tonno and Get 50 Dollars on a Mail-In-Rebate

Toyota Tacoma Tonneau Covers

change vehicle

Select Toyota Tacoma Year

Tonneau Covers

Custom fit Tonneau Covers for your:



Available Years for Toyota Tacoma Tonneau Covers



Toyota Tonneau Covers

Roll up or hatch style tonneau covers by Extang, Access, Truxedo, BAK Industries, or Craftec are custom fit to your Toyota. Most covers provide a simple no-drill installation on your Toyota, and all tonneau covers offer either a roll-up or easy removal design to allow you to adjust for any of your hauling needs.




What our customers are saying:

Thank you. Very happy with the product and the service received. I will make business with you anytime.

Vicente

San Diego, CA




Truck Bed Tonneau Covers

Enter the year, make and model of your truck above to find custom a fit tonneau cover. We offer tonneaus for all types of trucks including Ford, Dodge, Chevy, GMC, Honda, Toyota, Nissan and Mazda. They are available from the highest quality manufacturers, such as extang, BAK, Access, Truxedo, Bestop and Craftec.


Tonneau Cover Accessories



Tonneau Cover Manufacturers



You may also be interested in...




Toyota Tacoma Tonneau Covers Videos

BAKFlip G2 Hard Tonneau Cover Installation - 2014 Toyota Tacoma

Today in this 2014 Toyota Tacoma, we're going to install part number BAK26407. First thing we're going to do is go ahead and install our hardware for our rails. We're going to slide the square headed bolts into the tracks that are already installed into the bed of the pick up truck. In this truck, we're going to use three on each side. Now, we'll go ahead and attach our rail into the truck. We'll go ahead and slide it forward as far as possible.



Extang Revolution Soft Tonneau Cover Installation - 2014 Toyota Tacoma

Today on this 2014 Toyota Tacoma, we'll be installing the Extang Revolution tonneau cover part number Ex54915. To begin our install, we'll go to the rails here in the bed of the truck and remove the in caps. We'll take three blocks from our install kit and slide them into position. We'll repeat this on the other side of the truck bed. Next, we'll move on to the rails from our tonneau cover, we'll first remove adhesive strips off the foam on the sides of the rails. Next we'll install plates into the rails. You want to make sure that the flat side of the plate goes against a rail.





Toyota Tacoma Tonneau Covers Questions and Answers


  • Tonneau Cover for a 2007 Toyota Tacoma with OEM Bed Liner, Rails Caps, and Deck Rail System
  • Access has the following note on bed liners: NOTE ON BED LINERS: With an under-the-rail drop in bed liner, installation is possible with minimal trim cutting of bed liner at front corner of box and back by tailgate to allow side rail to install properly. Considerable trim cutting is required with an over-the-rail drop in bed liner. The cargo management system could be an issue. I have linked the instructions for you so you can see how the cover installs and to determine if there will be in
    view full answer...

  • Installing the Extang Solid Fold Tonneau Cover in a 2014 Toyota Tacoma Double Cab with 5 ft bed
  • This Extang Solid Fold Tonneau Cover # EX56905 is confirmed as a fit for your 2014 Toyota Tacoma. I have confirmed with my contacts at Extang, and there is an additional bracket system included specifically designed as a custom fit for your truck. This bracket system will install in the utility track on inside edge of your truck bed rail, and alleviates the need for trimming or altering the factory installed bed cap or bed liner on your truck. It provides an appropriate mounting surface for
    view full answer...

  • Tonneau Cover for a 2014 Toyota Tacoma Double Cab Long Bed with OEM Bed Extender
  • I spoke with my contact at TruXedo and she stated that the Lo Pro QT tonneau cover, # TX556901, has side rails that stick out 3 inches on each side of the bed towards the inside of the bed. If the OEM bed extender on your 2014 Toyota Tacoma can fold up and that 3 inches on either side for the tonneau rails does not interfere then you can use this cover. All tonneau covers will have the side rails that stick out towards the inside of the bed, some less than others. The best option would be the
    view full answer...

  • Will Craftec Tonneau Cover, Part #554735, Fit 2011 Toyota Tacoma with Factory Tie-Down System
  • The Craftec Tonneau Cover for 2011 Toyota Tacoma, part #554735, will fit the 5-foot bed either with or without the factory-installed tie-downs. My contact at Craftec confirms that special custom clamps are supplied (at no additional charge) for this products application to your vehicle. This Craftec hatch-style tonneau cover installs without drilling and can be operated by one person. It is fully compatible with under-the-rail bed liners and can be used with over-the-rail liners with some min
    view full answer...

  • Lockable Tonneau Cover Recommendation for a 1998 Toyota Tacoma with a 6 foot bed
  • Check out the Access Tonneau Cover # 834532000432. This cover uses a single latch with a slide lock that will prevent the cover from being opened without the tailgate first being opened. So if you got a locking tailgate handle like the Pop and Lock Custom Tailgate Lock # PAL5100 as well as the # 834532000432 you would be able to lock the tailgate and prevent access to the truck bed of your vehicle.
    view full answer...

  • Tonneau Cover Recommendations for a 2012 Toyota Tacoma Base Access Cab with 6-Foot Bed
  • The Access tonneau cover # A22050189, is designed for the 5-foot bed models on the 2012 Toyota Tacoma. For a 6 foot bed, you will need # A22050179. I have included a link to all of the tonneau covers we carry that will fit the 6 foot bed models.
    view full answer...

  • Does a Bed Liner have to be Trimmed to Install an Access Tonneau Cover on a 2012 Toyota Tacoma
  • According to Access, with an under-the-rail drop in bed liner, installation is possible with minimal trim cutting of the bed liner at the front corner of the truck box and back by tailgate to allow the side rail to install properly. Considerable trim cutting is required with an over-the-rail drop in bed liner.
    view full answer...

  • Can a LiteRider Roll-Up Tonneau Cover by Access be Used on a 2010 Toyota Tacoma with a Bed Liner
  • I checked with Access and as long as your plastic bed liner does not come up and over the side rails you could use this LiteRider Roll-Up Tonneau Cover by Access # 834532006724 on your 2010 Toyota Tacoma. If the bed liner does come up and over the side rails you will need to trim back that portion.
    view full answer...

  • How Much Weather Protection Would the Bestop Collapsible Bed Cover Part B76308 Provide
  • The Bestop Supertop Collapsible Bed Cover, part # B76308 would do a pretty good job of keeping the bed of your truck dry. The side window zippers and the point where the rear of the Supertop would meet the tailgate would be the two points were the Supertop might be vulnerable to water seepage. The Supertop is not what I would be called theft-proof, but in order to remove it quickly, a potential thief would need to be familiar with how it attaches to the vehicle. To view the installation p
    view full answer...

  • Can a Bestop Supertop for Trucks Fit a 1995 Toyota Tacoma with a Bed Liner and Will it Leak
  • According to my contact at Bestop, you can install the Supertop for Trucks, # B76306, if your 1995 Toyota Tacoma has a bed liner. If it is a spray in bed liner, you would just follow the instructions like normal. I have included a link to the instructions for you to view. If it is a slide in type of bed liner, you may need to cut and trim the bed liner in order to get a secure connection for the clamps. According to Bestop, the Supertop is weather resistant but not waterproof. For somethi
    view full answer...

  • Will Access Roll-Up Tonneau Cover, # 834532006755, Fit On 2006 Toyota Tacoma With Factory Rails
  • Yes, this Access Roll-Up Tonneau Cover # 834532006755 will work on your 2006 Toyota Tacoma Double Cab with a short bed and allow you to use your factory side rails and tie downs. Access says it fits behind your factory rail system. You will need to remove the factory rail system and reinstall the Access cover hardware along with the factory rail system.
    view full answer...

  • Recommended Tonneau Cover for a 2011 Toyota Tacoma Double Cab Long Bed with Deckrail System
  • I spoke with my contact at Access about Tonneau Covers for your 2011 Toyota Tacoma with the deckrail cargo management system. She stated that they do have 2 options that are compatible with the system, but to avoid low profile covers because they can cause fit issues. The covers that would work for you are the Access Tonneau, # 834532006700, and the LiteRider Tonneau, # 834532006724. I have included links to the instructions for the Access model for you to view.
    view full answer...

  • Bestop Collapsible Bed Cover for Toyota Tacoma with 5 foot Bed
  • Bestop does offer a Collapsible bed cover for the 2005-2010 Tacoma with a 5 foot bed. The part number is B76308. The mesh kit mentioned does replace the windows and is transparent. The mesh kit is part # B76308. I will provide links to the product descriptions for each product below. The product description for the mesh kit shows a photo of the kit, so you can see what it looks like when installed in the bed cover. I will also provide links to the installation details for each product, you
    view full answer...

  • Will Access Roll-Up Tonneau Cover, # 834532006755, Fit On 2008 Toyota Tacoma With Factory Rails
  • I called the manufacturer (Access) and they said that the Access Roll-Up Tonneau Cover- Tacoma Double Cab Short Box, # 834532006755, will work together with your 2008 Toyota Tacoma factory rail system. They said it fits behind your factory rail system. You will need to remove the factory rail system and reinstall the Access cover hardware along with the factory rail system. I also have the Access Roll-Up Tonneau Cover, # 834532006700, which fits the 2008 Toyota Tacoma Double Cab Long Box.
    view full answer...

  • Will the Access Tonneau Cover # 834532006717 Fit on a 2010 Toyota Tacoma with Factory Bedliner
  • The Access Tonneau Covers for the 2010 Toyota Tacoma, 834532006717, will fit on your Tacoma with factory bed liner, if it is not an over the rail type of bed liner. Over the rail bedliners usually interfere with the seal of the Tonneau cover so we do not recommend this installation. If your bed liner ends under the bedside rail on your truck then the Tonneau will work, but you may have to trim a small area where the clamps are installed depending on how thick the bed liner is in those areas.
    view full answer...

  • Tonneau Cover for a 2004 Toyota Tacoma With Over the Rail Bed Liner
  • The LiteRider Roll-Up Tonneau Cover, part # 834532001279 will fit your 2004 Toyota Tacoma with a 6ft bed. This tonneau cover will work great for you, unless your Tacoma has the stepside. Since the cover is a clamp-on style, you should not have to remove or cut your bedliner.
    view full answer...





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email



Only 7 Hours 25 Minutes Remaining

etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com