Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
(31 reviews)
Price: $505.92
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
Retail:$543.74
Our Price: $505.92
You Save: $37.82
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
- All Info
- Reviews (31)
- Q & A (0)
- Photos
Kodiak Trailer Brakes
- Disc Brakes
- 5200 lbs Axle
- 6000 lbs Axle
- Rotor
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Marine Grade
- 6 on 5-1/2 Inch
- Kodiak
Trailer disc brake kit includes 2 assemblies with rust-resistant, Dacromet-plated rotors; calipers; and mounting brackets. Assemblies fit 5,200-lb to 6,000-lb axles and 15" and larger wheels. 12" Rotor has 6 on 5-1/2 bolt pattern.
Features:
- Brake assemblies make it easy to change from an idler axle to a disc brake axle
- Disc brakes deliver better performance than drum brakes
- More consistent stopping, even at highway speeds
- Dramatically shorter stopping distance
- Maintenance costs are lower than for drum brakes
- Fewer moving parts to maintain, repair and replace
- Dacromet coating provides superior corrosion resistance for freshwater or saltwater use
- 300- to 400-Hour salt-spray rating
- Slip-on, cast iron, over-the-hub rotors
- Fit over standard idler hub and are held in place by wheel and wheel bolts
- Remove easily for maintenance
- No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged
- Increase distance from hub face to hub face by 1/2"
- Prevent heat-related damage with vented design that effectively dissipates heat
- Cast iron calipers are self-adjusting for smooth, equal braking
- Cast iron construction does not flex like aluminum
- Low-drag design retracts piston farther than other calipers for a cooler-running brake
- Stainless steel piston is 2-1/4" in diameter - 30 percent larger than other brands
- More braking torque than the competition
- High-performance, ceramic brake pads
- Ductile iron mounting brackets provide strength and durability
- Side-support design ensures that load is placed on bracket, not bolts
- Extra embossing for additional thread contact ensures tight, secure mounting for caliper guide bolts
- 5-Bolt brake flange mounting configuration - weld-on flange sold separately
- Kit includes 2 full brake assemblies
- 2 Dacromet-plated, cast iron rotors
- 2 Dacromet-plated, cast iron calipers
- 2 Dacromet-plated, ductile iron caliper-mounting brackets
- 4 Stainless steel caliper-mounting bolts
- Hydraulic brake actuator and lines (sold separately) are required for brakes to be activated
- Requires psi rating of at least 1,500
Specs:
- Fits
- Axle capacity: 5,200 lbs - 6,000 lbs
- #42 Spindle
- Wheel size: 15" and larger
- Axle capacity: 5,200 lbs - 6,000 lbs
- Bolt pattern: 6 on 5-1/2"
- Overall rotor diameter: 12"
- Brake flange configuration: 5 bolt
- 3-Year warranty
Disc Brakes
More and more people are switching their trailers over to disc brakes, and with good reason. Disc brakes deliver consistent braking - even at highway speeds - unlike drum brakes, which often show a substantial drop in braking torque at higher speeds. In addition, disc brakes offer a substantially shorter stopping distance than drum brakes.
Disc brake calipers have only one moving part, rather than the many found in drum brakes. This means that there are fewer parts to maintain, fewer parts to get damaged and fewer parts to have to repair or replace, thus reducing maintenance costs.
Over-the-Hub Rotor
Kodiak's slip-on, cast iron rotor makes it easy to convert an idler axle to a disc brake axle. Simply place the rotor over your hub. It is most often wheel bolt piloted for a loose fit and then held in place by the wheel itself. With a separate rotor and hub, you can easily repair or replace one element of your brake system without having to junk the whole thing.
Calipers
Kodiak calipers are constructed of cast iron to prevent flexing. Less flex means more braking torque, resulting in smooth, even braking every time. The corrosion-resistant stainless steel piston is 30 percent larger than standard pistons, ensuring shorter stopping distance and increased torque. In addition, the unique low-drag design of Kodiak's calipers allows the piston to retract farther than in most standard models, giving you a cooler-running brake.
Mounting Brackets
Designed for axles with 5-bolt brake flange configurations, the included mounting brackets are made of heavy-duty ductile iron that is embossed to provide additional threading for guide bolts. The added thread strength ensures a tighter, more secure connection between the caliper and bracket. Another unique feature of Kodiak's brackets is the side-support angle, which guarantees that the load is carried by the bracket, rather than the bolts.
2/R-12-DDD-K Kodiak Disc Brakes - 2 Wheel Set - Rotor Only - Dacromet Finish - 5,200 lbs - 6,000 lbs
Replaces 2/RCM-12-SCAD (K2R526SC) and 2/RCM-12-DAC-K
Item # K2R526D
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Did not arrive in time
Customer Reviews
Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs - K2R526D
Average Customer Rating: 5.0 out of 5 stars (31 Customer Reviews)
Trailer disc brake kit includes 2 assemblies with rust-resistant, Dacromet-plated rotors; calipers; and mounting brackets. Assemblies fit 5,200-lb to 6,000-lb axles and 15" and larger wheels. 12" Rotor has 6 on 5-1/2 bolt pattern.by: George06/02/2023
Excellent experience all the way around! Fast shipping. Simple installation. Great instructions and videos. Reasonable prices. The best part though is the customer service. I ended up speaking to William B a couple times and he guided me thought ordering exactly the right thing. He had me confirm various measurements on my trailer to ensure I had the correct parts. Actually he helped me discover that the parts I was removing were incorrect so if we had of replaced like for like I would have had problems. Getting this right up front made the installation and final quality what it should be. Thank you eTrailer and thank you William!
by: Captain Rick08/23/2023
may cost a little more but I have not had any problems and Drive from Birmingham Al to Panama city beach Fl. at least 6 times a year to put my sea hunt off shore boat in to fish (Salt water) No corrosive at all yet only one flat tire
Thank you for the great service
:)
by: Steve D08/08/2016
I used this kit to add surge brakes to my 5200#-axle boat trailer. I bought it a couple months ago and it did not have brakes but really should have. The parts are well made and installed easily once I acquired the bolts I needed that weren't included. The description and pictures are not 100% clear that the mounting bolts to put the brackets on the trailer brake flange are not included. I'm not sure why they don't come with the kit but I ended up getting some 1.25" x 3/8" SS bolts to mount them. While the hat-style rotors are nice from a price and ease of replacement perspective, if your lug bolts don't have extra length, you would be better off getting the integral hub and rotor version. Finding longer lug studs for my 20 year old trailer and removing the old ones was a PITA. Had I known, I would have spent the extra $ for the integrated hub/rotor set. The calipers have bleeding screws on both top and bottom so they can be mounted on either side of the trailer. That's a nice feature as its one less thing to go wrong.
Once installed with new actuator coupler and brake lines, the brakes made a huge difference in towing the boat. The boat alone is 3000# and the trailer and gear probably add another 750 or so. It used to push my Yukon XL around when braking but now it tows smooth and easy.
etrailers was awesome to work with. Good communication via email and simple fast ordering and shipping. I will definitely use them for future trailers get needs.
by: Michael 02/01/2022
Bought Kodiak full kit of rotors, calipers, and primary hydraulic actuator from eTrailer for my triple axle boat trailer and perfect result. Competitor was couple dollars cheaper, but couldn't answer simple product questions and squirrely about delivery details, and I don't have patience for that crap. Let's go eTrailer!
by: John08/20/2020
Great company! Everything was streamlined and processed very quickly with fast shipping. The website is among one of the best out there. Bought this Kodiak brake kit as a replacement for my boat trailer which had Tie Down parts and it fit perfect. Really helpful how to and review videos were available as well. I definitely recommend etrailer.com and am now a customer for life. Product delivered matched the description 100%.
by: Joseph09/29/2021
I purchased this Kodiak Disc brake a little over a year now and had no problems so far. I check them each time I return home and they look fine. Good product.
by: Robert 10/22/2021
After one year on the trailer and a 450 mile road trip, installed parts are holding up well and foresee no problems for a couple of years.
by: Mark07/13/2017
The staff at etrailer are great. We had a urgent need to get our trailer able survey boat to project site and realized the trailer was in need of repair when we trailered the boat. I called etrailer and they had all the parts needed and was able to ship quickly to us. The parts fit and work great. Thanks a lot!
by: John 08/28/2021
Everything seems fine, my son installed last year as my trailer had been sitting outside not being used for a couple of years. Thank you!
by: Casey F.05/14/2014
The brake kit came with everything I needed. It seems to be of good quality and is working great. Installation was very easy. Fast delivery and good customer service.
by: Jason06/17/2022
Even came with brake pads!
by: Harry 08/19/2020
Excellent product. The brakes operate as they should.
etrailer ships quick and complete.
by: Gary 06/27/2021
no problems bleed easy had to remove one stud from dexter axel
by: Rita11/01/2019
Product was great. Customer service was also outstanding. Phyllis helped me correct an order mistake that I made. I got the right parts and shipping was fast.
by: Benny Hopper01/20/2017
I have been generally satisfied with all the items I have ordered from Etrailer.com they are fast friendly and right on time
by: Darren 05/18/2021
Kodiak brakes are great product
by: Donald N.01/14/2015
Product came on time, everything that I needed. Will certainly buy from etrailer again. 5 Star
by: Robert 08/12/2022
Very fast resolving a problem excellent customer service
by: Robert08/12/2019
order came in perfect,easy to order the correct parts .
job went perfect .
by: Dane05/15/2016
Correct parts at fair price Thanks
by: Brian H.07/06/2015
totally happy with this product but the speedy delivery and their expertise on the phone ordering is second to none thankyou
by: Harry 05/16/2021
Works perfect!
by: Michael 07/30/2022
Always a good experience!!
by: ANDY03/24/2014
ALL IS GOOD, THANKS
by: Michael 03/29/2023
25
31
Show More Reviews
See what our Experts say about this Kodiak Trailer Brakes
- How to Determine Correct Replacement Disc Brake Rotor & Calipers For 5,000 lb Square AxleThank you for the photo, that was helpful, and while there are no specific replacement parts for your trailer, there may be an option that will work. I say "may" because there aren't brake kits for 5,000 lb axles, and I'm not quite sure what the dimensions are of your brake mounting flange. If that flange has holes spaced 2-7/8 inches apart on center, and your hub has a 5 on 4-1/2" bolt pattern, then you can add a rotor and caliper brake kit for 3,500 lb axles, the Kodiak Disc Brake Kit...
view full answer...
- Best Disc Brake Setup For A Tandem Axle Trailer With 10,000 Lb. CapacityIn order to determine the correct disc brake setup to use on a 5 ton trailer, I would need to know the capacity of your trailer's axles. You can find this by locating the information tag placed on the center of the axle or by calling the dealer with your VIN. I have listed my disc brake recommendation for the following axle capacities: 3,500 lbs : 2 Kodiak Disc Brake Kit part # K2HR35D 5,200 lbs : 2 Kodiak Disc Brake Kit part # K2R526D 7,000 lbs : 2 Kodiak Disc Brake Kit part # K2HR712D Remember,...
view full answer... - Installation Instructions for Kodiak 12" Disc Brake Kit # K2R526DI have linked the installation instructions for the Kodiak Disc Brake Kit # K2R526D below. This link will take you to Dexter's website page for Kodiak brakes. Simply scroll down to the link for installation instructions where you will find all the updated torque specifications for these.
view full answer... - Are There Replacement Brake Pads for the Tie Down Engineering (TDE) 46304 Disc Brake CalipersI do have an option for you but we don't offer any replacement brake pads for the Tie Down Engineering (TDE) 46304 Caliper as the company is no longer in business. Therefore, our only option to you would be a full replacement for which I recommend the Kodiak Disc Brake Kit part # K2R35D if you have a 3,500 lb axle or the Kodiak Disc Brake Kit part # K2R526D is you have a 5,200 lb or 6,000 lb axle.
view full answer... - Inexpensive Corrosion Resistant Disc Trailer Brakes for Salt Water Use and a Boat TrailerThe best possible material for saltwater applications is going to be stainless steel but since cost is a factor stainless would not be the way you would want to go. The next best thing is going to be a brake kit with Dacromet finish like # K2R526D. The Dacromet has a 400 to 600 salt spray rating but it is always a good idea to spray them of with fresh water after use in salt water. This kit is designed to fit over idler hubs with a 6 on 5-1/2 bolt pattern and 15 inch or larger wheels...
view full answer... - Do Dexter and Kodiak Disc Brake Kits Use Same Mounting BracketsThe mounting brackets of the Kodiak kit like the # K2R526D and the Dexter kit part # K71-647-648 locate the caliper relative to the hub in a slightly different position as well as use different bolt hole dimensions. Because of this the two kits aren't compatible with each other. The Dexter is much more offset towards the axle than the Kodiak, but that doesn't necessarily mean one is better than the other. Both of these brands do things differently but have a great reputation as being very...
view full answer... - What Is Dimension Between Bolts On The Caliper On The Kodiak Disc Brake Kit, # K2R526DOn the Kodiak Disc Brake Kit, # K2R526D, the distance between the center of one bolt to the center of the other bolt on the caliper is 5-3/4 inches. You would need to measure the distance of the bolts on your 2003 Mastercraft Trailer to know if this caliper will fit on your trailer. This caliper is made to work with the mounting brackets in the Kodiak Disc Brake Kit, # K2R526D. The Kodiak Disc Brake Kit, # K2R526D, is for 5,200 lbs. to 6,000 lbs. trailers with 15 inch and larger wheels...
view full answer... - Brake Flange Mounting Bolt Recommendation for Kodiak Disk Brake Kit K2R526DThe brake flange mounting bolts are not included with the Kodiak Disc Brake Kit # K2R526D that you referenced. If you need bolts you would want the part # 7-5 for the bolt, part # 38LW for the washer and part # 38N for the nut. These aren't stainless, but they will still work fine. If you wanted to go with stainless you would have to source them at a hardware store.
view full answer... - What Wheel Studs Do I Need for Disc Brakes on Trailer with 225/75-15 Size TiresAccording to the information I could find, your 2012 Heartland North Trail 26RLSS uses 225/75-15 size tires which means they should fit a 1/2"-20 stud like what we see with the tire/wheel combo # AM32669. If you're using a disc brake kit like the Kodiak Kit # K2R526D which mounts to a pre-existing idler hub then you'll want to make sure it uses the 1/2" studs, like what we find with part # KH42655S. If you can give me some more details about what size studs your aluminum wheels should...
view full answer... - Disc brake Kit For EZ Loader Trailer With 5,300 lb Torsion AxlesThe Kodiak disc brake kit # K2R526D will fit your 2018 EZ loader trailer with a 5,300 lb axle. It uses a 5 bolt brake flange which is standard for axles 5.2K-7K. The slip on rotors will work with virtually any 6 on 5-1/2" idler hub. We generally recommend a hub like the # 8-213-5UC1-EZ to go with it. Your UFP hubs should be very similar to the Dexter brand.
view full answer... - Can Dico Model 10 Surge Coupler be Used with Kodiak Disc BrakesIf your Dico Model 10 surge coupler is designed for use with disc brakes then yes, it will work with Kodiak disc brakes # K2R526D. If your model 10 is designed for drum brakes then you can replace the master cylinder with # T4747100.
view full answer... - Can I Upgrade To Disc Brakes On My 2021 Grand Design Transcend Travel Trailer With 4400 Pound Axles?Due to the Dexter 4,400 pound axles using an uncommon bearing combination (inner bearing # L68149 (1.378" inner diameter) outer bearing # LM67048 (1.25" inner diameter)), you will be pretty limited on options. With that said, the only option we will have will be to replace the axle with something that uses a more common bearing combo. As an example, the Dexter 5,200 Pound Trailer Axle Beam with E-Z Lube Spindles # 6340624 will use the inner bearing # 25580 (1.750" inner diameter) and outer...
view full answer... - Will Kodiak Disc Brake Kit Replace UFP Brakes On 5,200 Lb Torsion AxleThe correct Kodiak Disc Brake Kit for a 5,200 lb axle is part # K2R526S for stainless or part # K2R526D for dacroment. In regards to compatibility, the brake mounting flange and spindle size are the only factors we can confirm. I don't foresee any issues but test fitting would be the only way to confirm. There are no exclusions for torsion axle trailers in general.
view full answer... - Determining Bolt Pattern for Kodiak Disc Brake Kit # K2R526DThe 5-1/2 bolt pattern is part of the 6 on 5-1/2 mounting pattern that the Kodiak Disc Brake Kit # K2R526D mounts on, this will be the same as your wheel's bolt pattern. To determine what mounting pattern you have I have a Help Article for you to look at, that I've attached. Basically you need to determine if you have a even or odd number of lugs/posts on your hub. If you have 6 then that's even, since it's even you will want to measure from center to center of the lug directly across...
view full answer...
- Replacement Brake Calipers for EZ Loader TIAB 27-31I contacted EZ Loader and got some information on your trailers. They could narrow down that you have 12 inch rotors, but they could be from two different manufacturers, Kodiak or UFP. If you have Kodiak rotors, then Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs, # KDBC225DAC, are the right replacement calipers. If they are the UFP, then I won't have the calipers you need if we stay with factory parts. If you do not have Kodiak and want to make the switch, I can help...
view full answer... - Is There an Exact Replacement For a Tie Down 46250 Brake Caliper or What Option is ThereFinding information on the Tie Down 46250 was not an easy task as it was discontinued awhile back. From what I could find, it looks like the calipers marked 46250 often times have to change the mounting bracket and rotor/hub in addition to the calipers. This means the DeeMaxx Disc Brake Caliper # DE86VR would not be an exact replacement and likely not compatible. Your best option is going to be a full replacement like the Kodiak Disc Brake Kit part # K2R35D if you have a 3,500 lb. axle...
view full answer...
- Can Idler Hub and Over-The-Hub Rotors Be Used to Convert to Hydraulic Brakes on CamperYou can certainly use idler hubs with slip on rotors to convert your 5th wheel camper to hydraulic disc brakes from electric drum brakes. As you noted, the benefit of this is being able to replace the rotors more easily down the road. This is nice if you find yourself in a situation where only either the hub or the rotor has been damaged, and only one of the two components need to be replaced. The Kodiak Disc Brake Kit # K2R526D that you referenced is a great choice for your camper. These...
view full answer... - How to Prevent Rust on Disc Brake RotorThe best thing you can do to help prevent rust on your # K2R526D rotor surface is to clean them before storing the trailer. It is likely you will still get a little surface rust which is a common occurrence and not something to be overly worried about. Once you drive the trailer and hit the brakes a few times the rust will be gone. The only way to completely prevent this would be to upgrade to stainless steel rotors like # KR12S
view full answer... - Recommended Disc Brake Kit For 5,200 Lb AxleWe do offer several disc brake kits for 5,200 lb axles. One of the disc brake kits I recommend is part # K2R526D. This is designed for axles up to 5,200-lb to 6,000-lb and has a 12 inch rotor with a 6 on 5-1/2 bolt pattern. This kit includes the rotors, calipers, mounting brackets and mounting bolts. This is designed for a 5 bolt brake mounting flange. I have attached a link to our product page for the kits we offer. I have also attached a couple links to helpful articles about disc...
view full answer... - Differences Between Combined Hub & Rotor and Separate Hub & Rotor BrakesThe only real difference between using an integrated hub/rotor combo and a separate hub and rotor combo is that if something happens to the rotor and or hub on the separate hub/rotor, you can just replace the damaged component and not the entire assembly. As long as the idler hub you have on your trailer now has a 6 on 5-1/2" bolt pattern, then I recommend using the Kodiak Disc Brake Kit part # K2R526D. If you already have the calipers and mounting brackets then you can use part # KR12D...
view full answer... - Recommended Idler Hubs Compatible with the Kodiak 12" Disc Brake KitThe Kodiak Disc Brake Kit part # K2R526D is compatible with pretty much any idler hub with a 6 on 5-1/2" bolt pattern therefore you won't have any issues with the CE Smith Trailer Idler Hub Assembly part # CE13711. I have attached an install video I did on the brake kit for you as well.
view full answer... - Are Kodiak Disc Brake Trailer Calipers Low Drag CalipersI checked Kodiak and the calipers of their trailer disc brake kits like the part # K2R526D are low drag calipers.
view full answer... - Will Dexter 5.2K Idler Hub Fit with Kodiak 12" Disc Brake KitYes, the Dexter Trailer Idler Hub Assembly # 8-213-5UC1-EZ is compatible with the Kodiak Disc Brake Kit # K2R526D. I actually don't think that the placement of your wheel/tire will be that much different than when you are using hub and drum assemblies. I went out to the warehouse and found that the idler hub measures 2.095" from the back of the hub to where the rotor will sit and the rotor is 0.3065" thick meaning that your wheel will mount about 2.4015" from where the back of the hub (or...
view full answer... - How To Transition A 2021 Grand Design Reflection 278BH To Electric Over Hydraulic Disc Brakes To switch over to electric over hydraulic disc brakes you'll need start by finding the bearing and grease seal combination for your trailer's axles so that we can find a compatible hub/rotor assembly. If you remove the hub and measure the spindle with a set of calipers # PTW80157 at points B, C, and D from the diagram below we can use these inner diameter measurements to determine a fit. From there we'll need to determine the correct length brake line kit to make the run from the front...
view full answer...
Do you have a question about this Trailer Brake?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Mike S
Installed by:
Jeff D
Installed by:
Conner L
Video Edited:
Jacob T
Video by:
Alan C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steve D.
8/8/2017
The brakes have been troublefree and make a huge improvement in highway and mountain driving