Hyundai Elantra Trailer Wiring

Select Vehicle Year

  
Trailer Wiring

Available Years for Hyundai Elantra Trailer Wiring


Trailer Wiring Harness

Make installing your trailer wiring harness as easy as possible with a custom fit wiring harness. Trailer wiring from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, and Hopkins eliminates or reduces the need to cut and splice wires. It also helps to protect your vehicle's sensitive electronics from mis-wired trailers.

Choose the year of your vehicle to the left to find a custom fit trailer wiring harness.




Wiring Adapter Fitguide



Trailer Connectors and Adapters



Wire and Wiring Accessories



Trailer Wiring Manufacturers



Search For Custom Fit Hyundai Elantra Accessories
Select A Category Below



Hyundai Elantra Custom Fit Vehicle Wiring Videos

Tekonsha T-One Vehicle Wiring Harness Installation - 2013 Hyundai Elantra

Hi, I'm Shane with etrailer.com. Today you're going to be taking a look at . I'm going to walk you through the installation on a Tekonsha T-1 vehicle wiring harness for your 2013 Hyundai Elantra. This is going to allow you to pull a trailer, maybe you have a cargo carrier that requires lighting. This is going to allow those items to receive light functions from your vehicle, so that you can safely pull them and so that everybody know what you're doing, whether that's turning, braking or driving at night.It's going to be both turn signals, your brake lights and your running lights. It's going to give you 2.1 amps per circuit for your stop and turn signals.



Best 2013 Hyundai Elantra Trailer Wiring Options

Speaker 1: Today, we're gonna be taking a look at the best custom-fit vehicle wiring for your 2013 Hyundai Elantra. Over here on your left, you're gonna have the Hopkins 00:00:06, and in the center, you're gonna have the CURT 00:00:15. And here on your right, you're gonna have a Tekonsha 00:00:15. Let's go over some of the differences between these three.We'll start with the KURT here. You can see the KURT is a simple plug-in. It's gonna plug directly into your taillight wiring.



Best 2012 Hyundai Elantra Trailer Wiring Options

Speaker 1: Today we're gonna be taking a look at the best custom fit vehicle wiring for you 2012 Honda Elantra. Over here on your left, you're gonna have the Hopkins. Here is the center, you're gonna have the Curt. And here on your right, you're gonna the Tekonsha. Let's go over some of the differences between these three.We'll start with the Curt here. You can see the Curt is a simple plug in.



Trailer Wiring Harness Installation - 2016 Hyundai Elantra

Today on our 2016 Hyundai Elantra we'll be installing a T-1 vehicle wiring harness for a 4 pole flat trailer connector. Part number 1 1 8 6 7 8. We're not using our trailer wiring, we can just reinstall the dust-cap that's included. Open our trunk back up. Lift our spare tire cover back up. Install the wiring down inside and replace it. It's tucked up to of the way.



Trailer Wiring Harness Installation - 2013 Hyundai Elantra

Today on our 2013 Hyundai Elantra, we're going to take a look at, and show you how to install, the CURT T-Connector Vehicle Wiring Harness, with the four pole flat trainer connector. Part number is C56126. As you can see, it's nice, out of the way. We don't see any wires hanging out or anything like that. But when we need it, simple as pulling that up, pulling our wire out. That's going to be able to set right over that threshold right there. That padding right there on that weatherstrip gives up plenty of room so we can just close our trunk up, just like that.



Trailer Wiring Harness Installation - 2012 Hyundai Elantra

Today on our 2012 Hyundai Elantra, we'll be installing the Curt T-Connector Vehicle Wiring Harness, with four-pull flat trailer connector, part number C56126. We'll go ahead and begin here, by opening up the trunk of the vehicle. Next, we'll need to remove this rear scuff panel. To do this, we'll need to remove three plastic fasteners. Two that have kind of wing nut style design, where you can simply unscrew them with just your hand, and the center location you'll need to use either a large flat-head screwdriver or a trim panel remover tool. Once we have these three fasteners out, we can go ahead and lift up the center scuff panel and set it out of the way.



Trailer Wiring Harness Installation - 2012 Hyundai Elantra

Today on our 2012 Hyundai Elantra well be installing the Tow Ready T1 connector, part number 118532. First to start off our install, well need to remove some interior trim panels and fasteners to gain access to the wiring behind the taillights. Well start with the spare tire cover. Well go ahead and remove it and set it out of our way to make the installation easier. Next well remove the rear threshold. The rear threshold has three fasteners securing it into positions, two cargo hooks and one pushpin fastener.



Trailer Wiring Harness Installation - 2006 Hyundai Elantra

Today we are going to install part number 119175 from Tow Ready and we are going to install this circuit protected tail light harness on to a 2006 Hyundai Elantra. To do our wiring we are going to have to get inside the trunk and we are going to have to tap in behind the tail lights on both sides. What we are going to do is go ahead and take off this panel behind the tail lights and this will give us access to the wire harness. These are the wires we are going to be connecting to. We are going to hide everything into the interior panel here so all of this is going to come loose or off and go all the way across and do the same thing to the passenger side. Lets take out the carpeting and we will work on this threshold right here. 00:48