These stylish wheel covers fit your vehicle that has 19-1/2", 10-lug wheels with 10 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.Features: Stylish wheel covers fit over your existing rims to enhance the look of your vehicle Low-profile design delivers a sleek look Stainless steel coating with mirror polish adds eye-catching shine Plastic construction Retention system holds each hubcap on center of wheel so that it doesn't wobble Mounting hardware included for installation Specs: Application: 10-lug wheelsWheel diameter: 19-1/2" Do not fit split rims Quantity: 4 wheel covers (2 front and 2 rear) Hand holes: 10 1-Year limited warranty
Replaces 1 mirror-polished stainless steel wheel cover on the front of your vehicle. Fits a 19-1/2", 10-lug wheel with 10 hand holes. Hardware included.Features: Replacement wheel cover fits over a wheel on the front of your vehicle Low-profile design delivers a sleek look 304 Stainless steel construction is sturdy and rustproof Mirror finish adds eye-catching shine Retention system holds hubcap on center of wheel so that it won't wobble Mounting hardware included for installation Specs: Application: 10-lug front wheelsWheel diameter: 19-1/2" Does not fit split rims Quantity: 1 wheel cover Hand holes: 10
This bearing and race kit has everything to replace the bearings on 1 wheel of your trailer axle rated for 3,500 lbs. Works with Lippert, Dexter, or AL-KO 3,500-lb axles with #84 spindle.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 6,000 lb trailer axle. Includes inner and outer bearings and races, seal, and cotter pin.
Hi Mark, welcome back! Based on your 2021 Tiffin Phaeton 37BH on a Freightliner chassis and not the PowerGlide, the most common chassis is the Freightliner XC chassis, and for that setup the confirmed anti sway bars are the Roadmaster rear bar part…
The Fan-Tastic Vent Roof Vent w/ 12V Fan - Reversible #FV801250 will fit in the same opening as your current vent as they are industry standard size. I recommend using the Installation Kit #344270KITW to install and seal your vent. You can run wires…
Hey Phil, thanks for reaching out. We do have replacement doors for the B and B water centers. I'll need to know the dimensions of the current door so we can match that up. There are a few different options and we want to be sure you get the…
Hey Bruce! The SoftStartRV Soft Start #SSR54FR is what you need for your 13K Btu Furrion Chill HE AC unit. This is a universal kit so while it won't be plug and play, it will still work with your Furrion. What's the driving force pushing you…
The horizontal center to center bolt distance is 3-7/8 inches, with the vertical being 3-3/4 inches as shown in the provided photo. I've linked to a product description for the Valterra waste valve.
The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.
We have just what you need! The replacement motor for your A-300 series Klauber slide out is the part #LC157511. The last 4 digits of the number you listed confirms that you have an A-300 series which is how I know this is the correct replacement.
In order to sync the Replacement Touchscreen Remote part #LC358601 with the multi-function pad on your 2015 Keystone Cougar 327RES you are going to want to complete the following: 1) To begin syncing the remote to the receiver, both the receiver and…
The four bolt pattern of the flange on the waste water valves is an industry standard so you don't really have to worry about measuring the bolt hole spacing. However, to address your specific question the bolt holes are spaced 3.73" apart…
Hey Volker, the closest option we have is the part #HP99ZR which has cut out dimensions of 22-7/16" wide x 15-3/16" tall x 19-1/4" deep. The biggest issue would be the depth being a bit more than what you listed. Is there additional…
Yes, the High Pointe Direct Replacement EM925AQR, which is part #HP59ZR on our site, will replace your existing microwave High Point model number EM925RYS.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 7,000 lb axle. Includes inner and outer bearings and races, double-lip grease seal, cotter pin, and EZ lube spindle washer.
When you want your RV to look right and feel ready for the miles ahead, this pre-mounted tire and OEM-used aluminum wheel combo gives you a clean replacement you can count on for the road.Durawall Protection: Reinforced sidewall helps resist cuts and punctures. Machined Black Aluminum: Rustproof Cobra wheel keeps your RV looking sharp. Long-Term Coverage: 5-year tire warranty plus roadside assistance. Features to know about Keep the Original Look of Your RV: Keystone OEM Cobra Wheel When you're replacing a tire and wheel on your camper, you want the new one to look like it belongs there.
This bearing and race kit has everything to replace the bearings on 1 wheel of your 5,200 lb to 6,000 lb trailer axle. Includes inner and outer bearings and races, seal, cotter pin, and washer for EZ lube spindle.
Ready for the road, this pre-mounted tire and wheel combo handles your gear with confidence and tracks straight on long hauls. Durable powder-coated wheel resists rust, and the low-profile tire design helps boost fuel efficiency.Highlights Trailer-Ready Tire and Wheel Combo: ST225/75R15 radial tire pre-mounted on a 15" nardo gray modular steel wheel with 6 on 5-1/2 bolt pattern. Load Range D Tire: Supports up to 2,540 lbs at 65 psi for dependable hauling. 6 on 5-1/2 Bolt Pattern: Fits a wide range of trailers with common hub sizes.
When you want your RV to look right and tow smoothly, this pre-mounted tire and OEM-used aluminum wheel combo gives you a clean replacement that's balanced and ready for the road.Keep the Original Look of Your RV: OEM-Used Machined Black Cobra Wheel When you're replacing a tire and wheel on your camper, having something that looks like it belongs there matters. This 14" x 5" Cobra aluminum wheel is used by RV manufacturers including Keystone.
For your trailer with disc brakes, this heavy-duty, 17-1/2" x 6-3/4" steel wheel has an 8 on 6-1/2 bolt pattern and a 4.76" pilot diameter. Hub-piloted wheel has a +0.19" offset and a corrosion-resistant powder coat finish.Features to know about Built for Heavy Loads and Highway Confidence: 6,005-lb Wheel Capacity When the haul is demanding, this wheel delivers solid strength. The Lionshead hub-piloted steel wheel is rated for 6,005 lbs of capacity and meets Department of Transportation standards, giving you peace of mind on long drives or heavy-duty use.
Ready for the road, this pre-mounted tire and wheel combo helps your trailer tow smoothly and consistently mile after mile. Durable powder-coated wheel resists rust, and radial tire design cuts heat buildup for longer tread life.Built for Daily Use: 13" x 4-1/2" Steel Wheel This common wheel size pairs well with small trailers and everyday hauling. It provides a practical foundation that works across a wide range of setups.
Filters
