Installation and Wiring of Trailer Roof Vent with 12V Reversible Fan
Updated 05/22/2018 | Published 05/21/2018
Products Featured in This Question
Question:
I want to replace the vent in my travel trailer with this product. The current vent has no motorized fan. Just a vent. This product should fit the footprint of the opening. How do I find more information about hooking up the wiring? It could probably be hooked up through the lighting. However, I want to be able to operate it when the ceiling lights in the trailer are off. My trailer is a 2017 Palomino Real-Lite 178S. Thanks.
asked by: Rebecca B
Helpful Expert Reply:
The Fan-Tastic Vent Roof Vent w/ 12V Fan - Reversible # FV801250 will fit in the same opening as your current vent as they are industry standard size. I recommend using the Installation Kit # 344270KITW to install and seal your vent.
You can run wires directly to your trailer battery or into the same circuit breaker as your lights using # 16-1-1. That will allow you to use your fan and have the lights off versus just splicing into the light power. The motor will draw 36 watts and the amperage will change with the fan speed. On low it will draw 1.86 amps, on medium 2.29 amps, and on high 3 amps.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: wheel simulator
- Search Results: pull out tray
- Shop: MORryde RV Generator Slide Out Tray - 15-3/4" x 16-5/8" - 100 Percent Extension - 250 lbs
- Shop: MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" - 100 Percent Extension - 300 lbs
- Shop: Rail Kit for Kwikee RV Cargo Slide Tray Assembly - 22" Long - 200 lbs
- Shop: MORryde RV Generator Slide Out Tray - 19-1/4" x 23" - 100 Percent Extension - 250 lbs
- Shop: MORryde RV Griddle Pull Out Tray - 22-1/2" x 20-1/2" - 100 Percent Extension - 100 lbs
- Shop: Ventline Roof Vent w/ 120V Fan - Manual Lift - 14-1/4" x 14-1/4" - White - Polar Trim
- Shop: Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke