16-1/2" Long x 1-3/8" tall. Waterproof identificationlight bar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware not included. 2-Wire design with 50" leads.Features: LED trailer light functions as an identification bar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable stainless-steel base Red lens over white LEDs Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 16-1/2" long x 1-3/8" wide x 1-5/8" thick Distance between mounting holes (center on center): 16-1/16" Diodes: 9 3 per light Power draw at 12.8V: 0.153 amps Wire length: 50" Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 15050R Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
This waterproof identificationlight bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. ... Features: LED trailer light functions as an identificationlight bar for trailers wider than 80" 3 Optronics AL91 series lights are replaceable (AL91RB - sold separately) Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LEDs Surface mounts on trailer - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 15-15/16" long x 1-1/2" tall x 1-5/8" thick Distance between mounting holes (center on center): 7-1/2" Diodes: 9 Power draw at 12.8V: 0.153 amps Wire length: 50" LIfetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
17" x 1-1/2" x 1-9/16". This LED light bar serves as a rear clearance identificationlight on trailers. Surface mount - hardware not included. P2 rated.Features: Trailer LED light bar serves as a rear clearance identificationlight 3 Rectangular LED red lights LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire P2 rated light produces a 90-degree beam pattern DOT compliant Specs: Dimensions: 17" long x 1-1/2" wide x 1-9/16" thick Distance between mounting holes (center on center): 16"
15-1/2" Long x 1" tall x 1/2" thick ID light bar. Waterproof LED identificationlight bar with integrated utility light for trailers. Polycarbonate lenses and base. Surface mount. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Waterproof trailer light kit with (3) 3/4" diameter lights that work as identificationlights when properly mounted on trailers over 80" wide. Recessed mount with included grommets. 29" Long insulated wiring harness. ... Features: Trailer light kit functions as rearidentificationlights for trailers over 80" wide Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lenses and housings Clear lenses over red LEDs Compatible with 12V DC systems Recessed mount with included black grommets Requires a 3/4" diameter hole for each light 2-Wire molded harness includes power lead and ground wire PC rated light produces a 180-degree beam pattern DOT compliant Specs: Application: trailers over 80" wide Quantity: 3 red lightsLight dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Wiring harness length: 29" Diodes per light: 1 Power draw at 12.8V: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light kit makes it ideal for use on trailers that may be submerged, like a boat trailer.
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identificationlight bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
We do offer a wide variety of replacement lights for trailer but since trailer manufacturers don't keep a record of what they use on trailers I would need some pictures of the lights you are wanting to replace along with some measurements so I…
I wouldn't worry about the trailer not having fenders. I've pulled a few enclosed trailers that were missing fenders and it didn't affect anything that I noticed. If you get a puddle or it starts raining the tires will fling water so it…
Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.
Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
17" Long x 1-3/8" tall x 1" deep. Waterproof identificationlight bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.Features: LED Trailer light functions as an identificationlight bar for trailers wider than 80" Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red lens over white LEDs Compatible with 12V DC systems Mounts to surface of trailer - hardware not included 2-Wire pigtail includes power lead and ground wire P2 rated Specs: Quantity: 1 identificationlight bar Dimensions: 17" long x 1-3/8" tall x 1" thick Distance between mounting holes (center on center): 16-1/8" Diodes: 3 Power draw at 12.8V: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
16-1/4" Long x 1-1/4" tall x 1" deep. Identificationlight bar is designed for trailers wider than 80". Mounts to surface of trailer - hardware not included. 2-Wire pigtail.This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
16" Long x 1-1/2" tall x 1-5/8" thick. Waterproof, incandescent identificationlight bar is designed for trucks and trailers. Durable polycarbonate housing and lens. Surface mount. 2-Wire pigtail with 50" leads. ... So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Haul your large boat trailer safely, with this 12-15/16" x 2", submersible, V-shaped identificationlight. When attached to the back of your trailer, this red light indicates to other drivers that your trailer is 80" or wider.Features: LED identificationlight improves road safety by alerting other drivers that your trailer is over 80" wide V-shaped light is designed to fit your boat trailer's rear, V-bend cross member Sealed, waterproof unit includes UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Red lens over red LEDs Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation 12V DC compatible Surface-mount installation - hardware not included Hardwires to trailer Meets or exceeds FMVSS 108 standards Assembled in the USA Specs: Dimensions: 12-15/16" long x 2" wide x 1/2" thick Distance between mounting holes: 9" Diodes: 3 Input voltage: 9V - 14V Power draw: 0.07 - 0.09 amps Wire length: 58" IP rating: 68 Limited lifetime warranty
14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identificationlight bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
14-1/4" Long x 1-3/16" tall. Waterproof identificationlight bar with 3 replaceable incandescent lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
17" Long x 1-3/8" tall x 1" deep. Waterproof identificationlight bar is designed for trailers wider than 80". Durable polycarbonate lens and housing. Surface mount to trailer. 2-Wire pigtail.This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
16-3/4" Long x 1-3/8" tall x 1-1/4" thick. Waterproof, incandescent identificationlight bar is designed for trucks and trailers. Durable steel base with white finish. Surface mount. 1-Wire design. P2 rated. (3) 194 bulbs.Features: Red light strip functions as identificationlight bar for trucks and trailers Light bar has three replaceable MC11RB lights attached to base Sealed, waterproof housing and lens unit Incandescent bulbs can be easily replaced Durable steel housing with white finish Red lens over incandescent bulbs Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds through mounting hardware P2 rated Specs: Dimensions: 16-3/4" long x 1-3/8" tall x 1-7/16" deep Distance between mounting holes (center on center): 6" Power draw at 12.8 volts: 1.0 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # LB1020R Grote # 49112 Peterson # 107-3R P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Waterproof trailer light kit with (3) 3/4" diameter lights that work as identificationlights when properly mounted on trailers over 80" wide. Recessed mount with included grommets. 29" Long insulated wiring harness. ... When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light. Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
14-1/4" Long x 1-3/16" tall. Submersible identificationlight bar with 3 replaceable incandescent lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Haul your large boat trailer safely, with this 12-15/16" x 2", submersible, V-shaped identificationlight. When attached to the back of your trailer, this red light indicates to other drivers that your trailer is 80" or wider.Features: LED identificationlight improves road safety by alerting other drivers that your trailer is over 80" wide V-shaped light is designed to fit your boat trailer's rear, V-bend cross member Sealed, waterproof unit includes UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Clear lens over red LEDs Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation 12V DC compatible Surface-mount installation - hardware not included Hardwires to trailer Meets or exceeds FMVSS 108 standards Assembled in the USA Specs: Dimensions: 12-15/16" long x 2" wide x 1/2" thick Distance between mounting holes: 9" Diodes: 3 Input voltage: 9V - 14V Power draw: 0.07 - 0.09 amps Wire length: 58" IP rating: 68 Limited lifetime warranty
15-9/16" L x 1-3/16" W x 1-5/16" D; Three separate lights on the base; lights have replaceable lenses and bulbs; surface mount on 6-1/8" centers; 1-wire; total of 3 incandescent bulbsFeatures: Red light strip functions as identificationlight bar for trailers more than 80" wide Light bar has three replaceable MC68RB lights attached to base Each separate light features a replaceable lens and easy-to-replace bulb (A193) White metal housing is sturdy and durable to withstand the environment Surface mounts on 6-1/8" centers Single-wire design includes lead wire and grounds through mounting hardware Dimensions: 15-9/16" L x 1-3/16" W x 1-5/16" D Power draw at 12.8 volts: 1.0 amp A three-lightidentificationlight bar for trailer applications more than 80" wide.
14-1/4" x 1-3/16" x 1-1/16". Waterproof identificationlight bar with 3-LED lights is designed for trailers wider than 80". Durable stainless steel base. Surface mount - hardware not included. 1-Wire design.Features: LED trailer light functions as an identificationlight bar for trailers wider than 80" Sealed, waterproof housing and lens units is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable stainless steel base resists corrosion and rust Red lens over white LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 14-1/4" long x 1-3/16" tall x 1-1/16" deep Distance between mounting holes (center on center): 8-1/2" Diodes: 6 Power draw at 12V: 0.11 amps Wire length: 60" Limited lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
14-1/4" Long x 1-1/8" wide x 7/8" deep; sealed, waterproof, 1-piece housing and lens; surface mount on 8-1/2" centers; 2-wire design; 3 red LEDs; red lens.Features: Red identificationlight for trailers more than 80" wide Long-lasting LEDs (light emitting diode) are great replacements for incandescent lights Multi-diode design optimizes light output No bulbs to replace - no brittle filaments More efficient - provide brighter light with less power Sealed, waterproof, 1-piece, molded plastic housing and durable lens Compact size is perfect for mounting in tight spaces Corrosion resistant 2-Wire design - includes lead wire for power and ground wire DOT compliant Meets FMVSS 108 requirements in any 360-degree position Specs: Shape: rectangular Dimensions: 14-1/4" long x 1-1/8" wide x 7/8" deep Diodes: 3 Power draw: 0.020 amps at 12.8 volts Installation: surface mount on 8-1/2" centers Lifetime warranty on LEDs
Keep the back of your trailer visible without adding lights that stick out against darker trim. The smoked lenses blend in nicely when parked, and the sealed construction is a good match for trailers that regularly see rain or water.This identification bar pairs three red LEDs with a smoke lens and black molded base, keeping your trailer or vehicle's darker look while still giving you a 3-light marker configuration.
16-5/8" x 1" x 1-7/16". Incandescent identificationlight bar is designed for trailers wider than 80". Durable powder-coated white base. Surface mount to trailer - hardware not included. 1-Wire design. (3) 194 bulbs.Features: Incandescent trailer light functions as a mini identificationlight bar for trailers over 80" wide 3 Peterson 107R lights are replaceable (422600 - sold separately) Durable powder-coated white base is corrosion resistant Red lens over incandescent bulb Compatible with 12V DC systems Surface mount to trailer - hardware not included Single wire design grounds through mounting hardware DOT compliant Specs: Dimensions: 16-5/8" long x 1" tall x 1-7/16" thick Distance between mounting holes (center on center): 16-1/8" Bulb type: 194/193 Number of bulbs: 3 1-Year limited warranty Manufacturer Cross Reference Light will work as an exact replacement for: Grote # 49112 Truck Lite # 1508R Optronics # MC99RB Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes.
Haul your large boat trailer safely, with these 1" diameter, submersible lights that act as an identificationlight system, which is designed to indicate to other drivers that your trailer is 80" or wider.Features: LED identificationlight kit improves road safety by alerting other drivers that your trailer is over 80" wide Sealed, waterproof units include durable, polycarbonate housings and UV-resistant lenses Military-grade construction of circuit boards Urethane potting offers better protection than common epoxy potting Red lenses over red LEDs Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation 12V DC compatible Recessed-mount installation - hardware not included Hardwires to trailer Meets or exceeds FMVSS 108 standards Assembled in the USA Specs: Quantity: 3 lights Individual light dimensions: 1" diameter x 7/8" thick Diodes: 1 per light Input voltage (per light): 9V - 14V Power draw (per light): 0.06 - 0.08 amps Wire length: 48" IP rated: 68 Limited lifetime warranty Sealed, Waterproof Trailer Lights The waterproof construction of these lights make them ideal for use on boat trailers because they often get submerged.
14-15/16" Long x 1-3/16" tall x 1" deep. Waterproof identificationlight bar with three 3/4" diameter red LEDs is designed for trailers wider than 80". Durable polycarbonate lens and housing. ... Features: Trailer light functions as an identificationlight bar for trailers wider than 80" Black molded base holds 3 red Uni-Lites Sonically sealed, waterproof housing and lens units are submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Mounts to surface of trailer - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Uni-Lites Specs: Overall dimensions: 14-15/16" long x 1-3/16" tall x 1" deep Individual light diameter: 3/4" Distance between mounting holes (center on center): 8-1/2" Wire lead length: 52" Diodes: 3 (1 per light) Power draw at 12.8V: 0.047 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Filters
