8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.
16" x 1-5/16" x 11/16". Low-profile LED trailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.
6-7/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs.
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.That gives you more reflective surface area than a glass bead, so the tape reflects up to 250% more light. The tape is perforated so it's easier to install. Optronics conspicuity tape allows other drivers to see your truck or trailer from a long distance away.
Hey Mark, welcome back! The Kenda wheel and tire part #AM31202 would be exactly what you are looking for. This is a radial tire in a size that is close enough to what you have now that it will fit without any clearance issues and is mounted on a…
I can help you determine which drawbar will be best for your vehicle. If you already have a hitch you will first want to make sure you get a compatible drawbar to that receiver size. I have linked all the custom hitch fits we show for your 2006…
Hey Greg! Where did your Stromberg Carlson Base Pad Extreme #SC53VR crack? The Andersen Trailer Jack Block #AN39VR is a good alternative. It has the same 6,000 lb capacity and the design is a little more basic/straightforward which makes it less…
Since you already know you need a Class I drawbar (which fit 1-1/4" receivers and have a capacity of 2,000 lbs), you'll just need to determine the rise or drop you need. To do this, you'll want to make sure your tow vehicle and trailer…
The DeeZee #DZ2045 will indeed fit your van. The steps are long enough to extend from the rear wheel well to just behind the driver's and passenger side door. If you wanted full-length running boards that extend all the way to the front of the…
Based on my research the 5x8 mesh floor trailers from Lowes come equipped with 4.80-12 size tires, which you can verify by checking the sidewall on the tire itself. For the next size up that will provide a larger profile and a higher weight capacity,…
Hello again Joel; I would recommend the Curt Air Ride 5th Wheel Pin Box #LC158778 over the Flex Air #LC369535. The pivoting head from the Flex Air causes too much movement so it actually isn't compatible with the Andersen hitch. Since the Air…
To determine if the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD #MR84VR will fit your trailer you'll need to first determine your trailer's bolt pattern. There will typically be a sticker (pictured…
Hello Frank, thanks for reaching out. Sounds like typical Ford for you lol. We do have a plug-in brake controller option for the 2025 Ford F-250. For that I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED67CR since it…
Unfortunately, Michael I cannot find any information on an AL-KO 7170 trailer hub. I would need for you to see what size bearings your hub uses and send me some images along with dimensions to identify the bolt pattern and any side brakes it may use…
Hey Chip, yes I agree the metal lid of the Ventline Ventadome part #V2110SP-24 is going to hold up the best over time which would mean you wouldn't have to worry about replacing the lid for a very long time. How old is the trailer?
Congrats on the new trailer! If you lock out the Turning Point pin box so it does not rotate you can use the B&W Companion 5th Wheel Trailer Hitch w/ Slider item #BWRVK3400-5W. You will have plenty of clearance when making turns with your short…
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires with the 3-wire pigtail.
2" Diameter waterproof LED utility light adds bright white light to an interior area. Miro-Flex design provides increased light output with a contemporary design. Flush mount with grommet (sold separately). Accepts standard 2-prong plug.
2-3/4" x 1-3/8" Rectangle. Low-profile LED trailer light with chrome-plated polycarbonate housing illuminates your license plate. Surface mount with foam gasket - hardware included. 2-Wire design.
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
2-7/8" x 2-1/8" Square. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. Surface mount - hardware not included. 2-Wire design. P2 rated.
Designed to combat ice and snow buildup, this heated trailer tail light enhances visibility and safety. Serves 3 functions: brake, tail, and turn. Recessed mount with grommet (sold separately). Weathertight connection. 4-5/16" Diameter.
8-1/16" x 2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers over 80" wide. Stud mount - includes hardware.
4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.
12-5/8" Long x 1" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile light fits in tight spaces. Smoked lens works great with black-out style on vehicles or trailers. 3-Wire pigtail. 9 LEDs. Red light.
2" Diameter round. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Durable polycarbonate housing. Flush mount with grommet (sold separately). Accepts standard 2-prong plug. P2 rated.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer light provides brake, tail, and turn signal functions. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design with 0.180 male bullets.
8-5/8" x 2-5/8" x 2-1/2". Trailer light illuminates your license plate. Durable ABS housing and polycarbonate lens. Surface mount with included bracket. 2-Wire pigtail.
15" x 1-3/8". Waterproof, LED utility light bar provides bright white light for your application. Ultra-thin design fits in tight spaces. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design.
Filters
