Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.
view full answer...Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…
view full answer...Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…
view full answer...The matching race for the bearing part #LM67048 that you referenced is the part #LM67010. This has an outer diameter of 2.328 inches. The race we have that has an outer diameter of 2.441 inch is the part #15245 which is designed for the bearing…
view full answer...I checked with Lippert and could not find any information on NV304664. Do you know the capacity of the axle? If it is a 7,000 pound axle then the likely inner bearing is #25580 and the outer bearing is #14125A. If a 2-1/4 inch seal diameter is needed…
view full answer...I would recommend Dexter Torflex axles the highest for torsion axles. And then put Al Ko and Lippert at about the same in quality. I was searching around online and the common consensus among the trailering forums is that the Dexter axles are…
view full answer...The #LC279688 is the direct replacement for your 145545 Equa-Flex. You do not want to use the Road Armor #LC696740 as a replacement. The Road Armor dimensions are quite different and will likely throw off other suspensions components. You also…
view full answer...To improve your trailers rough ride and absorb road shock I would start by replacing your trailers equalizers with a shock absorbing equalizer system. The Equa-Flex Cushioned Equalizers part #LC279687 is designed for tandem axle trailers with…
view full answer...I can help you figure out how to determine the best option for a wet bolt/shackle upgrade kit, though in order to determine the correct one you will need to take a quick measurement of the shackle straps on your Jayco Jay Flight. The reason for that…
view full answer...The torque specs for a 1/2" trailer suspension u-bolt like the CE Smith U-Bolt Kit part #CE23003 is between 45 ft/lbs - 70 ft/lbs.
view full answer...Your 5200-lb Lippert axle 121066 uses inner bearing #25580, outer bearing #LM67048 and grease seal #GS-2250DL. For all of these you can use kit #BK3-300. I also recommend bearing packer tool #ALL647646 for a cleaner method of packing the new bearings…
view full answer...Installing brass bushings of the proper inner and outer diameter and length is possible. In my experience brass bushings do not last any longer than nylon bushings and they are much harder to find in the correct size. At this time we do not carry…
view full answer...Related Searches
Filter Your Search
Contact and Help