Availability of Bearing Race to Match Bearing Number LM67048
Updated 01/29/2018 | Published 01/27/2018
Products Featured in This Question
Question:
I have a hub that has an inner ID of 2.4409, I have an LM67048 bearing. What race will fit that bearing and have an OD of 2.4409?
asked by: John
0
Expert Reply:
The matching race for the bearing part # LM67048 that you referenced is the part # LM67010. This has an outer diameter of 2.328 inches.
The race we have that has an outer diameter of 2.441 inch is the part # 15245 which is designed for the bearing # 15123. The # 15123 happens to have an inner diameter of 1.25 inch like the # LM67048 that you mentioned as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.25 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Looking For Brake Assemblies And Hubs For Dexter 4,400 lb EZ-Lube Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Parts for Dexter Motorhome Axle 8-133
- Q&A: Will the 18K Furrion Chill Cube w/ Heat Pump Replace a 13.5k BTU System?
- Q&A: Will Ultra Fab Fifth Wheel King Pin Tripod UF19-950600 Work with Grand Design Reflection 303RLS
- Q&A: Can Grease Be Cleaned Off Of A Brake Magnet And Brake Assembly?
- Q&A: Replacement Bearing Kit for a 4400 Lbs Dexter Axle
- Q&A: Replacements For Hadco Trailer Axle With Hadco 3109 Hubs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)