Identifying the Bearings and Seals on a Lippert Trailer Axle

Updated 05/28/2015 | Published 05/26/2015

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2

(634)

$328.45

Replacement Trailer Hub Bearing - 14125A

(138)

$16.04

Replacement Trailer Hub Bearing - 25580

(2141)

$16.89

Replacement Trailer Hub Bearing - L44649

(2141)

$22.34

Replacement Trailer Hub Bearing - L68149

(2141)

$17.06

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

(2754)

$6.23

Grease Seals 10-36 (pair)

(2544)

$8.46

Grease Seal - Double Lip - 2.125" ID - 3.376" OD - Qty 2

(277)

$7.99

Question:

I have a lippert axle assembly, NV304664 Can you give me information on inner and outter bearing sizes? also seal size? part numbers? lastly does dexter make a replacement hub to fit this axle? part number? A Lot of info but thanks in advance for any help.

asked by: Chris

Expert Reply:

I checked with Lippert and could not find any information on NV304664. Do you know the capacity of the axle? If it is a 7,000 pound axle then the likely inner bearing is # 25580 and the outer bearing is # 14125A. If a 2-1/4 inch seal diameter is needed it is a 10-36 seal, # RG06-070. Or it could also be a 2-1/8 inch diameter seal # RG06-090.

If it is a 3,500 pound axle it likely uses inner bearing # L68149 and outer bearing # L44649 and a 10-19 seal # RG06-050.

To determine which hubs will fit I really need to know the inner and outer bearing numbers stamped on the sides of the bearings. If the bearings are not available you would need to measure the spindle where the seal and bearings ride using dial or digital calipers. I have included a picture that shows where to measure.