The Triple Lift jack adapts to multiple vehicles, ATVs, UTVs, and motorcycles with its ability to remove the lift saddle. The locking safety bar holds the jack in place once raised, removing the need for jack stands.Using the Triple Lift Jack The Triple Lift floorjack is a 3-in-1 jack that converts from a floorjack to an ATV jack and also to a jack stand. The removable round lifting saddle is perfect for raising vehicles.
Attach these sturdy aluminum brackets to the floor of your trailer to provide a simple, secure place for your hydraulic floorjack to rest.Features: 2 Sturdy brackets hold your floorjack in place to keep it from rolling around your trailer during transit Jack wheels sit in U-holds on brackets Durable, lightweight aluminum construction is machine finished Limitless mounting options Position brackets as close together or far apart as necessary to fit your jack Drilling required Each bracket measures 16" long x 2" wide x 2-1/2" tall
Get set up fast and work with confidence. This 2-ton trolley jack and ratcheting jack stands combo rolls into place on swivel casters, lifts to 13", and locks between 10-3/8"-16-3/8" for routine service at home.Features: 2-Ton trolley jack and jack stands combo - 4,000-lb capacity Steel lifting arm with tough enamel finish Swivel casters for easy positioning Lightweight design for fast placement Ratcheting jack stands with 10 lock-safe settings Jack stand height range: 10-3/8" to 16-3/8" Great for cars and light-duty trucks 1-year warranty Specs: Capacity: 2 tons Jack low height: 5-1/8" Jack maximum height: 13" Jack lift range: 7-7/8" Jack stand adjustment range: 10-3/8" to 16-3/8" Warranty: 1 year
If you off-road but space is at a premium, the Tallboy is a compact bottle jack that can still create some serious lift. The large base plate gives you a solid foundation on the trail. It packs away to about one cubic foot when stored.Once the vehicle is raised, the Power Mountain Tallboy jack stand (sold separately) can take over the support job. It adjusts from 10-13/16" to 28-3/4" and supports up to 6 tons, letting you secure the raised load and free up your Tallboy jack for the next lifting position.
Kick the crud off your boots and level out your trailer! This kit pairs a Flap Jack stabilizing block with a shoe scraper, both packed neatly in one carry case. It's the clean, compact combo your campsite (and floors) will thank you for.Strong & Stable: Jack block supports up to 6,000 lbs with its durable plastic construction. Ready in Seconds: Flap Jack snaps together quickly with built-in magnets - no tools needed.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. ... In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping. Trailer and Camper Jack Lift Every jack offers a certain amount of lift or travel.
Hey Donny! Do you know what bearings are in that hub? It looks like that is a Dexter 3k hub with #L44649 outer and #LM67048 inner bearings so those parts designed around a #84 spindle on a 3,500 lb axle aren't going to work. Assuming that matches…
Hello Anthony, Look no further my friend, we have exactly what you are looking for. The Dexter Trailer Hub and Drum Assembly for 3,000-lb E-Z Lube Axles - 10" Diameter #DX62KR uses outer bearing L44649, and inner bearing LM67048, and has the 5…
Hey Greg! The correct Roadmaster Comfort Ride Leaf Spring Suspension Kit for your 2026 Alliance Avenue 32RLS is the #RM49NQ. This includes the shock kit as well. Then for disc brakes I recommend the Hydrastar Disc Brake Kit w/ Actuator for Tandem…
Hello Jason, thanks for reaching out. Yes, the Kenda Karrier KR53 ST205/75R15 tire with 15" black aluminum wheel #KE58JV does come balanced from the factory. Trailer tire and wheel assemblies are balanced by matching the tire’s high and low…
Hey Wayne, thanks for reaching out and providing all of the details! It looks like they got you setup with the wrong size Gen-Y Executive for your 2025 Alliance Avenue 32 RL. According to the chart that Gen-Y made on how to select the correct pin…
Hello Will, Looking to upsize your wheels and tires on your R-Pod? Always a great idea! Your current 205/75R14 tires are about 26.1" in diameter and 8.1" wide. We don’t carry the 205/85R15 size, which suggests it's not very common. A…
We have exactly what you're needing with the Dexter Trailer Hub and Drum Assembly for 3,000-lb E-Z Lube Axles #DX62KR. This is the same exact hub and drum assembly that you have - we just use a different part number. The pricing can be found on…
Thanks for reaching out, Nick! I'm not 100% sure what your bolt pattern is so I'll include a few different options. Some of the numbers you gave are OEM number so based off that I THINK your bolt pattern is a 5 on 4-1/2. You will want to…
Hey Clark, thanks for reaching out. The 2" OD A-frame jacks are pretty uncommon these days. Right now, we carry only one jack with a 2" OD tube, the A-Frame Trailer Jack #DL22530. The problem is, when this jack is fully retracted, the tube…
Hey Tomas, the Kenda Karrier ST205/75R15 Trailer Tire with Black Mod Wheel #AM32424 that you referenced would be an excellent option if this is the current size you have. It's a Load Range D tire on a black mod wheel like you mentioned as well.…
Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…
Replaces the jack leg for your Bigfoot 8K hydraulic jacks.Features: Replaces the jack leg for your Bigfoot 8K hydraulic jacks Works with all 8K square leg Bigfoot hydraulic jacks Includes jack leg and foot Cylinder and pump not included Made in the USA
Replaces the left jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the left jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg with foot Cylinder and pump not included Made in the USA
Replaces the right jack leg for your Bigfoot 12K hydraulic jacks.Features: Replaces the right jack leg for your Bigfoot 12K hydraulic jacks Works with all 12K square leg Bigfoot hydraulic jacks Includes jack leg - foot, cylinder, and pump not included Made in the USA Specs: Footplate dimensions: 10" long x 10" wide Mounting bracket dimensions: 4" long x 7-1/2" wide
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. ... Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
The hydraulic bottle jack lifts, holds, and locks vehicles in place without jack stands. Properly fitting unibody framed vehicles, the Unijack is perfect for cars, crossovers, and small SUVs and trucks. 21" Lift range with 3 ton capacity.After you have the vehicle lifted to the desired height, the jack will automatically lock into place. The Unijack will then double as a jack stand to support the lift. To unlock the jack, simply turn the lever at the base of the piston counterclockwise and the hydraulics will slowly move in a downward motion.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 5,000 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 5,000 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. Drop Leg Adds Reach: Extends up to 4-1/2" to reduce jack travel during setup. Protected for Weather: Weatherproof buttons, crank cover, canvas jack cover, and black powder coat help protect the jack.
Use your drill to raise and lower your trailer, then check tongue weight before you tow. This kit pairs a 2,000 lb A-frame jack with a jack foot tongue weight scale so you can adjust cargo and verify the load during setup.Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale. Adjust Cargo Before You Tow: Check the reading, move cargo, and check again while the trailer is still supported by the jack. 14" Lift: Manual A-frame jack lifts trailer tongue weight through the hitching and unhitching process.
Hook up, check tongue weight, and get on the road with fewer steps. This kit pairs a 3,500 lb electric trailer jack with a jack foot tongue weight scale, letting you lift your trailer and verify the load during the same hitching process.Highlights Push Button Lifting: 3,500 lb electric jack raises and lowers your trailer through your vehicle's 7-way connection. Check Tongue Weight While You Load: Jack foot scale reads up to 2,000 lbs in 50 lb increments without setting up a separate scale.
Perfect for campers, RV travelers, and anyone using a trailer, these jacks make life easier and more enjoyable. They're designed with comfort and convenience in mind, helping you save time and energy for what matters most - your journey.Power Connection: Wires directly to 12V power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Specs: Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Lift capacity: 5,000 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Perfect for campers, RV travelers, and trailer users, these jacks make adventures easier and more enjoyable. Designed for convenience and reliability, they save time and energy, so you can focus on what truly matters - your journey.Power Connection: Wires directly to 12V power source Automatic Reset, No Hassle: The 20A automatic reset relay fuse protects the jacks motor from overloads or short circuits and resets itself automatically, no need for spares or replacements Nighttime Convenience: LED courtesy light on front of jack makes nighttime setup simple Protective Cover: Canvas cover shields your jack from the suns harmful rays and harsh weather Emergency Backup: Manual crank included for peace of mind when needed Moisture Protection: Rubber cover over the crank opening keeps out moisture and the elements Durable Finish: Tough black powder coat finish resists rust and corrosion Warranty: Limited lifetime warranty Specs: Lift: 18" Drop leg adjustment: 4-1/2" Total adjustment: 22-1/2" Lift capacity: 3,500 lbs Dimensions: Overall height: 29-1/2" Mounting plate height: 8-7/8" Footplate diameter: 5-1/2" Outer tube diameter: 2-1/4" Motor voltage: 12 volts 2-Year warranty
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.Features: Utility jack lets you raise and lower your A-frame trailer Sidewind handle has zinc finish for attractive look and rust resistance Black powder coat finish resists corrosion External gearbox is easily accessible Effortless greasing with built-in grease zerk Footplate or caster sold separately Specs: Bracket height (from bottom of inner tube to bottom of bracket): 8-3/8" Retracted 24" Extended Lift: 15-5/8" Clearance: 15" from bottom of bracket to top of jack Outer tube diameter: 2-1/4" Inner tube diameter: 2" Handle radius: 8" Lift capacity: 3,000 lbs Support capacity: 5,000 lbs 1-Year warranty
... Heavy-duty jack screw can lift up to 5 tons.But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity. Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. 15-3/8" of lift plus 13-3/4" of drop leg travel. ... In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
Weld-on, pipe-mount swivel jack pivots up for travel. Square design provides solid side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". ... Features: Utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Tubular swivel design lets you twist jack up for storage, down for use Pull pin with clip holds jack in place Lanyard connects pin to jack so it won't get lost Square jack provides more side-load capacity than round-tube jacks Belly band welded to the outer tube provides extra strength Sidewind handle has zinc finish for attractive look and rust resistance Drop leg allows for increased lift and saves time when raising or lowering Black painted outer tube Zinc finished inner tube and footplate for corrosion resistance Welded-on footplate minimizes sinking in soft ground Effortless greasing with built-in grease zerk Weld-on installation with included female pipe mount Specs: Jack height (from bottom of foot to center of pipe mount): 14-1/2" Retracted 29-1/2" Extended Lift: 15" Drop leg adjustment: 13-1/2" Total adjustment: 28-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000 lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 8-1/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty 25K capacity, 2-speed jack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Just make sure your jack's rated for at least that much. It's fine to go bigger, as a higher-capacity jack often makes lifting easier. Important 7-Way Power Note for Some Ford Trucks This jack draws power through your vehicle's 7-way connector, and that setup may not work with many Ford F-150 trucks from 2015 and newer that use a smart 7-way.
Your arm stalls mid-crank trying to lift a loaded boat trailer at the ramp. Been there. This 1,500 lb aluminum swivel jack accepts a 3/4" socket so a drill does the lifting. The wheel rolls the trailer into place and holds up to saltwater use.Fold down the sidewind handle and use your drill with the included 19mm socket to raise or lower the jack. If the drill isn't nearby, flip the handle back up and crank it manually. 1,500 lbs of Lifting Capacity With a 1,500-lb maximum capacity and 12" of travel, this jack handles the tongue weight of boat trailers during hookup and storage.
Filters
