Powerbuilt Triple Lift Jack w/ Locking Safety Bar - 17-1/2" Lift - 2 Tons

Part Number: ALL620422

$393.72

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

powerbuilt automotive tools jacks and jack stands all620422

powerbuilt automotive tools jacks and jack stands

powerbuilt automotive tools floor jack triple lift w/ locking safety bar - 17-1/2 inch 2 tons

powerbuilt automotive tools floor jack jacks and stands

powerbuilt automotive tools floor jack all620422

Show All (33) Product Images

Show Fewer Product Images

In Use/Installed

0 automotive tools powerbuilt floor jack jacks and stands in use

0 automotive tools powerbuilt jacks and jack stands all620422

0 automotive tools powerbuilt jacks and jack stands in use

0 automotive tools powerbuilt floor jack triple lift w/ locking safety bar - 17-1/2 inch 2 tons

Show All (4) In Use/Installed

Show Fewer In Use/Installed

Videos

Powerbuilt Triple Lift Jack w/ Locking Safety Bar Feature Review

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

The Triple Lift jack adapts to multiple vehicles, ATVs, UTVs, and motorcycles with its ability to remove the lift saddle. The locking safety bar holds the jack in place once raised, removing the need for jack stands. 1-800-940-8924 to order Powerbuilt automotive tools part number ALL620422 or order online at etrailer.com. Free expert support on all Powerbuilt products. Great prices and Fastest Shipping for Powerbuilt Triple Lift Jack w/ Locking Safety Bar - 17-1/2" Lift - 2 Tons. Automotive Tools reviews from real customers.

All Info
Reviews (1)
Q & A (0)
Related Parts
Photos

Powerbuilt Automotive Tools - ALL620422

Features:

Perfect for vehicle, ATV, UTV, and motorcycle maintenance
Raises, lowers, and stabilizes multiple vehicle types and frames
Removable lift saddle and padded lift rails
- Allows the jack to convert from a floor jack to an ATV jack

Safety bar locks into place for security
- Removes the need for jack stands

Ball bearing swivel casters make it easy to maneuver
Built-in tie-down loops to secure your motorcycle or ATV while in the lifted position
Wide base and wheels provide more stability for lifting loads safely
Meets ANSI standards

Specs:

Weight capacity: 2 tons
Lift: 5-1/4" - 17-1/2"
1-Year warranty

Note: This jack is designed to lift and stabilize 2 tons and should not be used to lift over that weight.

Using the Triple Lift Jack

The Triple Lift floor jack is a 3-in-1 jack that converts from a floor jack to an ATV jack and also to a jack stand. The removable round lifting saddle is perfect for raising vehicles. By removing the round lifting saddle you can change the purpose of the jack to an ATV, UTV, or motorcycle jack. The padded side saddles allow you to lift your gear safely. Once in the upright position, you can turn this jack into a jack stand by inserting the sliding lock bar and lowering the Triple Lift jack to rest on the slide bar.

620422 Alltrade Tools Powerbuilt Triplelift Garage Jack w/ Locking Safety Handle - 4,000 Lbs

4.0

1 reviews

5 Stars		(0)
4 Stars		(1)
3 Stars		(0)
2 Stars		(0)
1 Star		(0)

by: Benjamin 08/20/2018 One Year Later

Great jack, does everything as advertised. Though the one I received has a slight twist to the platform (not really an issue). Very stable. Used to remove and install school bus transmissions and DEF tanks. Will be ordering another one for my other garage. Thank you for carrying this product. Definitely recommend to others.

true

See what our Experts say about this Powerbuilt Automotive Tools

Do you have a question about this Automotive Tool?

How to Lift Class B Motorhome Off Ground to Protect Tires and Suspension for Full-Time Occupancy
Lifting your parked RV will help protect your tires from flat spots but stabilizer jacks like # UF48-979002 or # TJ01RT-HD are not suitable since they are not designed to handle the entire weight of the RV, only to support/stabilize a portion of it. A better solution is the TrailerLegs Tire Saver Stands # 326-TRLLG-4 which support the RV by the axles. The stands take all load off the tires which will prevent bends to the steel belts; bending of the belts is non-reversible. The stands will...
view full answer...
How Does Oil Get Added to Powerbuilt Triple Lift Jack ALL620422
I spoke with my contact at PowerBuilt and they informed me the following process to add oil if needed. There is a fill hole directly on top of the pump unit underneath the yolk and the lift arm. The easiest way to access this is to pump up the arm slightly and pull the handle down and you will see a screw cap with a phillips connection. We usually do not recommend end users to do this, but if they know what they are doing and are not disassembling the jack unit I do not see a problem....
view full answer...
Where Is Powerbuilt Tools Manufactured
Powerbuilt Tools, the manufacturer of tools like the Triple Lift Jack w/ Locking Safety Bar # ALL620422 is located and operated in Cypress, CA; Where for over 40 years they've produced consistent quality, performance, and value in their craftsmanship.
view full answer...
How to Release Tension on Powerbuilt Triple Lift Jack w/ Locking Safety Bar
To help with trapped air in your Powerbuilt Triple Lift Jack w/ Locking Safety Bar # ALL620422 you will need to pump it halfway up and then a few more pumps - this should get all of the air to the top. Sometimes the air can move around during shipping or if the jack sits for a long time. The release valve you're talking about is the valve you turn to lower the jack with the handle.
view full answer...
Powerbuilt Triple Lift Jack # ALL620422 Weight and Dimensions
The Powerbuilt Triple Lift Jack part # ALL620422 weighs 85 lbs. The dimensions are 27 inches by 17 inches by 9 inches. I attached a review video for more info on the jack as well.
view full answer...
Ramp Or Jack Solution For Belly Pan Maintenance / Oil Change On Skid Steer
Hey Bob! The Valterra StayPut Tandem Trailer Tire Changing Ramp # VAL68MB does have a weight limit of 15,000 lbs which should be plenty to lift one end of your skid steer up for an oil change, but it's really only designed to be a tire change ramp for dual axle trailers. So you would be on your own with trying to use it with a skid steer since it isn't designed for that use case. I really wouldn't recommend it. You may have better luck with a heavy duty jack like Powerbuilt Triple Lift...
view full answer...
Jack Recommendation for Changing Tires on a Mean Bean Trailer
For a great option, I recommend the PowerBuilt Triple Lift Jack # ALL620422. This jack has a weight capacity of 4,000 pounds, which is perfect for your Mean Bean Trailer. It is fast and easy because it has wheels to allow you to get the lift into position. With this jack, you can avoid the axle by placing the jack on a safe location on your frame. As far as height, you will be able to lift the tires 3" off the ground. I went ahead and attached a video for you to check out.
view full answer...

Do you have a question about this Automotive Tool?

Info for this part was:

Expert Research:

Jameson C

Video Edited:

Dustin K

Installed by:

Hayden R

Updated by:

Wilson B

Updated by:

Erin H

Written by:

Kristen H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.