Tow-Rax Floor Jack Mount - Aluminum

Video Transcript for Tow-Rax Floor Jack Mount Review

Today we're going to be taking a look at the Tow-Rax Aluminum Floor Jack Mount, part number TWSPJSTAL. The Tow-Rax floor jack mount does a great job of holding our jacks in place no matter what the size of them are. You'll notice here in the front we have two very large cups. These are designed to hold the front wheels of the jack. Down the side we've got a nice large piece of angled aluminum. This is going to allow us to drill our holes wherever we might need them anywhere along the strip to get it mounted onto our floor. As you can see, we've drilled two holes in ours.

We've just used a number 8 self-tapping screw to go into our floor here. That gives us a nice sturdy hold. The Tow-Rax Floor Jack Mount does a great job of holding our jack in place, but if you do want some extra security you can see we've got a hole located on each side. That will allows us to bring a strap or a rope or a cable, something we might want to bring over the top to hold our jack down. We're going to have an overall length on each piece of about 16". Our width is going to be about 2".

Our tallest point, as you can probably see, going to be right up here at that front edge. That measure about 2-1/2". Loading up the jack's a pretty simple process as you might have guessed. We're just going to roll it forward, place our front wheels down and in, and as you can see, a nice secure fit. With our jack all loaded up we're ready to hit the road. That will complete today's look at the Tow-Rax Aluminum Floor Jack Mount, part number TWSPJSTAL.

.