Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.
Round trailer axle beam measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Straight trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 17-1/2" wheels. EZ-Lube spindles for simple lubrication.
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware.
Hi Michael! The 2025 Ram 1500 now uses the same plug as the Jeep Grand Cherokee (and a bunch of other Mopar vehicles), so you will want the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #TK93VR. This will plug right into that port…
Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…
I must recommend that you replace the hub/drum as well when changing the size of your braking assemblies because the surface area on the old drums may not line up with the new braking assemblies which is why I recommend replacing both at the same…
I do have a great option for you, however we do not have any standard 3,500 pound round tube axles available that match the dimensions you provided. For an exact replacement your best option will be to go through a local trailer shop or the…
If you wanted to stick with Lippert, you will want the Pre-Greased Trailer Hub and Drum Assembly #LC53UD. This is a direct Lippert replacement for 7,000 pound axles and the V000209130 number you found confirmed it. This number indicates that your…
Hey Dave, since you have 7k axles I would recommend just going with the 7k tandem Roadmaster Comfort Ride part #RM-2460-2570 as it's the correct rating and has correct size components. But if you wanted to go with the 8k kit part #RM-2460-2580…
Hi Scott; the DeeZee Custom-Fit Truck Bed Mat #DZ88GJ is specifically designed to fit the 6-1/2' bed on your 2025 Ram 1500. No trimming or any kind of alteration will be required to install it in your truck bed.
Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…
You can switch from a 5-Leaf #e74SR to a 7-Leaf #e37SR as long as you are replacing all your leaf springs. Do note the 7-leaf springs are going to be roughly 3/4" taller so you may also need taller U-Bolts like the #MR66ZR which are 7-3/4"…
Slipper spring setups, like parts #e74SR and #APT6SE for 7K axles, do have different hanger sizes so what you'll want to do is cut off the older hangers and do some mock-ups of your new system before installing the hangers. Start off by mocking…
The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…
The only tank equipped RV water heat option we currently offer is the Dometic RV Water Heater part #DMC74FR which is a 120 volt unit with 6 gallon tank and gas/electric operation. In regards to installation, this must be performed by a qualified…
Trailer axle measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Trailer axle measures 94" from hub-face-to-hub-face and 79" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
This hub-and-drum assembly fits 5,200-lb to 7,000-lb axles with #42 spindles. Compatible with electric or hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Get more ground clearance and a smoother ride. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, drop spindle lowers deck height for easy loading. Fits any trailer frame width. Includes inner (L68149) and outer (L44649) bearings.
Trailer axle measures 57-1/2" from hub face to hub face and 46-1/2" from spring center to spring center. Includes idler hubs with bearings, races, and seals. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.
Trailer axle measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
Get more clearance and a smoother ride when towing with Axle-Less trailer suspension. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, standard-height spindle keeps your deck height the same. Fits any trailer frame width.
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center.
Trailer axle measures 86-1/2" from hub-face-to-hub-face and 71-1/2" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and hardware. Easy Grease spindles for simple lubrication.
Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. E-Z Lube spindles for simple lubrication.
Get more ground clearance and a smoother ride when towing with Axle-Less trailer suspension. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" drop spindle lowers deck height for easy loading. Fits any trailer frame width.
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 5,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Trailer axle measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.
Filters
