Hey JT! Sorry to hear about your trouble with the leaf springs. Hopefully there wasn't a lot of damage and everyone stayed safe. From what I have found the 26E-3500 is the same as the Dexter 072-027-00. This is the 6-Leaf Double-Eye Spring for…
Hey Sandra, thanks for the information. To replace the foot plate on your Lippert Jack 359278 you'll want the Replacement Foot Plate item #LC359344. This foot pad measures 10-1/2" in diameter and is sold individually. What happened to your…
Hello John, thanks for reaching out. For the wet bolts you can measure the overall length or the length not including the head. Honestly when replacing this stuff, the bolts are going to be a standard length and diameter. Typically I would not even…
Hey Brian, that's a great call. It is highly recommended to replace your U-bolts after you take them off for any reason. The nuts are only meant to be torqued down once. The longest U-bolts we have for a 3" diameter 7,000 lbs axle are the…
Hi Michael! The 2025 Ram 1500 now uses the same plug as the Jeep Grand Cherokee (and a bunch of other Mopar vehicles), so you will want the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #TK93VR. This will plug right into that port…
Hey Robert. The side bolts with the grease fittings should be tight on the Dexter DX7.5 Drop-N-Go Brake Actuator item #099-175-20. They're not holding the actuator on but you don't want the nuts backing themselves off. What kind of trailer do…
Hey Dave, since you have 7k axles I would recommend just going with the 7k tandem Roadmaster Comfort Ride part #RM-2460-2570 as it's the correct rating and has correct size components. But if you wanted to go with the 8k kit part #RM-2460-2580…
We do sell round u-bolts used to secure leaf springs to the axle, the correct ones for you will be based on the size of the axle. The Dexter Trailer Axle part #7359765-I for example has a 3,500 lb weight capacity so it is 2-3/8" diameter and a…
Hey Andreas, I do not see an issue with the Roadmaster Comfort Ride #RM-2460-2580 working on your trailer. It is going to give you the upgraded support with better rated springs, and work well on your 3" axles. With these being better rated than…
Hey Victor! The 8-247 is enough to identify what is on your 2006 Carmate trailer. Those are 3,500 lb axles, so you can replace the hub and drum assembly with the Easy Grease Trailer Hub and Drum Assembly #AKHD-545-35-EZ-K. If you prefer the Dexter…
We actually do not carry torsion axles here at etrailer. We deal with round tube leaf spring axles. We do deal with axle-less suspension which is a type of torsion axle. For a 3,500 lb axle we have the #ASR3500S05. This is a standard duty, 3,500 lb…
According to Solara (Lippert), the correct number of turns to set the proper tension of their slide toppers like #LCV000163285 is between 12 to 16 turns, so I'd consider 14 to be a pretty good happy medium.
Filters
