Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4".Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).How to Determine the Support Capacity You Need in Your LandingGearLandinggear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs.
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).How to Determine the Support Capacity You Need in Your LandingGearLandinggear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs.
Just the bones - replacement setup comes with everything but the electrical. Measures 15-1/2" between weld stops. 16" of drop leg makes up almost half of the total lift. Get your 5th wheel back into action!How to Determine the Support Capacity You Need in Your LandingGearLandinggear stabilizes about 25% of your trailer's total weight when it's loaded with cargo. For example, a 14,000-lb trailer has a pin weight of about 3,500 lbs.
Replaces the 21" handle on your etrailer or Ram landinggear (STLG-5003321) and allows you to manually retract or extend the jack legs.Features: Replaces the crank handle on your etrailer or Ram manual landinggear (STLG-5003321) Durable steel construction with corrosion-resistant zinc-plated finish Length: 21"
Replace the crank from your etrailer or Ram landinggear set (RVLG-8HDL). In case of power or mechanical failure, this crank handle will let you manually retract or extend the fifth-wheel landinggear legs.Features: Replaces the crank handle from your etrailer or Ram 5th-wheel landinggear set (RVLG-8HDL) Durable steel construction with corrosion-resistant zinc-plated finish Handle radius: 8-1/2"
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
Replaces the 12" handle on your etrailer or Ram landinggear (STLG-5003312) and allows you to manually retract or extend the jack legs.Features: Replaces the crank handle on your etrailer or Ram manual landinggear (STLG-5003312) Durable steel construction with corrosion-resistant zinc-plated finish Length: 12"
Replacement manual crank handle comes in handy in case of lost power at your campsite or a mechanism failure. Use the crank handle to manually raise and lower fifth-wheel landinggear.Features: Crank handle manually retracts or extends your 5th-wheel landinggear legs in case of power or mechanical failure Can also be used with Lippert electric stabilizer jacks Overall length: 29"
Replaces the broken crank handle for your Stromberg Carlson landinggear (LG-1, LG-2, LG-3, LG-4, or LG-183708).Features: Replaces the manual crank for your tandem landinggear Designed for use with Stromberg Carlson landinggear (LG-1, LG-2, LG-3, LG-4, or LG-183708) Also works with most other brands of landinggear, including Atwood and Lippert Constructed of heavy-duty steel Specs: Overall dimensions: 30" long x 10-1/2" wide Inner diameter of metal shaft where it connects to the landinggear: 1/2" Diameter of outer sleeve on landinggear end: 3/4"
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landinggear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landinggear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with 58" or more between front landinggear legs 1-Year warranty
Minimize chassis movement in your fifth-wheel RV with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 stabilizers for use at front of camper and 2 for the rear.Features: Helps to stabilize your 5th-wheel RV and eliminate unwanted chassis movement Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying Installs easily on 5th-wheel campers Bolts onto C-channel, I-beam or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landinggear - adapters for electric and hydraulic jacks sold separately Telescopes for perfect fit Locks securely in place with simple twist of T-handle Bolt-on installation - no welding required One end of each stabilizer tube attaches to each landinggear leg and the other end attaches to the RV frame Includes: 6 Stabilizer outer tubes 6 Stabilizer inner tubes 2 Clevis brackets 6 Stiffening pads 4 Spacer mounts 6 T-bolts 4 Flanged bushings 30 Nuts 48 Washers 18 Hex cap screws 10 Swing bolts 2 Silver bullet lifting handles 2 Hex nuts 8 Hex washer heads 1 Warning sticker for jacks Application: 5th-wheel trailers with less than 58" between front landinggear legs 1-Year warranty Specs: Telescoping tube: Retracted length: (2) 24" and (2) 27" Extended length: (2) 44" and (2) 47" 1-Year limited warranty
... Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.In fact, this should work more efficiently, allowing you to spend less time cranking. Note: Do not use landinggear to lift your trailer during tire changes or service work, because doing so will exceed the capacity of the landinggear.
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is 32-3/4". Extended height is 53-1/4".Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.How Easy Will it be for You to Install the Ultra-Fab Deluxe LandingGear? For most landinggear, it's typical to have 2 weld stops that measure either 17-1/2" or 21-1/2" apart (measuring outside to outside).
Electric, fifth-wheel landinggear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Electric, fifth-wheel landinggear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Manual landinggear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Electric, fifth-wheel landinggear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Electric, fifth-wheel landinggear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. ... Do not use landinggear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Cross brace bars permanently attach to your fifth wheel's landinggear to reduce your trailer's movement while parked. After installation, the braces will extend and retract with your landinggear. ... Features: Cross braces permanently attach to your 5th wheel's landinggear to reduce your trailer's movement while parked Braces extend and retract with landinggear for easy setup and storage Tubes adjust by hand to maximize stability Pin flags lock tubes in position Black powder coat finish resists corrosion Easy, bolt-on installation with included hardware - no drilling required Specs: Application: square, electric landinggear legs Tube dimensions: Fully retracted: 54" long x 1" diameter Fully extended: 80" long x 1" diameter Weight: 22 lbs 1-Year limited warranty Note: This stabilizer will not work with round, hydraulic landinggear legs.
Give your 5th-wheel trailer or camper some new legs! Upgraded motor works nearly twice as fast as the standard 80 RPM base model. Outer tubes are 29-1/2" long with 15-1/2" between weld stops. Total lift includes 16" of drop leg.As long as these measurements match the legs you're replacing, you should be able to swap out your current landinggear for this set, even it's from a different brand. How to Determine the Weight Capacity You Need in LandingGearLandinggear stabilizes about 25% of your trailer's total weight when it's loaded with cargo.
Replace a damaged hydraulic landinggear jack on your dump or flatbed trailer. This black jack has a 20,000-lb static support capacity, 24" stroke, and 9" footplate. ... Features: Replaces an existing hydraulic landinggear jack on your dump or flatbed trailer Supports up to 20,000 lbs of static weight Operates using your trailer's existing hydraulic pump system Black anodized metal construction Includes 2 elbow fittings for hydraulic connections Mounting bracket not included Specs: Application: Hydraulic landinggear for dump and flatbed trailers Static support capacity: 20,000 lbs Stroke: 24" Retracted height: 32-1/2" Extended height: 56-1/2" Footplate: 9" Construction: Black anodized metal Operation: Hydraulic pump system Included components: 1 Hydraulic jack 2 Elbow fittings Mounting bracket: Not included
Replace a damaged motor and gear box assembly for Ultra-Fab fifth-wheel landinggear (UF17-943010) with this equivalent part.Features: Replaces a damaged motor and gear box assembly for Ultra-Fab deluxe 5th-wheel landinggear (UF17-943010) Includes 1 replacement motor gear assembly
Filters
