Search: landing gear   >  

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

Thanks for all the information! You are correct that is the lead leg because it is closest to the gear and the motor. However, in order to determine which replacement lead leg you need, you'll need to find the model of the landing gear on your…

The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs #LG-4 will work well with your trailer. I've attached a photo that shows where the weld stops are for the brackets mounted on your trailer. You…

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

The only difference between the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear #RVLG-8HDL that you mentioned, and the Landing Gear Set #RVLG-8000 is that #RVLG-8HDL comes with the handle, whereas if you were to go with…

Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…

The first thing you want to do before you find a replacement is to check the rating on your current landing gear. You want the new landing gear to be rated for at least the same amount. You will also need to measure the weld stops to make sure they…

Yes, you can put 2 lead legs on your 2019 Forest River Stealth so you can operate them individually, and for that you can use the following parts: - Replacement Lead Leg #LC122533 - Landing Gear Motor #LC142178 - Replacement Gearbox #LC276602 This…

In previous interactions we have found the 2010 Keystone Laredo 5th wheels to use Venture VMC900 landing gear. This would give you the Replacement Follow Leg #LC119101. I do recommend verifying this is the correct leg for you by measuring your…

It definitely sounds like the internal gears on your existing landing gear system are shot so a complete replacement is your best option. I'm not able to track down what specific model system would have been installed at the factory on your 2004…

From what I could find it looks like your ADTH 1RV-200 motor has a weight capacity of 6,500 lbs. You can use a motor that is rated for a higher capacity, like our replacement motor #LC142178 for Ram landing gear which is rated at 8,000 lbs. Just keep…