Search: timbren axleless   >  

It looks like you ordered the Timbren #ASR1200S02 which uses #L44649 bearings. I recommend using the Easy Grease Trailer Idler Hub for 2K Axles #AKIHUB-545-2-LFEZ-2K which is designed for 13" to 15" wheels. You won't find…

The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well you'd want…

Yes, the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs #ASR35HDS02 can be installed on your Harbor Freight Trailer. The best part about this system is that it fits any frame width and can be…

I recommend the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D #AM32424 which are rated for 2,150 lbs at 65 psi but are also rated for speeds of up to 81 mph. I have added a link to a video review to…

The tire size ST175/80R13 is pretty standard, so we can definitely get you replacements for the tires. I suggest going with the Taskmaster Provider ST175/80R13 Radial Tire #TTWTRTM1758013C. These are rated up to 1,360 pounds at 50 psi and also has an…

The Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D #AM32424 will work on your 2011 R-Pod 177. It will be a stronger tire with a load capacity of 2150 lbs at 65 psi. This will give you an 8 ply rating…

Timbren likes to recommend 1 inch between the axle and the Timbren when the truck is unloaded. We have found that this works the best. This allows the suspension to feel when the vehicle is unloaded and still gives you support when needed when…

It sounds like you have a pretty nice trip planned! Bias trailer tires do not have a set range you can travel as they meet DOT standards for a tire. With that said before you start your trip I would make sure to check your tires for any dry rot or…

The hubs that fit the Timbren Heavy-Duty Axle-Less Trailer Suspension #TASR35HDS06 use inner bearing #25580, outer bearing #15123, and a grease seal with a 2-1/4" inner diameter. For regular hub use part #AKIHUB-655-6-EZ-K but if you are wanting…

I would be happy to help! There are a few different systems that will work with hubs that have the 6 on 5-1/2" bolt pattern, and the correct one will be dependent on the axle rating of your current axle. More than likely you will want the…

It's very common for smaller single axle trailers to have brakes installed on them already. Most likely if you look you'll find options in the size you want that are already set up with brakes. This would be the easiest and most cost…

The spring capacity is the weight the spring is designed to support. For example the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long #e57SR you were looking at is designed for 4000lb axles, meaning each spring can support…