bing tracking image

Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84656UC3-EZ

content loading

Customers compare 84656UC3-EZ to these similar products




Products Featured in this Video



Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84656UC3-EZ Review


Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Dexter 10-inch-diameter trailer hub and drum assembly with the hardware for 3,500-pound easy-lube axles. This hub and drum has a 6 on 5 1/2-inch bolt pattern. This trailer hub and drum assembly will provide the surface area right in the inside here for your brake shoes to grip when your electric brakes are activated. It is compatible, you can see, with electric or hydraulic drum brakes. This assembly is for easy-lube axles, and those are the axles that have the easy-lube spindles on the end that allow you to grease your bearings without having to remove the complete hub assembly.

It does come with this easy-lube-compatible grease cap that when this is installed like that, makes lubricating the bearings very fast and easy. All you have to do is pop out this rubber plug in the center here, and then that'll let you access that zerk fitting that's on the spindle on your axle. Pump the grease in there and you're ready to go. There's no need to disassemble this whole hub and drum assembly. This is a sturdy iron construction, and this does include everything laid out here on the table.

Comes with the hub and the drum, with the spindle nut and the retainer to hold it to the axle. Comes with the bearings. Comes with the bearing races, which are pre-installed into the hub and drum. Comes with the grease seal, comes with the grease cap, and it comes also with the wheel lug nuts. To go through each ones, the bearings that are included; the inner bearing, which is a part number L68149.

The outer bearing, which is part number L44649. We mentioned the bearing races that are already pre-installed into the hub. The grease seal right here that goes in the rear; that is part number 58846. The easy-lube center cap we mentioned; that's part number 21-41-1. And then the six half-inch by 20-size lug nuts are part number CE11051.

Specs on this again; the application is 3,500-pound easy-lube trailer axles with the number-84 spindles. The drum dimension is 10-inch diameter by 2 1/4 inches wide. It is designed to work with a 10-inch brake assembly. The wheel size this'll fit is up to 16-inch in diameter. We mentioned the bolt pattern on this is a 6 on 5 1/2-inch bolt pattern. But that should do it for the review on the Dexter 10-inch-diameter trailer hub and drum assembly with the hardware for a 3,500-pound easy-lube axle..


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.