Hands-On with the Rear Hanger for 2" Wide Slipper Springs Video

Yes, you have the Global Link RV Entry Door Locking Latch Kit part #295-000002 so the correct replacement key for your Wells Cargo Trailer is the Replacement Key for Global Link RV Locks (316) is part #295-000042.

I went out to the warehouse and pulled wheel lock set #RG01-150. The overall internal depth of the nuts that thread onto the wheel studs is 1-1/4 inches including the threaded part. The threads make up 3/4 of an inch of that 1-1/4 inch overall…

The picture with the torn up bushing looks like the eye of your slipper spring. Is that correct? If so, it is coming undone and probably the reason you're having this problem. It should be enclosed and not look similar to the hook on the end of…

For your application I recommend using the 4-Leaf Slipper Spring w/ Hook End for 4,000-lb Trailer Axles #SP-230275. This measures 26-5/8" to the end of the spring but if you check out the attached photo you'll see that it will fit great with…

The closest thing that we have to replace your 3-1/4" wet bolts is the Spring-Eye Bolt with Locknut for Slipper Springs #166079 which measures 3-1/2" long and has a 9/16" diameter. This is a regular bolt without the grease fitting so…

The Redline Wheel Lock Set #RG01-150 are not coded like a door lock is. Essentially, these are unique lug nuts used to make it more difficult for a would-be thief to steal because most people are not going to be carrying around the special socket to…

The Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) #RG01-150 are the traditional 1/2-20. The actual depth of the locking nut is 1-1/4 inches.

For a 7/8 inch bolt to use with the #TREQ4541 we only have the part #TRFA71063 which is 4-11/16 inches in length. It may seem a little long but it would still work well. The wet bolts are just as strong as the non-wet bolts we carry.

The varying heights of the hangers is all designed so that you end up with the leaf springs as level as possible and still end up a desired distance away from the trailer frame. It may seem odd, but the center hanger will stick down further because…

If you need an axle replacement because one is damaged, you will be fine sticking with the 7,000 lb axles you currently have. All you would need to do is get the hub face to hub face measurement to choose the right axle length. We have 94"…

I definitely recommend replacing your 3,500 lb 26 inch leaf springs with the 26 inch 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR. The 4,500 lb would be too stiff and your ride would suffer so the better option by far are the 4k…

The number of leaves on a leaf spring is not the only determining factory in the amount of weight it can handle. The thickness of each leaf as well as what the leaf is made out of can affect the weight rating and performance of the spring. The…