Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…
view full answer...Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
view full answer...While we do not have an installation video exactly for your 2008 Ford F-250 John, we do have one for a 2008 F-350 which is going to have the connector in the same location on the dash. I have linked the video near the bottom of this page where you…
view full answer...Yes, the mounting brackets included with the DeeMaxx Disc Brake Kit #DE72FR are also stainless steel.
view full answer...Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…
view full answer...Absolutely! If you would rather not connect the trailer to your tow vehicle, you can simply use a separate car/truck 12V battery to test the electric brakes on your trailer. You can apply power to the appropriate brake input pin on the trailer…
view full answer...The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…
view full answer...In order to install a 7-way trailer connector on a 2022 Mazda CX-9 you'll need to start with a 4-way, the T-One Vehicle Wiring Harness for Factory Tow Package part #118278 which is plug-in-play. Then you can adapt this into a 7-way using the 4 to…
view full answer...Although the Tekonsha Prodigy P3 #90195 and Primus IQ #TK90160 electric brake controllers are very similar they do have some key differences as well. For one the P3 is designed to work with electric and electric over hydraulic brake systems. The…
view full answer...Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…
view full answer...The Prodigy P2 brake controller #90885 and the Primus IQ #TK90160 share some basic features, but there are many differences. The most obvious ones are the displays and appearances of the units, which are connected to the usability of the brake…
view full answer...Installation of a brake controller on your 2007 FJ Cruiser will require hard wiring with a Brake Controller 7- & 4-Way Installation Kit, item #ETBC7. We have detailed instructions, see link, and a video installation, see links, of this kit and a…
view full answer...Related Searches
Filter Your Search
Contact and Help