Replacement RV Roof Vent Lid for 2018 Sandpiper 372lok

Question

Question:

See attached

asked by: Tyler D

0

Expert Reply:

I'd have to see a picture of the vent you have now to determine what the correct replacement would be.

expert reply by: Jameson C

0

Roof Vent of 2018 Sandpiper 372LOK
(click to enlarge)

Tyler D.

3/30/2022

See attached

Reply

Jameson C.

3/30/2022

Thanks for the picture. Based on that you have the Ventline Ventadome so for a replacement you'd need the part # BVD0449-A01.

Reply

Answer 1

The best way to determine if we have a replacement cover that will fit your trailer vent is to locate the manufacturer name or model number of your roof vent. If you are unable to locate this information you will want to measure the vent opening as…

view full answer...

Answer 2

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 3

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 4

We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part #BVD0449-A03 in Smoke or #BVD0449-A01 in White. The cover measures 14 inches x 14 inches and…

view full answer...

Answer 5

I sure can Adam. What are the dimensions of your ceiling fan vent and do you have a model number? I do not have a database that shows me what part numbers are on your camper so I can't look that up. The Vent Cover for Ventline Old Style Rounded…

view full answer...

Answer 6

Hello Nick, thanks for reaching out. The Dutton-Lainson Boat Trailer Jack #DL22335 may work for you. It has 7/16" holes. They are 5-1/2" apart across. There is 2-3/8" between the top hole and the hole under it. Then there is 1"…

view full answer...

Answer 7

Hi Shawn! You're dealing with a common issue when installing a MaxxAir II cover #MA76JR on a MaxxFan 4751KS, like the #MA00-04751KSX. Here’s the situation you're running into: -First, the MaxxFan lid opens almost vertical when fully opened…

view full answer...

Answer 8

No, The Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents - White #MA10A40002K is not the correct cover you will need for your Maxxair 4700G. The correct cover you would need is The MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer…

view full answer...

Answer 9

For your MaxxAir 4951KS the correct replacement lid is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K (smoke) or part #MA10A40002K (white). The shape of the lid is slightly less rounded as your current lid but it will…

view full answer...

Answer 10

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 11

Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly…

view full answer...

Replacement RV Roof Vent Lid for 2018 Sandpiper 372lok

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching