Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Bulldog Powered-Drive Trailer Jack you mentioned, part #BD500199 is covered by a 5 year Limited Warranty. If you click the provided link, you can see a video showing the jack being installed.
view full answer...You can determine whether either of our baby moon hubcaps, part #AM90086 or part #AM981306, will fit a wheel by measuring the outer diameter of the inner ring and then the outer diameter of the inner ring with one of the tabs (see attached photo).…
view full answer...To install the Replacement Foam Grip with Hardware for Lend-a-Hand Grab Handles for RVs #FP-1001-R that you referenced will require you to remove the handle from the mounts of the RV. You'll want a ratchet/socket plus a wrench to do this. Once…
view full answer...The Yates keel pad, #YR1203SY, is pliable but still fairly rigid. It can bend some but if it needs to bend too much it might not stay secure. The ambient temperature also affects it. It is less pliable when cold. It also bends up at the ends a little…
view full answer...It is a bit difficult to see in the picture, but there are mounting holes in the 4 tabs along the sides of the #YR1203SY keel pad. You would just need to screw through the tabs to the sides of the cross member. We do not offer any hardware…
view full answer...The Blue #YR1203SB and Yellow #YR1203SY Yates Keel Pads are the only keel pads we carry. While they do have some play you may consider trimming some of the side material on the pads which will allow it flex a bit more.
view full answer...There isn't really a lot of differences between the Hopkins 7-Way RV Style Connector with Molded Cable - 8' Long - RV Standard #H20046 and Hopkins 7-Way Blade Style Connector with Molded Cable - 8' Long - Auto Standard #HM20041. Both are…
view full answer...Hello Jim, Great question! Because there is not a real standard to trailer suspension I do not have a direct answer for the spacing for the hangers to install the #e36FV. It all depends on what size shackle you are using, if the spring is over or…
view full answer...To know exactly what key will fit your enclosed trailer's access door lock we'll need to know the brand and the key code. For example, since you were looking at a Bauer door lock, if your key code was 357 then you could use the Replacement…
view full answer...The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…
view full answer...For your 14 inch trailer wheels with a bolt pattern of 5 on 4-1/2 inch the Phoenix USA QuickTrim Ring Cover #PXQT544CLO will fit and work well since that's what it is designed to fit.
view full answer...Hey Adam, thanks for the information. The Dexter Brake Actuator with Manual Lockout item #T63FR is going to be a pretty comparable replacement to your Titan Aero-6000. It works with a 2" hitch ball, fits a 3" wide tongue, and has a 7,500…
view full answer...