Arrives before Christmas 
2" Diameter. Waterproof, LED trailer light serves as a side marker or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 2-prong plug. P2 rated.
Features:
Specs:
This red LED light serves as either a side marker light or a clearance light. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent vehicle and trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
The surface-mount technology used to construct these lights protects the LEDs from shock and vibration better than through-hole technology because the diodes are soldered directly to the surface of a printed circuit board instead of attached with wires that run through holes in the board. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability, and durability.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate light on your trailer - one as a front or rear clearance light and one as a side marker light.
This GloLight has a standard 2-prong plug as pictured above. A 2-prong pigtail with mating plug (A46PB or A49PB - sold separately) is required to connect this light to your vehicle or trailer. An optional mounting bracket is also available (BK5557GB - sold separately) to make it easier to mount the light on your trailer.
Recessed-mount trailer lights install underneath a housing or a grommet (A54GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Brett Johnson: (silence)The Glolight is the stunning combination of premier lighting technology, meeting world-class style and capabilities. The introduction of the Glolight series represents the first truly different approach in years to the visual presentation of stop-tail-turn lamps.Most LED lamps have hotspots or patterns of bright light. Glolight lamps are visually distinctive from other LED lamps, because their lenses diffuse the light, giving them a smooth, bright, glowing appearance.The Glolight optical technology is so different, it's patentable. And Optronics has 35 new products with Glolight technology in its pipeline, right now. Mudd: Lighting is one of the most visibly predominant features on any vehicle, and this is a completely different looking yet highly effective light. We're focused on integrating the latest technology into our manufacturing process, and these new lights clearly represent the innovative partnership between Vanguard and Optronics.
Innovation is important to Vanguard, our customers, and our industry. Robert: Glolight technology looks different because it is different. Different in its optical approach and different all the way down to the circuit boards.We designed and manufactured all of our lamps using the most advanced engineering techniques, and test them in our own world-class, state-of-the-art optical testing facility. Lamps are engineered to resist everything, from shock, to dust, to high-velocity water spray. We're committed to designing and manufacturing erosion-resistant LED lighting products.
And Glolight lamps are produced using solid state, surface-mount device, or SMD, technology.Most LED lamps sold in the heavy duty market today, use what is typically referred to as "through hole" construction. Optronics LEDs are mounted directly to the surface of the circuit board, eliminating exposure to connecting points. LED lamps with SMD technology, like Optronics' new Glolight, are so robust that they can continue to function even if their circuit board is completely submerged in water. The unique Glolight lenses and housings are made of tough polycarbonate material that is sonically welded to create an impermeable seal. Glolight lamps meet all FMVSS 108 and SAE photometric requirements for visibility and safety.
And our lamps are tested at a certified, independent laboratory.I guess it's redundant to say this, but our lamps come with a lifetime warranty. Roush: There's nothing out there that's as eye-catching and effective as these Glolight lamps. Vanguard is always drawn to component supplier products that contribute to our customers' efforts to operate more effectively and safely. Glolight lamps just look different and more noticeable. And that means better safety.
Brett Johnson: With world-class manufacturing facilities, harness making capabilities, and a global market presence, Optronics is now changing the competitive landscape in HD lighting. We always have access to a lighting manufacturer with global sophistication, fleets are enjoying increased product availability, and everyone is befitting from new, innovative technology and the industry's most competitive pricing structure. With Glolight, Optronics is sending a signal that things have changed in the HD lighting industry.
Average Customer Rating: 4.8 out of 5 stars (1390 Customer Reviews)
2" Diameter. Waterproof, LED trailer light serves as a side marker or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard 2-prong plug. P2 rated.Great service like always from etrailer. Lights were exactly as described on the site. I haven't put them on yet but will be going on a Eby horse trailer in the spring when the snow melts.
Item was of good quility, and set my trailer apart from others.
Really does stand out compared to other LED markers
Easy plug and play installation. Hopefully won't have to change again as long as I own the trailer.
Installation was easy and straight forward. Lights are bright, durable and modern.
etrailer has outstanding service as alw ays!
Great upgrade and much brighter than the original incandescent bulbs.
Fast service great parts
fits well still works after a year
Super fast shipping. Haven’t installed yet.
Light look great. Very bright
I gave 4 stars because I really thought they’d be brighter for backup lighting. They definitely do help in letting others know you’r intentions from behind.
We installed these clearance lights on a 16-foot tandem axle trailer a year ago that is primarily used for hauling firewood. We use it in the forest and most of the road miles are gravel. Since the lights are not housed in a recessed light fixture, we made one of steel pipe with the leading edge extended ¼ inch to deflect flying road rocks and running through brush in the forest. All the wiring under the trailer is in conduit and all the wiring is Ancor brand marine grade. Had we installed the lights as demonstrated in a picture on the etrailer.com web site, the lights would have been damaged quickly in our service conditions. The Led lights are working fine although they run a bit hotter than preferred which may lead to a shortened life. Tip: Never use copper clad aluminum automotive wire from China on trailers as aluminum is the sacrificial metal for cathodic corrosion and the wire conductors will soon disappear into powder.
This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.
Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.
Pic is LED before anchoring compared to the stock on the right. BIG improvement.
etrailer does provide a wide range of products with different price points so the customer has a lot of choices to make the decision that is right for her\him. You also offer good online support documentation and your technical staff is also very helpful in helping the customer make the right choices.
Unfortunately, you left me with a very bad experience. I ordered a full set of lighting & wiring to redo our quad trailer from the 7-pin plug to reverse lights. A large order. I erroneously ordered 2 reverse\turn single lights, which is on me, so I expected a restocking fee (a little excessive, but that's the inventory business). I had to return the 2 wrong lights and order the correct one. I returned both lights, but etrailer said they only received one, which I was 99% sure I returned both. You had no interest or showed any flexibility considering maybe I was correct. This is a one year review you have asked me to submit and the light you claimed I did not return, still has not shown up in my garage. I liked dealing with you on numerous occasions, but I have taken my business elsewhere. That was a sad experience.
Amazing upgrade from the old metal lights even with led replacement bulb in the metal cans. One video is the halo tail lights installed, the other is chasing a ground issue with the old lights for comparison.
These lights were added to my cargo trailer that I pull behind my motorcycle. These help to make sure that people see me when I am on the road. The lights were easy to install with the grommets and pigtails that I ordered at the same time. All the products worked together well and made the project easy to do. Love these lights and will buy more if needed.
Great Light! Put two on the back of a toyhauler for backing up.
You will need the grommet and pigtail to do it right.
I had to cut two oval holes for mounting in trailer frame. Take your time with the layout and get the right sized hole saw, makes installation pretty easy.
Great Product, it's good quality and will fit perfectly for the trailer I use in my Air Conditioning, Heating & Refrigeration Business. The only problem is I ordered the wrong side. Wasn't sure if by the which one was the left or the right? I was looking at the trailer form the front when I determined it was the left one but it appears your suppose to look at the back of the trailer when you do that. Guess I will be ordering the otherside here shortly. Maybe I can get an exchange or if not then I will have a spare and hope if it does get broken again it's the other side. Etrailer has some really good quality stuff at a very good price. I got my hidden hitch from them at a Great Price. They even had a video that showed me how to install it. A couple of the local places here wanted 3 times the amount of what I paid to provide the hitch and install it for me. Will never go anywhere else for any trailer parts or accessories.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.