Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 3/4" round GloLight Uni-Lite puts out a bright, solid red glow that’s easy to see and uses very little power. The two white LEDs behind the red lens draw only 0.052 amps at 12.8 volts, so you get strong light output without stressing your wiring or draining your system. The LEDs last up to 50 times longer than old incandescent bulbs and never need replacing. It’s a clean, even light that looks great and stays reliable year after year.
If you deal with rain, spray, or launch ramps, this light is made for it. The polycarbonate housing and acrylic lens are sonically sealed together into one waterproof unit that keeps water out completely. Because the circuit board uses surface-mount technology, it can take on vibration, shock, and moisture without failing. You can count on it to stay bright and corrosion-free even after repeated exposure to water.
This light’s PC rating means it throws a 90-degree beam to each side of center for a full 180 degrees of coverage. When mounted correctly, it works as both a clearance light and a side marker light so your trailer can be seen clearly from the front and sides. That wide beam pattern helps others notice you sooner in low-light conditions.
At only 3/4" in diameter and 7/8" deep, this light tucks neatly into tight spots. It installs in a 3/4" hole using the included grommet for a clean recessed look that also protects the lens from damage. The simple two-wire pigtail—one power lead and one ground wire with 0.156" female barrels—makes wiring quick and straightforward.

The GloLight lens creates a smooth panel of solid red light instead of visible LED points, giving your setup a more polished appearance while staying DOT compliant. It’s a small detail that gives your lighting a distinctive, finished look without adding complexity.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the GloLite Uni-lite Mini LED clearance or side marker light. This is a three quarter inch diameter by seven-eighths inch round trailer light that can function as both a clearance light or a side marker light, depending on how you have it installed. It can work as both simultaneously if you have it installed properly, and that is because it is PC-rated, which means you'll be able to see it head-on like so, or from a 90 degree angle to give you a total 180 degrees of visibility.This is a sealed waterproof construction, so it is submersible. So, if you want to put it on your boat trailers, they'll do just fine there.
This is a red acrylic lens over top two white LEDs. It also has a durable polycarbonate housing, so it is going to last you a nice long time. With LEDs, if you're not familiar, they are a great option. They do last longer than your older style incandescent lights because they don't have the brittle filament inside that tends to break on the incandescence, so they are going to last about 50 times longer than your incandescent lights do. This one does have a lifetime warranty on the LEDs, so they are going to last you a nice long time.
Plus, they're more efficient, so you're going to get a brighter light with less power draw. So, LED is a great way to go.This does feature an LED circuit board that is constructed using the surface mount technology, so it's going to be very durable. It's going to help better withstand shock, moisture, and vibration, so it's going to hold up really well on your trailers, especially if you're taking them off road, something like that, they'll hold up well, do a good job for you. It also helps with the heat distribution, as well as making it a thinner construction. So, it's very durable, should do a good job for you.You can see, we do have this grommet here.
This is going to allow us to have this recessed mounted, so that you just have to drill a three-quarter inch hole and then slide this in. And then, it will sit there on our trailer like so. So, it'll just stick out a little bit. This does have a two wire pigtail to it, so you've got your white ground and your black power supply. Does have the 0.156 female bullet connectors to get this plugged in, so it'll plug right in to your two male bullet connectors to get right going to your trailer.This is Department of Transportation compliant, so it's going to meet all those standards, allow you to pull your trailer safely and legally.
And I think, overall, this is going to be a great option for you. It's going to provide a bright light, make sure that all of your side marker lights or tail lights are visible as you're pulling that trailer. So, that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Michael
2/26/2025
The clearance lights are still functioning as they should. I am still happy with my purchase.