Versatile 3/4" red LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. PC rated.
This 3/4" red LED clearance and marker light does more than just improve visibility - it also features a high-output mode that serves as an auxiliary third brake light.
The included rubber grommet provides a snug, secure fit, while the 3-wire bullet connectors lets you just plug into the bullet connectors on your trailer.
Built to handle wet conditions, this light features a sealed, waterproof housing that protects against rain, road spray, and full submersion. Whether you're towing through storms or launching a boat, you won't have to worry about water damage shortening the life of your lights.
Also known as bullet lights, these compact LEDs are popular for more than just visibility. Used in multiples, they help keep your trailer street legal while adding a custom look. Whether lining your trailer, truck, or RV, they provide both function and style.
PC rated as both clearance and side marker light when properly mounted at a 45 angle. A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern makes the light visible from the front and both sides, enhancing visibility and safety. When properly installed, it functions as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer.com. Today we're looking at our LED clearance side marker or third brake light. It's a bullet style light, it's submersible and it's red with three bullet plugs. So folks, it's versatile, it has dual intensity lights, as you can see, I've got it wired up for running. And then if you hit the brakes, it would get a little brighter.
And let's go ahead and turn off the overhead light so you can see that in real time. So again, running light. And then if I hit the brakes, it's brightening up, has a nice high output mode for use as an auxiliary or third brake light. And then obviously if you had your blinker on or whatever, you could wire it up that way as well. It is waterproof, it's great for boat trailers.
It has a nice sealed housing so you don't have to worry about water getting in and those kind of things. And it also, again, comes with these bullet style plugs to make it install really easy. And of course the gaskets included that you would go around to have it held in place on the trailer. So there's a little better view of the back. Again, everything's sealed up nice.
Has a wide voltage range that can run between nine to 16 volts, so that makes it perfect for 12 volt systems. It's a three quarter inch diameter overall in the front face of the light, and it's about 13, 16 inches deep or tall, minus those wires. Now this does need you to have a three quarter inch hole that the grommet actually pops into and holds that in place. So keep that in mind, folks. That is gonna wrap it up for our quick look together.
I'm Steven. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.