Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey William! The DeeMaxx Trailer Wheel Lug Nut #DE93GR will fit the wheels on your 2008 Jayco Octane ZX TT Toy Hauler as long as they have a cone shape where the studs protrude through the wheel. This lug nut fits a standard 1/2" stud and…
view full answer...Yes, the 60-Degree angle of the 1/2"-20 DeeMaxx Trailer Wheel Lug Nut #DE93GR is standard for the vast majority of trailer wheels out there. There are some 90-Degree cone shapes but these are typically for 5/8" and 9/16"…
view full answer...The DeeMaxx Trailer Wheel Lug Nut #DE93GR that you were looking at are chrome, not stainless steel. For a comparable lug nut in stainless steel, you will need the Kodiak Trailer Wheel Lug Nut #KALN1375S.
view full answer...A 19 mm socket would be needed to remove the DeeMaxx Lug Nut part #DE93GR.
view full answer...All of that is not necessary. All you have to do is lock out the surge coupler so it cannot move in and out or disconnect the brake lines. By removing the old coupler you would have to remove the brake lines any way. A surge coupler can still be used…
view full answer...First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…
view full answer...The DeeMaxx Trailer Wheel Lug Nut #DE93GR is 1.4" in length.
view full answer...Yes we do. The part number you are looking for is #DM5817 and is the correct latch repair kit for your Demco Channel Tongue Trailer Coupler #DM12662-97.
view full answer...The Demco coupler #DM12662-97 is fairly shallow front to back. Because of that you are going to want to weld it everywhere that it makes contact with the trailer tongue especially considering the capacities involved. That would be the back side and…
view full answer...Normally this would be a difficult question to answer but since 14 inch trailer wheels all have the same bolt pattern of 5 on 4-1/2 inch I am able to help. For a wheel that is 14 inch in diameter and has a width of 6 inches we have the part…
view full answer...We do have 1/2"-20 lug nuts that are solid and not capped, though no OEM direct replacements. What you can use is the following: - DeeMaxx Trailer Wheel Lug Nut #DE93GR
view full answer...The Americana Trailer Wheel Lug Nut #AM90049 has a flat length of approximately 7/8" for your hex socket. We do have the Chrome Trailer Wheel Lug Nut #12CLN-L which also fits a 1/2"-20 thread and has a 1-3/16" flat area for the…
view full answer...Filter Your Search
Contact and Help