Customers compare AM90049 to these similar products
Products Featured in this Video
Today we're going to review part number AM90049. This is the Americana 1/2 inch by 20 trailer wheel lug nut with the chrome-plated finish. The 1/2 inch by 20 designates the size of bolt that this will fit on; 1/2 inch is the diameter and the thread 20 means 20 threads per inch. Usually on most lug nuts they will be stamped. If you see on this one, it'll say 1/2 inch by 20 to let you know what size… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...The wheel size you have is a 16 inch diameter that is 7 inches wide which is not super common but we do have a coupler options like with the Aluminum Mod wheel part #LHJM513 that has a 3,750 lb or for a more interesting look we also have the Aluminum…
view full answer...You will want to use the same tire size for a spare on your 2024 Coleman Lantern. If the appearance doesn't matter to you then you could use the Karrier ST215/75R14 Radial Trailer Tire with 14" White Wheel #AM32181. After looking at pictures…
view full answer...Hey Steve, I can't seem to find anything with that pattern that didn't come up as a damaged wheel where the bolt holes were damaged, throwing off the measurement. Are the bolt holes on your wheel worn/oblong? With you being at 4-7/8"…
view full answer...The standard six lug bolt pattern for trailer wheels is 6 on 5-1/2 inches. If you have a six lug bolt pattern this would be what you'd have. The pilot diameter wouldn't be an issue either as the 6 lug wheels use a large enough pilot diameter…
view full answer...For hubs that have 1/2" studs, like the Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles #AKHD-865-7-2-EZ-K you're looking at, you don't want to exceed 120 ft-lbs as that's the most torque this stud size can handle.…
view full answer...The Americana Trailer Wheel Lug Nut #AM90049 has a flat length of approximately 7/8" for your hex socket. We do have the Chrome Trailer Wheel Lug Nut #12CLN-L which also fits a 1/2"-20 thread and has a 1-3/16" flat area for the…
view full answer...The torque spec for the lug nuts on the Aluminum Modular Trailer Wheel part #LHJM513 should be between 90-100 ft. lbs. which you can see from the attached chart. I have also attached for you some additional parts you may what to use with this wheel.…
view full answer...A 16 x 6 trailer wheel like #AM20766 can accept the trailer tire sizes 235/80-16, 235/85-16 and 7.50-16LT which we offer. But a wider 245 tire (9.6-inches wide) needs a rim that is 6-1/2 to 8-inches wide such as 16 x 7 wheel #LHJM513.
view full answer...For a Dexter 3,500 lb trailer axle hub the correct replacement wheel stud is the part #7-122.
view full answer...Thank you for the picture. It looks like you have the Black Aluminum Bearcat Trailer Wheel. Although the black has been discontinued, we do still have the gunmetal gray #274-000039. This matches your current size and bolt pattern as well. To…
view full answer...More than likely the stock lug nuts on your 2020 Pinnacle 32RLTS are a 2-piece design. The 2-piece design is susceptible to swelling when moisture infiltrates the space between the cap and the actual steel lug nut securing the wheel to the vehicle.…
view full answer...