Search: dx89fr   >  

I have a solution to get your Mastercraft boat trailer up and running again, but unfortunately we don't have a cross reference chart for parts for Reliable surge brake actuators. Manufacturers of surge brake couplers simply didn't…

The Dexter Surge Brake Actuator #DX29FR features an electric lockout. The surge brake actuator itself does not need to be plugged in to anything for it to work. The electric lockout does need to be wired if you want to be able to back up without…

The Dexter Zinc-Plated Brake Actuator #T47457007K does not have an access hole to insert a screwdriver to bleed the master cylinder. You will have to use the old method with a 2x4 and the safety chains. While the trailer is disconnected from the…

Thank you for all of the photos and information! From what I can see it looks like you have a #84 spindle but that inner bearing blew out so you should be able to remove that inner sleeve that looks like it's still on the spindle (next to where…

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout part #DX29FR for disc brakes and part #DX27FR for drum brakes use 1/2" diameter mounting hardware. We have used both grade 5 and grade 8 bolts when doing installations of them but the…

I spoke to my contact at Demco and he told that the Demco Hydraulic Brake Actuator #DM62VR should not slam forward when you slow down. He said this brake actuator is inertia based, meaning as you start to apply the brakes it will begin to slowly…

In terms of capability the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX89FR is a good replacement option. The problem is the design of your old TDE LP7000 which was installed inside the tongue…

The difference is the trailer tongue size the coupler was designed to fit. The part #DX29FR is designed to fit a 3 inch by 4 inch straight tongue whereas the part #DX56FR is designed to fit a 3 inch by 5 inch straight tongue. Aside from that they are…

That's a really good question, and there is a difference between the 7,500 lb Dexter DX7.5L A-60 actuators for disc brakes; the differences are both in what they fit, as well as their length. - 14" Long & Top-Mounted For 3" Wide…

When lubricating your Titan Model 6 the Titan Zinc-Plated Brake Actuator part #T43397007K I recommend using a white lithium grease like LubriMatic White Lithium Grease part #L11354. It will give you great protection and lubrication. You will want to…

Yes the Kodiak disc brake kit part #K2HR35DKG that you referenced will fit 13 inch wheels and larger. We verified this with Kodiak.

Yep, you got it, the bolt hole dimensions are 3" x 2-1/2" for the Dexter DX7.5L A-60 Brake Actuator For Disc Brakes #DX29FR. This fits over a 3" x 4" tongue and the ball to opposite end length you stated does not matter, no.