What Size and Grade Mounting Hardware for the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
Updated 08/31/2024 | Published 09/17/2020
Products Featured in This Question
Question:
What is the recommended bolt diameter for mounting this part? Do the bolts need to be grade 8 or grade 5?
asked by: PK
0
Expert Reply:
The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout part # DX29FR for disc brakes and part # DX27FR for drum brakes use 1/2" diameter mounting hardware. We have used both grade 5 and grade 8 bolts when doing installations of them but the grade 5 are sufficient.
There is very little force actually applied to the bolts other than side pull.
expert reply by:
Randy B
0
Product Page this Question was Asked From
Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Video: Dexter DX7.5L A-60 Brake Actuator Review
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Search Results: brake actuator
- Search Results: trailer brakes
- Q&A: Is Dexter DX7.5 Trailer Brake Actuating Coupler DX27FR a Replacement for UFP A-70
- Q&A: Can Holes be Drilled in Trailer Tongue to Install Buyers Products 10k Trailer Coupler
- Q&A: Can Dexter DX7.5L A-60 DX29FR Interchange with DX27FR
- Shop: Dexter Zinc-Plated, A-60 Coupler - 2" Ball - 3" Channel - Bolt On - 5,000 lbs
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Weld On - Disc - 2" Ball - Primed - 7.5K
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Weld On - Disc - 2" Ball - Primed - 7.5K
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: Review of Dexter Brake Actuator - Surge Brake Actuator - DX33FR
- Q&A: Length of 7,500 lb Dexter DX7.5L A-60 Drum Brake Actuator
- Search Results: flexible hydraulic brake lines
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Video: All About the Grease Seal
- Video: Hands-On with the Replacement Consumer Lockout Key for Dexter Axle Brake Actuators
- Q&A: Does Dexter DX7.5L A-60 Brake Actuator DX27FR Include Manual Lockout Key?
- Video: Detailed Breakdown of the Dexter Brake Actuator with Manual Lockout
- Video: An In-Depth Look at the Dexter Brake Actuator w/ Drop
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Search Results: brake lines
- Search Results: hydraulic brake lines
- Search Results: lug nuts
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Can I Weld on a Bolt on Brake Actuator?
David
8/30/2024
Does Etrailer sell those bolts?