Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
Updated 09/26/2023 | Published 09/25/2023
Products Featured in This Question
Question:
The spindle is unusal as it has a couple of raised ridges between the inner and outer seals. I’ve attached pictures to ensure that I get the right seals. Please provide the right beating and hub combination. A full pair kit with calipers preferred.
asked by: Mark
Expert Reply:
Thank you for all of the photos and information!
From what I can see it looks like you have a #84 spindle but that inner bearing blew out so you should be able to remove that inner sleeve that looks like it's still on the spindle (next to where the grease seal rides). Try using a hammer and flat head screwdriver to gently tap on that ring to see if it slides off the spindle without damaging anything. If you can get it off and your spindles look clean and don't have any damaged then it's a simple matter of just replacing the brake kit and for that I recommend this from DeeMaxx:
- DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coat/Stainless # DE46YR
This kit comes with the hub/rotor as well as the caliper and the bearings/seal needed to et everything installed.
If your spindle looks to be scratched or damaged then we either need to have it cut off and have a new one, part # TRU47FR, welded on, or we need to get you a whole new axle assembly and for that I'll need you to measure the spring-seat and hub-face dimensions of your current axle.
I've attached an installation video of the DeeMaxx brake kit as well as a video showing how to measure for a replacement axle for you to check out!
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coat/Stainless - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 14 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Q&A: Help Identifying And Replacing Hubs And Spindles On An Old Trailer
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Shop: Ladder Rack
- Search Results: trailer spindles
- Video: Square #84 Spindle for 3,500-lb Trailer Axles: The Breakdown
- Video: Comprehensive Review: Eye Bolts for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars
- Q&A: Availability of 1 Inch Diameter Trailer Spindle To Fit on 1.25 Square Axle
- Q&A: How to Pick Out Replacement Hubs for a Boat Trailer
- Search Results: 1~1/2 inch diameter trailer spindles
- Shop: Eye Bolts for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars - 250 lbs - Qty 2
- Shop: Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters - 68" Crossbars
- Shop: Trailer Hitch
- Q&A: Correct 5-Lug Hub for Square #84 Spindle TRU47FR
- Q&A: Trailer Idler Hub with 5 on 4-1/2 Bolt Pattern that Fits a 1 Inch Diameter Straight Spindle
- Q&A: Recommended Hubs, Bearings, Wheels and Tires for Small Tandem Axle Trailer
- Q&A: Spindle Recommendation for Trailer Hub with Bearing Dimensions of 1.25 and 1.75 inch
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Setting up the Curt Trailer Hitch Receiver on a 2024 Kia Telluride
- Search Results: trailer suspension parts
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
on Trailer Brakes
