Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Steve, we have the bearings you need but we don't have them in a kit like you are looking for. So you would need them individually with the part #LM67048 and #L44649. Then for a grease seal you would want the part #58846. Do you need the…
view full answer...The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…
view full answer...Hey Barry, thanks for reaching out. So the measurements we list for the #TRU44FR spindle are correct, but it looks like the picture they use above the chart is a generic image of a spindle, and it not an exact picture of the #TRU44FR spindle. I…
view full answer...A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…
view full answer...To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.
view full answer...Based on the pictures you attached and the outer bearing measurement you provided, it appears that you have 1-1/16 inch spindle like the BTR EZ Lube Spindle #TRU44FR. This particular spindle is designed for 2,000 pound axles and will use the same…
view full answer...I don't have reference that lists which grease seal the hub on your trailer uses. In order to recommend the correct grease seal, I'll need some information from you. I'll need the inner bearing reference number and the diameter of the…
view full answer...You will need to measure the diameter of the spindles where the seal and bearings ride. Check out the picture I attached that shows where this is. You will need an exact measurement so either a digital or dial caliper will be needed. To pick out the…
view full answer...We offer the correct replacement for you. If you have EZ-Lube spindles, use #8-259-5UC1-EZ or #8-259-5UC1 for standard spindles. The hub includes the L44649 inner and outer bearings, the L44610 inner and outer race, the 10-9 grease seal, the dust cap…
view full answer...One way to determine the lift and jack height you need would be to measure the jack you currently have on your 2018 Intech Luna RV. If this is not possible, or you still aren't sure, you can also determine the correct jack using the coupler…
view full answer...I can absolutely understand not wanting to take your hub apart to find the right replacement hub, but unfortunately that is the only option as the numbers you referenced are not any type of indicator of a replacement. So, to determine the correct hub…
view full answer...Yup, you're right on the money! The Trailer Idler Hub Assembly for 2K Axles #AKIHUB-545-2-LF-2K is what you're wanting for the Dexter Trailer Axle Beam with Standard Spindles #T20BTR-7258. Attached are some review videos for you to check…
view full answer...