Which Grease Seal for Trailstar Boat Trailer
Updated 04/02/2015 | Published 04/01/2015 >
Question:
I have a PT 175 tracker boat I need the part # for hub rear seal for trailstar trailer can you help.
asked by: Ronnie C
Expert Reply:
I don't have reference that lists which grease seal the hub on your trailer uses.
In order to recommend the correct grease seal, I'll need some information from you. I'll need the inner bearing reference number and the diameter of the spindle where the grease seal rides. When you measure the spindle diameter, you'll need to use a highly accurate measuring tool like a digital caliper.
Once I have that information, I'd be happy to recommend a grease seal for you.
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- Without Flange
- L44649
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: 48x12
- Search Results: bt8 spindle
- Search Results: btr spindle
- Search Results: bt8 hub
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range B
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Replacement Hub Assembly for Demco Kar Kaddy, Tow IT II, or Penske Tow Dolly - Qty 1
- Search Results: trailer seal
- Search Results: ad2527e grease seal
- Q&A: What Air Pressure Should I Run in My Trailer Tires?
- Search Results: 125255uc
- Q&A: Bearing Kit that Fits Hubs of 2000 Tracker TrailStar Trailer
- Q&A: Replacing A 125255UC Double Lip Grease Seal
- Q&A: What Are Dimensions Of The BTR E-Z Lube Spindle for 2,000-lb Trailer Axles TRU44FR?
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Lighting Requirements



Mike L.
4/2/2015
I don't have any reference source that would tell me which grease seal your trailer would use. To determine which seal you need, I'll need the reference number from the inner wheel bearing and the diameter of the spindle surface where the grease seal rides. To get the spindle diameter, you'll need to use a highly accurate measuring device, like a digital caliper. If you can provide me with this information, I'd be happy to recommend a grease seal for you.