Recommended Replacement for Dexter 8-259 Idler Hub

Updated 04/15/2021 | Published 04/12/2021

Products Featured in This Question

Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized

(142)

$45.28

Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings

(902)

$72.36

Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased

(386)

$89.51

Question:

I have an unmarked 5x8 utility trailer with a BTR short spindle 2 1/8 I have L44649 bearings , cap and seal already will your 8-259-50 Hub work for me ? It is different than the one you originally suggested but now i know i have a short hub, not the standard size thanks

asked by: Ricky J

Expert Reply:

We offer the correct replacement for you. If you have EZ-Lube spindles, use # 8-259-5UC1-EZ or # 8-259-5UC1 for standard spindles. The hub includes the L44649 inner and outer bearings, the L44610 inner and outer race, the 10-9 grease seal, the dust cap and lug nuts.

expert reply by: Mike L

Rick

4/12/2021

Mike L.

4/15/2021

According to Dexter, the # 8-259-50 you'd referenced would be a direct replacement for your existing idler hub, so no worries about the fitment there. However, instead of the # 8-259-50, if you went with either of the hubs I originally recommended ( # 8-259-5UC1-EZ for E-Z Lube or # 8-259-5UC1 for standard spindles) the bearings, races, grease seal, dust cover and lug nuts would also be included. Because these hubs have the same 8-259 prefix as your existing hub, they'll be the correct replacement.