Looking for Bearings LM67048 and L44649 for Dexter D30 Axles

Question

Question:

I have a 2013 Starcraft TravelStar 229TB. It has Dexter D30 axles. According to the Dexter documentation the inner bearing cone is LM67048 and the outer bearing cone is L44649. I was having trouble finding a bearing replacement kit that had those 2 sizes together. Do you have such a kit? Thanks!

asked by: Steve Z

0

Expert Reply:

Hey Steve, we have the bearings you need but we don't have them in a kit like you are looking for. So you would need them individually with the part # LM67048 and # L44649. Then for a grease seal you would want the part # 58846. Do you need the races as well?

expert reply by: Jameson C

0

Steve Z.

3/10/2026

Thank you, Jameson! Much appreciated!

Jameson C.

3/10/2026

@SteveZ Glad to help!

Answer 1

Hello Gilbert, thanks for reaching out. We do have brakes and hubs for Dexter 4,400 lb axles, but the sizing for these 4.4K axles can be funky depending when they were made. The best way to confirm what you need is with the casting number on the…

view full answer...

Answer 2

Hey Mark, yes the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer #UF19-950600 that you referenced does fit your Grand Design Reflection 303RLS and would work great. King pins are basically all the same size and this has a height range that would…

view full answer...

Answer 3

Hey Darryl, thanks for reaching out. Yeah, you definitely got a little carried away on the grease, and you’re not the first one to do it after watching a few videos. 14 oz is way too much, and what happens is exactly what you saw, it pushes past the…

view full answer...

Answer 4

Hey, Scott. We have exactly what you need. The Dexter bearing kit part #DX86ER comes with everything that you need to replace the bearings, races, and seals. This kit is a per wheel set so you will need to order 2 for one axle. What other maintenance…

view full answer...

Answer 5

Though we do have the replacement bearings, races, and seals available for your Hadco 3109 hub (which I have listed below), the combination used will not have an equivalent replacement hub available, unfortunately. Replacement Trailer Hub Bearing…

view full answer...

Answer 6

Hi JME; the Furrion Chill Cube Remote only works with the AC unit. It cannot operate a furnace. The ADB #LC64DX works with any duct style. Since this is a ducted setup you will need one of the following systems: -Furrion Chill Cube RV Air Conditioner…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Looking for Bearings LM67048 and L44649 for Dexter D30 Axles

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching