What Are Dimensions Of The BTR E-Z Lube Spindle for 2,000-lb Trailer Axles TRU44FR?
Updated 11/14/2025 | Published 10/14/2025 >
Question:
Your diagram for the BTR TRU44FR spindle shows the stub ‘A’ to be 1.25” and ‘B’ to be 1.5” although ‘A’ appears to be larger than ‘B’. Then ‘C’ shows to be 1.06” and ‘D’ to be 1.06” while showing ‘D’ to be smaller than ‘C’ Are these dimensions true?
asked by: Barry C
Expert Reply:
Hey Barry, thanks for reaching out. So the measurements we list for the # TRU44FR spindle are correct, but it looks like the picture they use above the chart is a generic image of a spindle, and it not an exact picture of the # TRU44FR spindle. I edited a picture to show the dimensions a bit more accurately. I hope this helps.

Barry C.
11/13/2025
Yes, I find a lot of times the measurements say one thing but when the part arrives they are not correct which cause delays in production as I then need to order the correct tubing to fit the part. This is more common on the parts I get from the evil empire (Amazon)

Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- Without Flange
- L44649
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Search Results: hydraulic cylinders
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: bt8 hub
- Search Results: single axle fender
- Search Results: a frame coupler
- Search Results: swivel jacks trailer jack
- Search Results: rims
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Search Results: channel
- Q&A: What Size Axle Does a #84 Spindle Fit
- Video: Review of CE Smith Trailer Fenders - No Step - CES83WR
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS



Jesse M.
11/13/2025
Hey Barry, did the updated picture clear up the confusion about the spindle dimensions on your BTR E-Z Lube Spindle? It’d be great to know if the corrected diagram matched what you were seeing. Your feedback could help others double-check their own spindle measurements.