To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. To locate this harness, you will have to pull back some of the trunk liner. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Shipping, excellent. Packaging was good, the boxing could use 3 reinforcing points. Instructions spot on. Receiver very easy to install. Wiring harness install a little more in-depth. Running the power/ hot wire from battery to receiver while laying on your back, watching for pinch points, chafing areas & exhaust & Ty wrapping is a 2 hr job. Receiver & harness 4 hours start to finish. Watch videos first, save yourself $[XX]-$[XX] dollars by doing a fairly simple install !
While I have not installed it the connections all appear to be correct. Good instructions. I had an issue with delivery however but no fault of etrailer. The package went from Missouri to Indianapolis, then to Arizona, then back to Ohio then to me in Pennsylvania. Took extra 3 days to arrive.
Easy to install. Watch the video and it guides you through every step including tips for the challenging parts. Thank you!
Arrived quickly and was easy to install by video instructions.
This is the 3rd or 4th trailer hitch I've ordered over the years. Always a perfect fit.
Works perfect. great install video
The installation was easy, and their video on the installation helped along the way. The shipment arrived fast and on time.
I installed this wire harness yesterday to my 2025 Telluride and worked perfect and the video was very helpful.
Easy installation. Works well
I viewed the video for the C29ZV and it was help full BUT in the video the control box that you run a wire to the battery to is on the driver side were there is all kinds of room were he zipe ties it to the factory harness but the C29ZV harness I got the control box is on the passenger side and you have to mount it above the muffler . that is stupid. All you have to do is make the green wire short and the yellow and brown long and it will work like it is in the video. CHUCK
Excellent video installs easily
Wonderful product and easy to install.
Good, except the directions were backwards stating the green wire goes to the drivers side and the yellow wire to the right, but the yellow goes to the driver's side (left) and the green to the right.
Very good CSR support in getting the right wiring harness identified.
Fast shipper
Looks great so far. Install8ng this wee kend.
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.