The Coach Air Kit for Air Force One Supplemental Braking System part #SM99627 includes the motor home installation components that come with the full kit Air Force One system part #SM99243. Keep in mind the coach air kit is only half the kit of a…
The HammerBlow Trailer Coupler, like the #BD028463 is a coupler that will mount to the from frame of a trailer and be used to attach to a hitch ball on the back of a vehicle. It mounts to 50 degree A-Frame Tongue and will couple to a 2-5/16 in hitch…
Since your 2020 Ford Explorer does not have the factory towing package the trailer wiring harness you'll need is the Tekonsha part #118599 which plugs inline with the taillights of the vehicle to give you a 4-way. This would work great with the…
Installing the E-Track system to your enclosed trailers upright frame is a good idea for the strongest mounting location and cutting the plywood out to fit around the E-Track would not be an issue that I can see as long as the plywood sides have…
There are going to be two parts to the handle that you will need to operate the Lippert Components Spare Tire Winch part #LC159056. The first of which is the intermediate shaft or what Lippert calls a Crank Extension part #LC1315411. This will be…
I did some digging and I cannot find any info on if there is a brake controller port under the dash of your truck. Doesn't mean there isn't one but I can't find any info on it or any other year F-650 as well. I'd be inclined to…
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…
First thing I'd check is to see if the spindle nut is on too tight. If the brakes are tensioned properly and there's still more drag on one when than the other most likely somebody tightened the spindle nut too much. The spindle nut needs to…
Hello Kevin, thanks for reaching out. Since you have already driven with these brakes a lot, the shoes should be properly seated to the drum. New breaks do need to be broken in to get full braking power. This is usually done by speeding the truck up…
I called a few of our pintle hook manufacturers as well as went out to our warehouse to measure some for you. Unfortunately, none of them will accept a 2" thick lunette ring. The majority of them are designed for a 1-3/4" thick ring like…
Hey Dusty, I emailed the manufacturer to get the dimensions you are looking for on the #ABS56FR and the overall length is 5-5/32” with the hole spacing of 3-29/32” center to center.
Filters
